Hovatek Forum HARDWARE SIM / Network unlock HUAWEI E5573Cs-322 Balong Loader Issue
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


HUAWEI E5573Cs-322 Balong Loader Issue

HUAWEI E5573Cs-322 Balong Loader Issue

simiolu
simiolu
simiolu
Newbie
3
18-03-2021, 09:47 AM
#1



So I'm following the instructions in this thread https://www.hovatek.com/forum/thread-16772.html

My Huawei E5573Cs -322 modem runs exactly the same software and web UI version whose screenshot was included in the thread. But when I try to load the usbloader included in the download using Balong USB Downloader, all I get is a prompt but the flashing never starts.

Attached are the relevant screenshots. Please help me out.

Thanks
This post was last modified: 18-03-2021, 09:49 AM by simiolu.
Attached Files
.png
Screenshot 2021-03-18 093858.png
Size: 64.41 KB / Downloads: 26
.png
Screenshot 2021-03-18 094330.png
Size: 57.18 KB / Downloads: 22
.png
Screenshot 2021-03-18 094608.png
Size: 620.43 KB / Downloads: 22
X3non
X3non
X3non
Recognized Contributor
22,062
19-03-2021, 10:31 AM
#2
(18-03-2021, 09:47 AM)simiolu So I'm following the instructions in this thread https://www.hovatek.com/forum/thread-16772.html

My Huawei E5573Cs -322 modem runs exactly the same software and web UI version whose screenshot was included in the thread. But when I try to load the usbloader included in the download using Balong USB Downloader, all I get is a prompt but the flashing never starts.

Attached are the relevant screenshots. Please help me out.

Thanks

check the requirements section and install bos registry fix
also use usblsafe rather than usbloader to prevent nvram from been erased (you won't loose the reset button, imei and sn number)
simiolu
simiolu
simiolu
Newbie
3
20-03-2021, 09:51 AM
#3
(19-03-2021, 10:31 AM)X3non
(18-03-2021, 09:47 AM)simiolu So I'm following the instructions in this thread https://www.hovatek.com/forum/thread-16772.html

My Huawei E5573Cs -322 modem runs exactly the same software and web UI version whose screenshot was included in the thread. But when I try to load the usbloader included in the download using Balong USB Downloader, all I get is a prompt but the flashing never starts.

Attached are the relevant screenshots. Please help me out.

Thanks

check the requirements section and install bos registry fix
also use usblsafe rather than usbloader to prevent nvram from been erased (you won't loose the reset button, imei and sn number)

Thank you for the reply.

After using the bos registry fix, it proceeds. I also used the usblsafe file to do the loading.

But on trying to run the firmware update (E5573cs_Update_21.318.99.03.00), I get error code 13 update failed. Screenshot attached
This post was last modified: 20-03-2021, 09:52 AM by simiolu.
Attached Files
.png
Screenshot 2021-03-20 095047.png
Size: 37.15 KB / Downloads: 13
X3non
X3non
X3non
Recognized Contributor
22,062
22-03-2021, 09:17 AM
#4
(20-03-2021, 09:51 AM)simiolu Thank you for the reply.

After using the bos registry fix, it proceeds. I also used the usblsafe file to do the loading.

But on trying to run the firmware update (E5573cs_Update_21.318.99.03.00), I get error code 13 update failed. Screenshot attached

retry again using the usbloader instead
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram