MTK phone bricked
MTK phone bricked
(09-04-2021, 03:37 PM)angelgar Hello and first of all i'm not sure if this is the correct place to post my question if not sorry i am new here.
well i have a oukitel wp6 phone that all of a sudden went into factory mode loop tried reeboting, wipe and restore factory settings many times and nothng so decided to flash with sp tool fist tried with tool from original oukitel page with costum rom diidn't work, so tried with sp tool and MTK tool had problems with verification tried 3 diffrent rom including custom rom from original oukitel page, same problem so tried bypassing with libusb and bypass utility master and exploits original MTK USB VCOM drivers all seemed to go well but when tried to flash with sp flash tool i must have done something very wrong now my phone is dead no light no boot the sp flash tool doesn't even reconize the phone when i try to flash the boot loader. anyway my question is is this it or is there still a posibility to recover my phone?
any help will be very apreciated.
thank you,
angel
(10-04-2021, 06:15 PM)angelgar Yes download only, i flashed preloader succesfully but when tried to flash rom. this error came up ( verified boot enabled please download signed image (md1img-verified.img) or disable verified boot). i tried many roms even from the oukitel oficial web page but always the same error.
This is why i used libusb wich It works succesfully but bypass utility maneger reconizes the phone and starts
working but then disconects and doesn't finish. i just don't know what else to try.
(12-04-2021, 03:32 PM)angelgar Do you mean individually one by one ?
Well i will try that and see what happens.
i tried one file at a time and it comes up with the same error no matter what file i try to flash.
i am getting really fustraded, i don't know what else to do or if i am doing somthing wrong.
(12-04-2021, 03:32 PM)angelgar Do you mean individually one by one ?
Well i will try that and see what happens.
i tried one file at a time and it comes up with the same error no matter what file i try to flash.
i am getting really fustraded, i don't know what else to do or if i am doing somthing wrong.
(13-04-2021, 09:14 PM)kelvinchinedu Did u unlock the bootloader?
Just open up Ur phone battery point, disconnect it and reconnect it thick only preloader don't click download connect Ur dead phone and keep pressing Vol - and check Ur device manager, when u see mt67** vcom preloader be very fast and disconnect the USB from PC(the big USB terminal that connects to PC and don't disconnect the micro USB that connects Ur phone terminal ) and quickly click download . This time it will be successful and Ur phone will boot to oukitel logo only .Put it in fastboot mode with key compination and unlock Ur phone and flash vbmeta .after u have done these ,u can flash any ROM easily without error.