Hovatek Forum MOBILE Android [Please help] Nokia 5.1 (MTK) Serial Number Repair/Change
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Nokia 5.1 (MTK) Serial Number Repair/Change

[Please help] Nokia 5.1 (MTK) Serial Number Repair/Change

dankar
dankar
dankar
Experienced Member
97
12-03-2021, 05:36 PM
#1



Hello, for my phone "hacking" experiments I need to repair/change the serial number of NOKIA 5.1 TA-1075 with MTK chip
It is already possible to repair/change IMEI on this model by using MAUI META, but I can't find a solution for the serial number, do you guys know how to do it? thanks!
maxpayne
maxpayne
maxpayne
Contributor
2,873
13-03-2021, 02:26 PM
#2
(12-03-2021, 05:36 PM)dankar Hello, for my phone "hacking" experiments I need to repair/change the serial number of NOKIA 5.1 TA-1075 with MTK chip
It is already possible to repair/change IMEI on this model by using MAUI META, but I can't find a solution for the serial number, do you guys know how to do it? thanks!

Check the important notice section of the first post at https://www.hovatek.com/forum/thread-12328.html
dankar
dankar
dankar
Experienced Member
97
14-03-2021, 08:57 PM
#3
I tried with Maui META ver 9.1724.25, when the barcode dialog is open I write the new serial number and upload it to the phone, it says the operation was succesful but when I restart the phone the old serial is unchanged. Any advice here?

I also tried with the latest Modem META ver 10.2044.0.02 but it's missing the barcode option, I can reach a barcode line like in the picture below but I have no clue what to do there:
Attached Files
.png
Capture.PNG
Size: 141.4 KB / Downloads: 11
maxpayne
maxpayne
maxpayne
Contributor
2,873
18-03-2021, 08:18 AM
#4
(14-03-2021, 08:57 PM)dankar I tried with Maui META ver 9.1724.25, when the barcode dialog is open I write the new serial number and upload it to the phone, it says the operation was succesful but when I restart the phone the old serial is unchanged. Any advice here?

I also tried with the latest Modem META ver 10.2044.0.02 but it's missing the barcode option, I can reach a barcode line like in the picture below but I have no clue what to do there:

Did you factory reset after writing Serial number?
dankar
dankar
dankar
Experienced Member
97
18-03-2021, 03:26 PM
#5



I did not factory reset after writing sn, I try and update
dankar
dankar
dankar
Experienced Member
97
08-04-2021, 03:57 PM
#6
Update: I did factory reset, serial number has not changed.
Also: after the operation in the post above I tried changing and reading the barcode with Maui META ver 9.1724.25.00 and also Modem META ver 10.2044.0.02, both the software can read the NEW serial number I wrote but the phone itself under settings, about phone, model and hardware, serial number, still has the old serial also after factory reset!

Do serial numbers have a format they must follow? Why even though I wrote a new one the phone shows the old one, what am I doing wrong?
This post was last modified: 08-04-2021, 04:00 PM by dankar.
dankar
dankar
dankar
Experienced Member
97
13-04-2021, 06:17 PM
#7
I found this thread that maybe gives a solution https://www.hovatek.com/forum/thread-36457.html
the user who has a Nokia 1 Plus MT6739 said he changed the scatter file but it is not clear how and if I should do the same with my nokia 5.1 mt6755
freshtyt
freshtyt
freshtyt
Senior Member
2,949
14-04-2021, 11:33 AM
#8
(13-04-2021, 06:17 PM)dankar I found this thread that maybe gives a solution https://www.hovatek.com/forum/thread-36457.html
the user who has a Nokia 1 Plus MT6739 said he changed the scatter file but it is not clear how and if I should do the same with my nokia 5.1 mt6755

what he meant is that he made a backup of proinfo then modified the sn using hxd and flashed the modified_proinfo back to his phone
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram