Hovatek Forum MOBILE Android Infinix X604 firmware backup
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Infinix X604 firmware backup

Infinix X604 firmware backup

Pages (2): 1 2 Next
MeeDoo74
MeeDoo74
MeeDoo74
Junior Member
17
05-05-2021, 04:07 AM
#1



i tried to backup my mobile's firmware using wwr_mtk tool and sp flash tool method @ https://www.hovatek.com/forum/thread-21970.html but I stopped at step number 17 and i cant make the memory test then i moved to the alternative method @ https://www.hovatek.com/forum/thread-22701.html and i stopped again at step 1 again because when i follow this guide @ https://www.hovatek.com/forum/thread-526.html and when start mtk droid tools my phone not detected and i check my drivers and its properly installed and now i cant take a backup from my firmware
Can any one help me ?
This post was last modified: 05-05-2021, 04:15 AM by MeeDoo74.
X3non
X3non
X3non
Recognized Contributor
22,062
05-05-2021, 12:21 PM
#2
(05-05-2021, 04:07 AM)MeeDoo74 i tried to backup my mobile's firmware using wwr_mtk tool and sp flash tool method @ https://www.hovatek.com/forum/thread-21970.html but I stopped at step number 17 and i cant make the memory test then i moved to the alternative method @ https://www.hovatek.com/forum/thread-22701.html and i stopped again at step 1 again because when i follow this guide @ https://www.hovatek.com/forum/thread-526.html and when start mtk droid tools my phone not detected and i check my drivers and its properly installed and now i cant take a backup from my firmware
Can any one help me ?

there's nothing in the guide that has to do with mtk droid tool
see https://www.hovatek.com/forum/thread-22701.html ; in step 1, you're to use the empty scatter file you made from the parent guide
MeeDoo74
MeeDoo74
MeeDoo74
Junior Member
17
06-05-2021, 06:14 PM
#3
(05-05-2021, 12:21 PM)X3non
(05-05-2021, 04:07 AM)MeeDoo74 i tried to backup my mobile's firmware using wwr_mtk tool and sp flash tool method @ https://www.hovatek.com/forum/thread-21970.html but I stopped at step number 17 and i cant make the memory test then i moved to the alternative method @ https://www.hovatek.com/forum/thread-22701.html and i stopped again at step 1 again because when i follow this guide @ https://www.hovatek.com/forum/thread-526.html and when start mtk droid tools my phone not detected and i check my drivers and its properly installed and now i cant take a backup from my firmware
Can any one help me ?

there's nothing in the guide that has to do with mtk droid tool
see https://www.hovatek.com/forum/thread-22701.html ; in step 1, you're to use the empty scatter file you made from the parent guide

after do the step number 20 i dont get the window that appeared in step number 21 and this what i get
Attached Files
.png
Capture.PNG
Size: 62.95 KB / Downloads: 3
X3non
X3non
X3non
Recognized Contributor
22,062
07-05-2021, 10:28 AM
#4
(06-05-2021, 06:14 PM)MeeDoo74 after do the step number 20 i dont get the window that appeared in step number 21 and this what i get

rom2 you selected, what does it contain?
MeeDoo74
MeeDoo74
MeeDoo74
Junior Member
17
07-05-2021, 06:08 PM
#5



(07-05-2021, 10:28 AM)X3non
(06-05-2021, 06:14 PM)MeeDoo74 after do the step number 20 i dont get the window that appeared in step number 21 and this what i get

rom2 you selected, what does it contain?

it contains a full readback of EMMC_USER using the value I got from the RAM test but i named the file as ROM_2 because i have file named ROM_1 that i get from readback of Region EMMC_USER with start address and partition size to get the the full length address as step 1 here @ https://www.hovatek.com/forum/thread-22701.html
X3non
X3non
X3non
Recognized Contributor
22,062
08-05-2021, 03:36 AM
#6
(07-05-2021, 06:08 PM)MeeDoo74 it contains a full readback of EMMC_USER using the value I got from the RAM test but i named the file as ROM_2 because i have file named ROM_1 that i get from readback of Region EMMC_USER with start address and partition size to get the the full length address as step 1 here @ https://www.hovatek.com/forum/thread-22701.html

delete or rename that rom_1, you can rename to pgpt
rename rom_2 to rom_1 then place in the same folder location as rom_0
use wwr v2.51, select rom_0 , it'll automatically select rom_1 as well ; see the video guide @ https://youtu.be/pj4iFakq33M
MeeDoo74
MeeDoo74
MeeDoo74
Junior Member
17
08-05-2021, 08:08 AM
#7
(08-05-2021, 03:36 AM)X3non
(07-05-2021, 06:08 PM)MeeDoo74 it contains a full readback of EMMC_USER using the value I got from the RAM test but i named the file as ROM_2 because i have file named ROM_1 that i get from readback of Region EMMC_USER with start address and partition size to get the the full length address as step 1 here @ https://www.hovatek.com/forum/thread-22701.html

delete or rename that rom_1, you can rename to pgpt
rename rom_2 to rom_1 then place in the same folder location as rom_0
use wwr v2.51, select rom_0 , it'll automatically select rom_1 as well ; see the video guide @ https://youtu.be/pj4iFakq33M

Well, i did everything correctly, but why can't SP Flashtool recognize the extracted files (on the right) in a correct way? and why the wwr mtk extracted every thing to 2 files (like boot_a and boot_b)
This post was last modified: 08-05-2021, 08:12 AM by MeeDoo74.
Attached Files
.png
Screenshot (45).png
Size: 205.05 KB / Downloads: 2
X3non
X3non
X3non
Recognized Contributor
22,062
08-05-2021, 11:28 AM
#8
(08-05-2021, 08:08 AM)MeeDoo74 Well, i did everything correctly, but why can't SP Flashtool recognize the extracted files (on the right) in a correct way? and why the wwr mtk extracted every thing to 2 files (like boot_a and boot_b)

not sure what option you selected to cut the rom, you should select the option to "cut as it is" i.e if you are unsure what to select. it should cut everything and make them selectable in sp flash tool
having boot_a and boot_b means the device uses A/B partitioning system ; refer to https://source.android.com/devices/tech/ota/ab
MeeDoo74
MeeDoo74
MeeDoo74
Junior Member
17
08-05-2021, 12:44 PM
#9
(08-05-2021, 11:28 AM)X3non
(08-05-2021, 08:08 AM)MeeDoo74 Well, i did everything correctly, but why can't SP Flashtool recognize the extracted files (on the right) in a correct way? and why the wwr mtk extracted every thing to 2 files (like boot_a and boot_b)

not sure what option you selected to cut the rom, you should select the option to "cut as it is" i.e if you are unsure what to select. it should cut everything and make them selectable in sp flash tool
having boot_a and boot_b means the device uses A/B partitioning system ; refer to https://source.android.com/devices/tech/ota/ab

I choose " cut as it is " option and that what i get
X3non
X3non
X3non
Recognized Contributor
22,062
10-05-2021, 01:05 PM
#10



(08-05-2021, 12:44 PM)MeeDoo74 I choose " cut as it is " option and that what i get

that's good then, so you got your backup
Pages (2): 1 2 Next
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram