Hovatek Forum MOBILE Dual OS Tablets Cube i10 flashing and installing problems
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Cube i10 flashing and installing problems

Cube i10 flashing and installing problems

arielamadio
arielamadio
arielamadio
Newbie
3
13-06-2021, 12:49 AM
#1



Hi
I have a Cube i10. I wanted to remove everything to start a fresh Windows and Android installation, since Android stopped working.
The first question is which version should I download and install? I have version i10-W, i10-BW and i10-B. Mine has starts with i10R32GB15... but the only one with that number are Remix, so I already gave a try...
I tried all firmwares for flashing android and none worked. Since I didn't knew which will work, tried all of them... All gave me this on MFT

06/12/21 20:39:26.140 DEBUG : Using GP_Flag: 0x80000045
06/12/21 20:41:26.258 DEBUG : Port 0/0/1 #0: FlashManager::do_new_soc_device on port 1
06/12/21 20:41:26.258 INFO : do_new_medfield_device STARTING TO FLASH
06/12/21 20:41:26.258 DEBUG : Port 0/0/1 #0: New device detected - SN : Baytrail84149C56
06/12/21 20:41:26.258 DEBUG : New SOC device -> serial: Baytrail84149C56 port: 1
06/12/21 20:41:26.259 INFO : Port 0/0/1 #0: DNX/droidboot phase - SN : Baytrail84149C56
06/12/21 20:41:26.259 DEBUG : Port 0/0/1 #0: OSLOADER = C:/i10-remix/android/efilinux-userdebug.efi
06/12/21 20:41:26.259 DEBUG : Port 0/0/1 #0: Flashing osloader ... "C:/Program Files (x86)/Intel/Manufacturing Flash Tool/fastboot.exe" -s Baytrail84149C56 flash osloader "C:/i10-remix/android/efilinux-userdebug.efi"
06/12/21 20:41:26.802 DEBUG : Port 0/0/1 #0: SOC Device is disconnected - state:1 - status - Booting to droidboot
06/12/21 20:41:26.802 DEBUG : SOC device lost on port 1

So, that's my most important question. I get SOC device lost all the time. Or this is because the firmware is not correct.
In the later anyone had an idea how to get it? I followed the instructions precisely, all the time.
Again, it's a Cube i10 that came with windows 10 + Android.
Any help will be appreciated.
Ariel
freshtyt
freshtyt
freshtyt
Senior Member
2,949
14-06-2021, 03:56 PM
#2
(13-06-2021, 12:49 AM)arielamadio Hi
I have a Cube i10. I wanted to remove everything to start a fresh Windows and Android installation, since Android stopped working.
The first question is which version should I download and install? I have version i10-W, i10-BW and i10-B. Mine has starts with i10R32GB15... but the only one with that number are Remix, so I already gave a try...
I tried all firmwares for flashing android and none worked. Since I didn't knew which will work, tried all of them... All gave me this on MFT

06/12/21 20:39:26.140 DEBUG : Using GP_Flag: 0x80000045
06/12/21 20:41:26.258 DEBUG : Port 0/0/1 #0: FlashManager::do_new_soc_device on port 1
06/12/21 20:41:26.258 INFO : do_new_medfield_device STARTING TO FLASH
06/12/21 20:41:26.258 DEBUG : Port 0/0/1 #0: New device detected - SN : Baytrail84149C56
06/12/21 20:41:26.258 DEBUG : New SOC device -> serial: Baytrail84149C56 port: 1
06/12/21 20:41:26.259 INFO : Port 0/0/1 #0: DNX/droidboot phase - SN : Baytrail84149C56
06/12/21 20:41:26.259 DEBUG : Port 0/0/1 #0: OSLOADER = C:/i10-remix/android/efilinux-userdebug.efi
06/12/21 20:41:26.259 DEBUG : Port 0/0/1 #0: Flashing osloader ... "C:/Program Files (x86)/Intel/Manufacturing Flash Tool/fastboot.exe" -s Baytrail84149C56 flash osloader "C:/i10-remix/android/efilinux-userdebug.efi"
06/12/21 20:41:26.802 DEBUG : Port 0/0/1 #0: SOC Device is disconnected - state:1 - status - Booting to droidboot
06/12/21 20:41:26.802 DEBUG : SOC device lost on port 1

So, that's my most important question. I get SOC device lost all the time. Or this is because the firmware is not correct.
In the later anyone had an idea how to get it? I followed the instructions precisely, all the time.
Again, it's a Cube i10 that came with windows 10 + Android.
Any help will be appreciated.
Ariel

there's an i10 remix os @ http://203.81.161.200/Upload/i10-remixos-2016011103.zip incase you want to try it
arielamadio
arielamadio
arielamadio
Newbie
3
15-06-2021, 01:09 PM
#3
Yes, I have that version of remixOS downloaded and tried to install it, but I get always the same error, flashing is interrupted with the error showed above (SOC lost immediately after connecting USB port).
Any help would be appreciated
hovatek
hovatek
hovatek
Administrator
49,570
22-06-2021, 02:25 PM
#4
(15-06-2021, 01:09 PM)arielamadio Yes, I have that version of remixOS downloaded and tried to install it, but I get always the same error, flashing is interrupted with the error showed above (SOC lost immediately after connecting USB port).
Any help would be appreciated

Is your flash drive connected directly to the tab or via a keyboard?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
arielamadio
arielamadio
arielamadio
Newbie
3
22-06-2021, 03:21 PM
#5



Hi, is directly connected.
I tried a lot of things, even delete eMMC from BIOS, and nothing.
Now, trying to install windows 10, I realize that diskpart only detect a 7.4Gb disk. It's is a 32Gb in theory.
Any idea? Can I boot from some other OS to format or trying to fix the disk? I tried Ubuntu, but it not possible from a bootable device.
I'm lost, there is no way to start the device or install anything.
The disk now is my main concern. How can I delete everything and recover the full disk? Any booting system to access?
Thanks
hovatek
hovatek
hovatek
Administrator
49,570
22-06-2021, 04:41 PM
#6
(22-06-2021, 03:21 PM)arielamadio Hi, is directly connected.
I tried a lot of things, even delete eMMC from BIOS, and nothing.
Now, trying to install windows 10, I realize that diskpart only detect a 7.4Gb disk. It's is a 32Gb in theory.
Any idea? Can I boot from some other OS to format or trying to fix the disk? I tried Ubuntu, but it not possible from a bootable device.
I'm lost, there is no way to start the device or install anything.
The disk now is my main concern. How can I delete everything and recover the full disk? Any booting system to access?
Thanks

For the manufacturing flash tool part, are you certain you're using the right VID and PID? Try a different port on your PC and a different PC
Also, share a full log of manufacturing flash tool
This post was last modified: 22-06-2021, 04:43 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram