SAMSUNG A30S CLONE HUNG ON LOGO
SAMSUNG A30S CLONE HUNG ON LOGO
(11-07-2021, 12:29 PM)laban kamonya ...
(12-07-2021, 10:57 AM)X3non(11-07-2021, 12:29 PM)laban kamonya
...
take a full firmware backup of the device as it is (you can use any tool for this e.g miracle thunder, e.t.c)
once backup is complete, format all except userdata using sp flash tool then confirm if the device is still able to boot to logo or not
(19-07-2021, 01:22 PM)X3non(19-07-2021, 07:59 AM)laban kamonya
Thanks @ X3non let me give it a try anf see if it works. I will post the results here.
Sent from my TECNO CF7 using Hovatek Mobile
correction in my previous reply, it's format all except preloader in sp flash tool
(24-07-2021, 01:18 PM)laban kamonya I did format all ,and formating was done well but on flashing the rom i got the same emmc error . And now it's dead completely i think it's emmc had a problem.
But thank you for your support.
Sent from my TECNO CF7 using Hovatek Mobile
(26-07-2021, 09:57 AM)X3non(24-07-2021, 01:18 PM)laban kamonya
I did format all ,and formating was done well but on flashing the rom i got the same emmc error . And now it's dead completely i think it's emmc had a problem.
But thank you for your support.
Sent from my TECNO CF7 using Hovatek Mobile
did you try restoring your backup? if yes, can you confirm if the device is able to power back on or not?
(11-07-2021, 10:01 PM)laban kamonya I got the firmware from paid services, but on flashing an getting the sp tool error STATUS_MMC_ERR (0XC0040030)
ANY SOLUTION?
the phone was stuck at logo
Can go into recovery but doesn't finish formating data
Can boot into fastboot but fastboot not detected on PC.
Sent from my TECNO CF7 using Hovatek Mobile