Hovatek Forum MOBILE Others Nokia (Symbian & Java) [Tutorial] How to Flash / Upgrade Nokia BB5 Phones Using Infinity Best
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Tutorial] How to Flash / Upgrade Nokia BB5 Phones Using Infinity Best

[Tutorial] How to Flash / Upgrade Nokia BB5 Phones Using Infinity Best

Pages (4): Previous 1 2 3 4
freshtyt
freshtyt
freshtyt
Senior Member
2,949
31-07-2021, 06:07 PM
#31



(31-07-2021, 09:19 AM)dpol I did that. The code is RM-495... I guessed the interface only displayed two digits of the code.

there's rm-49 and rm-495 on that list, double-check that you selected rm-495
you can type it if you must
This post was last modified: 31-07-2021, 06:07 PM by freshtyt.
dpol
dpol
dpol
Senior Member
187
01-08-2021, 05:36 PM
#32
(31-07-2021, 06:07 PM)freshtyt
(31-07-2021, 09:19 AM)dpol I did that. The code is RM-495... I guessed the interface only displayed two digits of the code.

there's rm-49 and rm-495 on that list, double-check that you selected rm-495
you can type it if you must

Oh! Thanks a lot. I did not check through the long list.

Meanwhile, it was still the same error I got. Device could not boot up. I attached the error screen in this reply.
Thanks a lot for the help.
Attached Files
.png
ErrorRR.PNG
Size: 80.82 KB / Downloads: 1
X3non
X3non
X3non
Recognized Contributor
22,062
02-08-2021, 11:48 AM
#33
(01-08-2021, 05:36 PM)dpol Oh! Thanks a lot. I did not check through the long list.

Meanwhile, it was still the same error I got. Device could not boot up. I attached the error screen in this reply.
Thanks a lot for the help.

create a new thread for this by clicking "ask question" at the top
while at it, also confirm if you have tried flashing using a different tool e.g phoenix, or using a higher firmware version than what you currently have
dpol
dpol
dpol
Senior Member
187
04-08-2021, 12:59 PM
#34
(02-08-2021, 11:48 AM)X3non
(01-08-2021, 05:36 PM)dpol Oh! Thanks a lot. I did not check through the long list.

Meanwhile, it was still the same error I got. Device could not boot up. I attached the error screen in this reply.
Thanks a lot for the help.

create a new thread for this by clicking "ask question" at the top
while at it, also confirm if you have tried flashing using a different tool e.g phoenix, or using a higher firmware version than what you currently have
Alright. I will create the thread.

Yes, I have tried using Phoenix. It was throwing some errors also.
The RM-495 firmware version I was trying to flash was v07.97, that the highest I could get online and I think it is the highest there is.
This post was last modified: 04-08-2021, 03:24 PM by dpol.
Attached Files
.png
PhoenixError.PNG
Size: 33.12 KB / Downloads: 2
pocongan
pocongan
pocongan
Newbie
1
02-09-2021, 07:55 AM
#35



nice tutorial
very useful for repair nokia
SanyoL
SanyoL
SanyoL
Newbie
1
16-02-2023, 11:49 AM
#36
Hello everyone, I'm trying to get to life Nokia E5 which is not able to boot until the end, but I'm not successful. Can you help me. Here is the log file from the flashing process:

Code:

Card found: 42455354
Registered to: NokiaUsers

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm632_102.002_prd.core.fpsx
PPM : rm632_102.002_30.01_MEA_I_prd.rofs2.fpsx
PPM2 : rm632_102.002_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm632_102.002_U010.000_prd.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     24900114199903443553506679C04EC7A8B52114
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : CCD9F80559BA50D9B3E274F9E7120BE1EE4EEA7C
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 352023041500915
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : F:\Books for Sorting\Nokia E5 Flashing\Infinity Best\Nokia Infinity Best v2.29 by MOBILE 5G\Nokia Infinity Best v2.29 by NRSolution\Backup\Cert\352023041500915_CRT_2nd.rpl

   ===Flashing [MCU]===
Erase : Processing rm632_102.002_prd.core.fpsx
Partitioning....
Partitioning OK...
Erasing....
Erasing OK...
TIME : Erase time : 00:00:01
Write : Processing rm632_102.002_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 433 blocks
TIME : Write time : 00:00:18
MCU Write done
ADL: Request programm status
NAND status : 00000005 / 00000004 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm632_102.002_30.01_MEA_I_prd.rofs2.fpsx
Erasing....
Erasing OK...
TIME : Erase time : 00:00:00
Write : Processing rm632_102.002_30.01_MEA_I_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 245 blocks
TIME : Write time : 00:00:11
PPM Write done
ADL: Request programm status
NAND status : 00000005 / 00000004 / 00000000

   ===Flashing [PPM2]===
Erase : Processing rm632_102.002_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing OK...
TIME : Erase time : 00:00:00
Write : Processing rm632_102.002_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 35 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000005 / 00000004 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm632_102.002_U010.000_prd.uda.fpsx
Erasing....
Erasing OK...
TIME : Erase time : 00:00:01
Write : Processing rm632_102.002_U010.000_prd.uda.fpsx
Total writen 97 blocks
TIME : Write time : 00:00:05
CNT Write done
ADL: Request programm status
NAND status : 00000005 / 00000004 / 00000000

ADL: Close_Session
Content: 000300000000050000000400000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:40
Reboot phone now...
Reading Phone Info....
Connected phone -   Nokia E5-00
Software Info:     V ICPR82_11w16.3.14 16-11-12 RM-632 (c) Nokia
IMEI:  352023041500915
Ape Version: 102.002
Product code:  059H8H2
Checking...
SimLock status : SimLock is OK
Security status : Security is OK
Read Info Done!
Battery voltage is enough for start
AfterFlash operations done ;D
Done!

Elapsed: 00:00:55
Connect phone on selected interface...
hovatek
hovatek
hovatek
Administrator
49,570
02-03-2023, 08:27 AM
#37
(16-02-2023, 11:49 AM)SanyoL Hello everyone, I'm trying to get to life Nokia E5 which is not able to boot until the end, but I'm not successful. Can you help me. Here is the log file from the flashing process:

Code:

Card found: 42455354
Registered to: NokiaUsers

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm632_102.002_prd.core.fpsx
PPM : rm632_102.002_30.01_MEA_I_prd.rofs2.fpsx
PPM2 : rm632_102.002_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm632_102.002_U010.000_prd.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     24900114199903443553506679C04EC7A8B52114
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : CCD9F80559BA50D9B3E274F9E7120BE1EE4EEA7C
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 352023041500915
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : F:\Books for Sorting\Nokia E5 Flashing\Infinity Best\Nokia Infinity Best v2.29 by MOBILE 5G\Nokia Infinity Best v2.29 by NRSolution\Backup\Cert\352023041500915_CRT_2nd.rpl

   ===Flashing [MCU]===
Erase : Processing rm632_102.002_prd.core.fpsx
Partitioning....
Partitioning OK...
Erasing....
Erasing OK...
TIME : Erase time : 00:00:01
Write : Processing rm632_102.002_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 433 blocks
TIME : Write time : 00:00:18
MCU Write done
ADL: Request programm status
NAND status : 00000005 / 00000004 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm632_102.002_30.01_MEA_I_prd.rofs2.fpsx
Erasing....
Erasing OK...
TIME : Erase time : 00:00:00
Write : Processing rm632_102.002_30.01_MEA_I_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 245 blocks
TIME : Write time : 00:00:11
PPM Write done
ADL: Request programm status
NAND status : 00000005 / 00000004 / 00000000

   ===Flashing [PPM2]===
Erase : Processing rm632_102.002_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing OK...
TIME : Erase time : 00:00:00
Write : Processing rm632_102.002_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 35 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000005 / 00000004 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm632_102.002_U010.000_prd.uda.fpsx
Erasing....
Erasing OK...
TIME : Erase time : 00:00:01
Write : Processing rm632_102.002_U010.000_prd.uda.fpsx
Total writen 97 blocks
TIME : Write time : 00:00:05
CNT Write done
ADL: Request programm status
NAND status : 00000005 / 00000004 / 00000000

ADL: Close_Session
Content: 000300000000050000000400000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:40
Reboot phone now...
Reading Phone Info....
Connected phone -   Nokia E5-00
Software Info:     V ICPR82_11w16.3.14 16-11-12 RM-632 (c) Nokia
IMEI:  352023041500915
Ape Version: 102.002
Product code:  059H8H2
Checking...
SimLock status : SimLock is OK
Security status : Security is OK
Read Info Done!
Battery voltage is enough for start
AfterFlash operations done ;D
Done!

Elapsed: 00:00:55
Connect phone on selected interface...

Create a thread by clicking Ask Question at the top

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (4): Previous 1 2 3 4
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram