Hovatek Forum MOBILE Android TECNO F7 (PHANTOM A) HARD BRICKED AFTER INSTALLING MELTING_ROCKS II ROM.
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


TECNO F7 (PHANTOM A) HARD BRICKED AFTER INSTALLING MELTING_ROCKS II ROM.

TECNO F7 (PHANTOM A) HARD BRICKED AFTER INSTALLING MELTING_ROCKS II ROM.

Nonzo53
Nonzo53
Nonzo53
Junior Member
36
19-04-2015, 11:39 AM
#1



Hello hovatek.
I have an issue on a phantom a (f7)
It dosnt come up again , respond to a charger or even vibrate on pressing powerkey. Here is what happend.

I was using my tecno f7 one aftrnoon , googling costom roms for tecno f7 and I found a rom claiming to change my f7 into samsung galaxy s4 and compatible with tecno f7. I neva knew the rom had a specific f7 (a+) it worked on and mine was f7 (a) without +. But I didnot know about the two type of tecno f7 and I thought the rom will work in my f7 even though I saw on the thread on how to install d rom : (WARNING (TECNO F7 PHANTOM A+ ONLY. DO NOT FLASH ON OTHER DEVICE) I thought because mine was also f7. Then d A+ stuff didn't really mean. So I went ahead to download d rom. Booted into CWM recovery , made a data wipe , cache wipe , system Format , delvic wipe and I now went ahead (select zip from sdcard) to flash d rom.

Flashing d rom went successful as it installed all files neccesary.

After d ROM flashed successfully. I now went into reboot phone and this was where the phone went off and never came on again. It doesn't even vibrate or charge.

Now I check hovatek and found a tutorial saying if fone doesn't comeup or respond to charge it means its a preloader problem then I thought back to when I was flashing d rom I didn't see anything like FLASHING PRELOADER. I only saw FLASHING UBOOT and FLASHING KERNEL. But I ignored my thoughts thinking maibe d rom damaged my preloader which was wrong but I didn't also know

I went ahead to download the same F7 (A+) specific preloader from hovatek and used spflash tool to flash in the preloader thinking atleast my phone will vibrate but unfourtunately after successfully flashing that preloader into my phantom A , my fone still didn't vibrate ,/ comeup /charge.

I now tried to flash the same preloader again but this time 

Once I click Download and plugin my phone it makes the usb connect sound and

Spflashtool detects it and loads the 1st Download (red bar) to 100% 

Then it makes a usb disconnect sound. But spflash tool remains hooked at the 100% DA redbar . Even when d fone is still hooked in to d pc via d usb but it has been disconnected from d pc due to d sound I heard. So when I pullout d usb it dosnt make anoda disconnect sound which means I am right. But even still on unplugging d fone spflash tool bar still red and at 100%. Until I press STOP download or I close the tool.

Now that is what happens anytime I connect the fone to my pc it connects , loads DA (redbar) to 100% and disconnects without disconnecting from spflash tool / displaying any error.

Is this due to the Wrong preloader flashed! ?

If yes how can I resolve it. ?

Have tried holding. Volume down , volume up , volume up+ power , volume down+ power while connecting the usb but still spflash does d same thing.

Pls advice me.
hovatek
hovatek
hovatek
Administrator
49,570
19-04-2015, 02:06 PM
#2
(19-04-2015, 11:39 AM)Nonzo53 Now that is what happens anytime I connect the fone to my pc it connects , loads DA (redbar) to 100% and disconnects without disconnecting from spflash tool / displaying any error.

Is this due to the Wrong preloader flashed! ?

If yes how can I resolve it. ?

Have tried holding. Volume down , volume up , volume up+ power , volume down+ power while connecting the usb but still spflash does d same thing.

Pls advice me.

this is mostly a driver or usb cord problem. we have both PhantomA and A+ stock backups. have you tried both? if not, supply a gmail address to download both

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Nonzo53
Nonzo53
Nonzo53
Junior Member
36
19-04-2015, 05:31 PM
#3
Ok sir . Email is nonzo54@gmail.com

Thanks sir. But sir I have a question

If a phone has a damaged or missing preloader.bin in the preloader partition or no preloader atall . , will spflashtool still detect it ? If I want to flashin anoda preloader ?

If yes then what if a Wrong preloader (for another phone) was flashed into it. Will spflash tool still detect it ?
hovatek
hovatek
hovatek
Administrator
49,570
19-04-2015, 08:38 PM
#4
(19-04-2015, 05:31 PM)Nonzo53 Ok sir . Email is nonzo54@gmail.com

Thanks sir. But sir I have a question

If a phone has a damaged or missing preloader.bin in the preloader partition or no preloader atall . , will spflashtool still detect it ? If I want to flashin anoda preloader ?

If yes then what if a Wrong preloader (for another phone) was flashed into it. Will spflash tool still detect it ?

with the right preloader and other OS files, the phone should work again
granted! download Phantom A& A+ files @ https://www.hovatek.com/forum/thread-311.html and flash using Sp flash tool @ https://www.hovatek.com/forum/thread-159.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
hovatek
hovatek
hovatek
Administrator
49,570
19-04-2015, 08:41 PM
#5



let me know how it goes

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Nonzo53
Nonzo53
Nonzo53
Junior Member
36
23-04-2015, 08:26 AM
#6
Av flashed d rom and my phone is back alive. Thanks so much Hovatek.
This post was last modified: 23-04-2015, 08:28 AM by Nonzo53.
Omegaohms
Omegaohms
Omegaohms
Respected Member
100
04-07-2015, 03:47 PM
#7
Pls. Permission to download. My email is igbuduomega@gmail.com. how do i know d difrns btwn phantom A and A+?
hovatek
hovatek
hovatek
Administrator
49,570
04-07-2015, 06:03 PM
#8
(04-07-2015, 03:47 PM)Omegaohms Pls. Permission to download. My email is igbuduomega@gmail.com. how do i know d difrns btwn phantom A and A+?

create a new thread, this is someone else's support thread

see https://www.hovatek.com/forum/thread-514.html for how to create a thread

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram