Request for permission to download tecno M3 Stock firmware/rom
Request for permission to download tecno M3 Stock firmware/rom
(30-06-2015, 03:07 PM)ehio Hi all,
I would to request permission to access tecno M3 related backup roms for flashing with SP flash tool.
I am in possession of a dual sim phone branded tecno M3 that was stuck at boot logo (old Tecno) and now completely fails to respond (no response to power button) after formating "All flash" using SP flash tool.
Kind regards
Ehi o
(30-06-2015, 03:57 PM)hovatek(30-06-2015, 03:07 PM)ehio Hi all,
I would to request permission to access tecno M3 related backup roms for flashing with SP flash tool.
I am in possession of a dual sim phone branded tecno M3 that was stuck at boot logo (old Tecno) and now completely fails to respond (no response to power button) after formating "All flash" using SP flash tool.
Kind regards
Ehi o
need to confirm you know the variant of M3 we're dealing with here.
what version of Android was the phone running on?
(30-06-2015, 04:37 PM)ehio Thank you for the quick reply.
I think it was 4.2 , is there anyway to confirm maybe by examining the contents of the SD card or from the serial number of IMEI?
(30-06-2015, 09:28 PM)hovatek(30-06-2015, 04:37 PM)ehio Thank you for the quick reply.
I think it was 4.2 , is there anyway to confirm maybe by examining the contents of the SD card or from the serial number of IMEI?
if it was 4.2, check the pics @ https://www.hovatek.com/forum/thread-311.html to confirm if it was Old or New OS
(01-07-2015, 08:48 AM)ehio I confirm from the photographs that it is the OLD OS.
Kind regards
(01-07-2015, 02:39 PM)ehio ictstab@gmail.com
(01-07-2015, 03:30 PM)hovatek(01-07-2015, 02:39 PM)ehio ictstab@gmail.com
granted! download @ https://www.hovatek.com/forum/thread-311.html and flash using Sp flash tool @ https://www.hovatek.com/forum/thread-159.html
(02-07-2015, 03:17 PM)ehio Thank you very much i have downloaded the stock ROM.
However, with the latest version of the SP Flash tool; I always get Error
'S_DA_SDMMC_WRITE_FAILED (3149)
I have tried on 2 different Windows 7 computers (both 32bit and 64bit); Also performed manual installation of MT VCOM drivers; All with the same error even when trying to flash just the preloader.bin alone
Please help!