[Tutorial] How to install Mediatek USB VCOM drivers in Windows
[Tutorial] How to install Mediatek USB VCOM drivers in Windows
(07-07-2015, 12:27 PM)lexzy Pls my ifinix zero went dead I use sp_flashtools intall necessary drivers but am getting BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail pls help i don't have money to buy new phone ....
(19-07-2015, 02:25 PM)iykenna pls share techno m3 userdata. backup file wt me. I need 1 urgently
(30-08-2015, 01:34 PM)vishal upreti hello sir i clicked on the link of mtk usb vcom drivers but its not working
it says site is banned
pls give me a proper link sir i wanna fix my bricked phone
(30-08-2015, 04:47 PM)hovatek(30-08-2015, 01:34 PM)vishal upreti hello sir i clicked on the link of mtk usb vcom drivers but its not working
it says site is banned
pls give me a proper link sir i wanna fix my bricked phone
thats because adf.ly doesnt allow indians
https://docs.google.com/uc?id=0B9srKhKuV...t=download
(03-08-2014, 01:13 PM)hovatek Requirement
1. Download MediaTek USB VCOM drivers
2. Download USB Deview ( 32 bit here : 64 bit here )
Note:
* You might need to disable drivers signature verification in Windows for this to work smoothly. see http://www.hovatek.com/forum/thread-752.html for the procedure
* If you have access to a working phone of the same model then remove the battery from the working phone and connect to PC via USB cord. Mediatek preloader VCOM drivers should be automatically installed so you can skip the rest of this guide
Procedure
# See the video tutorial below or @ http://youtu.be/sADkzyI8Z5Q
1. Install USBDeview and use it to uninstall all Vcom, Mediatek and Preloader drivers
1b. Extract the contents of the Mediatek USB VCOM file above ( The Password when extracting is Hovatek )
2. In Windows, go to Control Panel and open Device Manager
3. Click any of the device groups (any of the items on the list) you see there, then from Action menu, select Add legacy hardware
4. Add hardware wizard will be opened, click next
5. Select Install the hardware that I manually select from a list (Advanced)
6. Click next two times and click Have Disk button
7. Click browse and find where your driver's .inf file is, then select it (the .inf you'll select is located in drivers > USB Vcom driver > your OS) . Ensure to select the 64 bit .inf if your PC is 64 bit
8. Click Open and OK. You will see the drivers listed.
9. Select your driver there (select Mediatek Preloader USB VCOM Port)
10. Click Next and finish installing
11. If SP flash tool or other software still dont detect your phone then also install Mediatek DA VCOM (consider installing more from the list of drivers one at a time if need be )
12. If you get the code 10 error after the installation, simply ignore it and proceed with SP flash tool. You're only getting that error because the driver is not digitally signed.
(02-09-2015, 03:45 AM)Beastmode19 but i did all these steps but it says error installing this inf file is invalid or something like that.. what does this mean??