[Error Codes] List of sp flash tool error codes, meanings & how to fix (solution)
[Error Codes] List of sp flash tool error codes, meanings & how to fix (solution)
(01-10-2014, 12:02 PM)immanuelsons I have tried everything possible to flash my phone via sp flash tools.. I downloaded the stock rom for my tecno phantom A+ from this site.. But after flashing, my phone went blank , it turned on but didn't show the boot logo at all. Just blurred screen. What did I do wrong? I downloaded the stock mtk backup of my phone from your site.. Every file I used from this site.. Pls help
(02-10-2014, 06:20 AM)hkm1175 hi,first thank u for your work in this site and sorry for my bad english,
still have a problem with my phone model:ICE-PHONE MINI with an MTK6572,so i've brick it after i flash a "wrong recovery"
and now i'm trying to unbrick using sp-flash tool 3.1332 but it failed with error(2004)" here is the log file if needed
so please help me if you can...thank you
https://drive.google.com/file/d/0B3e4gQ7...sp=sharing
(02-10-2014, 10:51 AM)hovatekit starts on logo "ICE-PHONE" n apears connected in the device manager for 3 sec ,after that it disconnected from the device manager and show white screen,,,it repeat the same until i unpluged the usb cable it shut down....(02-10-2014, 06:20 AM)hkm1175 hi,first thank u for your work in this site and sorry for my bad english,
still have a problem with my phone model:ICE-PHONE MINI with an MTK6572,so i've brick it after i flash a "wrong recovery"
and now i'm trying to unbrick using sp-flash tool 3.1332 but it failed with error(2004)" here is the log file if needed
so please help me if you can...thank you
https://drive.google.com/file/d/0B3e4gQ7...sp=sharing
What does the phone show when you try powering it up normally?
Note: To make this easier, you could create a new thread for this issue by clicking ---> http://www.hovatek.com/forum/newthread.php?fid=4
(05-10-2014, 11:50 PM)hkm1175 it starts on logo "ICE-PHONE" n apears connected in the device manager for 3 sec ,after that it disconnected from the device manager and show white screen,,,it repeat the same until i unpluged the usb cable it shut down....
(09-10-2014, 01:55 AM)alexkos 8406 error
[size=14.3999996185303px]Model: WCDMA Malaysia.
[size=14.3999996185303px][size=14.3999996185303px]
Symptom: Hard brick (can't on at all).
[size=14.3999996185303px]Once plugged in with battery removed, pc detects 2 drivers to be installed. Single USB driver, and VCOM. Then it keeps looping in connecting and disconnecting between Single USB driver and VCOM driver. Non-stop. Frequency: every 3~5 seconds.
[size=14.3999996185303px]Trying to flash. Only managed to get DA 100% red bar. After that I received error code 8406 from SP Flash Tools because of the disconnecting sound.
[size=14.3999996185303px]I use another computer. When I plugged in fresh to the new computer, the computer immediately tries to install 2 drivers again. And it will keep looping (i can hear the USB connecting and disconnecting sound) all the way.
[size=14.3999996185303px]Some precaution I took:
1. USB Deview. I used this to remove all mtk related drivers and try again.
[size=14.3999996185303px]2. Bcoz I'm using Windows 8.1 64-bit, I did use restart option F7 to disable drivers signature prior to installing MTK Drivers.
[size=14.3999996185303px]I used All MTK USB Driver 2014.....DPInst64.exe....
[size=14.3999996185303px]3. I ran all using administrater permission.4. I used all possible usb ports in my computer but to no avail.
[size=14.3999996185303px]I'm crying now =(
(12-10-2014, 10:29 PM)giftium Pls i need help.
I installed Hfont on my tecno P5 n it got bricked (i.e booting n stopping at tecno logo). I tried flashing,clearing/wipe data&cache, factory reset; still stucked at boot logo. I gave it 4 repair, d repairer worked it but i still bricked it again with hfont. Gave it to him again to repair but this time the phone went totally dead. Av tried using sp flash tool to format n flash the files(preloader,msr,esr1,uboot,bootimg,logo et al), but it is showing me Error 4032
Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail. Am using d correct scatter file(P5) downloaded frm dis site, Preloader.bin,uboot.bin,bootimg,esr et al still 4 p5 frm dis site. Evn wen trying to format only, it will in 1 sec reach 100% with red and after 1.51 secs will show Error 4032
Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail. Pls help, am using sp flash tool 3.18..... .
(18-10-2014, 08:08 PM)yuddie i tried using this tool to flash a preloader to my r7 and i get an error telling me that the preloader is too large and may cause region overlap.
when i still go further to flash the preloader. it simply stays at 0% no progress whatsoever.