Hovatek Forum MOBILE Android Tecno P5 hard bricked and not detected by SP Flash Tool
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Tecno P5 hard bricked and not detected by SP Flash Tool

Tecno P5 hard bricked and not detected by SP Flash Tool

Pages (4): Previous 1 2 3 4 Next
codedtee
codedtee
codedtee
Junior Member
28
26-10-2014, 08:09 AM
#11



(26-10-2014, 08:05 AM)hovatek
(26-10-2014, 07:50 AM)codedtee I mistakenly hard-bricked the second working P5 last night. I then successfully flashed the MTK backup I did somee minutes earlier and it worked.. Note that while flashing, it brought out the mobile phone's chip info at the bottom left corner of the SP tool. The tool saw the phone on a DA Com port.

I then tried to flash the dead phone with the same procedure and files but it didn't work. It didn't show the chip's info and still gave the error 4032. It saw the phone on MTK Com Port 17.

Am guessing the two phones might not necessarily be the same type even though they are both P5. This is because the dead P5 once got hard-bricked cos it was once flashed by the guys at Carlcare.

What's the next step please..? Thank you.

format the bricked p5 using sp flash tool. Do Not format Bootloader. just a normal format

Did that also overnight but gave me the same Error 4032
hovatek
hovatek
hovatek
Administrator
49,570
26-10-2014, 08:12 AM
#12
(26-10-2014, 08:09 AM)codedtee Did that also overnight but gave me the same Error 4032

what version of sp flash tool did you use?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
codedtee
codedtee
codedtee
Junior Member
28
26-10-2014, 08:14 AM
#13
(26-10-2014, 08:12 AM)hovatek
(26-10-2014, 08:09 AM)codedtee Did that also overnight but gave me the same Error 4032

what version of sp flash tool did you use?

5.1352.01
codedtee
codedtee
codedtee
Junior Member
28
26-10-2014, 08:17 AM
#14
The HINT is:

Please check your load matches to your target which is to be downloaded.
hovatek
hovatek
hovatek
Administrator
49,570
26-10-2014, 08:20 AM
#15



(26-10-2014, 08:14 AM)codedtee 5.1352.01

try version 3.13 after format. if it's still the same error then you'll need to get p5 new OS since you said it was flashed at carlcare

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
codedtee
codedtee
codedtee
Junior Member
28
26-10-2014, 08:21 AM
#16
(26-10-2014, 08:20 AM)hovatek
(26-10-2014, 08:14 AM)codedtee 5.1352.01

try version 3.13 after format. if it's still the same error then you'll need to get p5 new OS since you said it was flashed at carlcare

Am guessing something was changed at carlcare. How can I get the new OS?
hovatek
hovatek
hovatek
Administrator
49,570
26-10-2014, 08:28 AM
#17
(26-10-2014, 08:21 AM)codedtee Am guessing something was changed at carlcare. How can I get the new OS?

You'll need to keep scouting for other P5s. for M3, the difference between old OS and new OS lies in the background color of the app drawer and it's design (see pictures @ http://www.hovatek.com/forum/thread-311.html ). can't say for P5.

Hint: you can try flashing one file at a time. start with system.img (Android) . This should tell you which file exactly is incompatible.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
codedtee
codedtee
codedtee
Junior Member
28
26-10-2014, 08:30 AM
#18
(26-10-2014, 08:28 AM)hovatek
(26-10-2014, 08:21 AM)codedtee Am guessing something was changed at carlcare. How can I get the new OS?

You'll need to keep scouting for other P5s. for M3, the difference between old OS and new OS lies in the background color of the app drawer and it's design (see pictures @ http://www.hovatek.com/forum/thread-311.html ). can't say for P5.

Hint: you can try flashing one file at a time. start with system.img (Android) . This should tell you which file exactly is incompatible.


OK. thanks. Lemme start that now
codedtee
codedtee
codedtee
Junior Member
28
26-10-2014, 08:32 AM
#19
Or is there any chance that the scatter file am using won't work for the new OS?
hovatek
hovatek
hovatek
Administrator
49,570
26-10-2014, 09:18 AM
#20



(26-10-2014, 08:32 AM)codedtee Or is there any chance that the scatter file am using won't work for the new OS?

that's another possibility. they might have slightly different block addresses. try the current scatter file first

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (4): Previous 1 2 3 4 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram