My Tecno Phantom N9 wont power up
My Tecno Phantom N9 wont power up
samuelzio The working tab didnt come inspite leaving it to charge for 6 hours. When I connect the charger to the device, white border acround the screen shows and it would blink for like 5 times before stopping.
Also, in that state i successfully copid the boot.img, but when i tired doing the FAT, i got to 12% and sais S_FT_READFAIL or something le that.
What can i do from here.
Thanks
(07-11-2014, 09:52 AM)samuelzion What can i do from here.
Thanks
(07-11-2014, 11:34 AM)hovatek(07-11-2014, 09:52 AM)samuelzion What can i do from here.
Thanks
let's review what you have there
1. Bricked n9
2. Drained Working N9
3. MTK backup for n9 from our forum
4. SP Flash tool version 5
confirm you have all four
samuelzi 1. it only blinks when i connect to power source
2. I have all 4 items you listed
How do we proceed? tnx
(07-11-2014, 04:35 PM)hovateksamuelzi 1. it only blinks when i connect to power source
2. I have all 4 items you listed
How do we proceed? tnx
lets focus on the bricked one, disconnect the good one from power, we'll focus on it shortly
. for the bricked one, load the scatter file in sp flash tool v 5 and select format + download all. proceed with flashing to the bricked one
(08-11-2014, 08:03 AM)samuelzion Good morning. Pls can you just write out all u want me to do on the bricked one so that when i am online and u are not i can have access to them. Thanks
(08-11-2014, 08:12 AM)hovatek(08-11-2014, 08:03 AM)samuelzion Good morning. Pls can you just write out all u want me to do on the bricked one so that when i am online and u are not i can have access to them. Thanks
you're going to use the format option in version 5 before flashing files to it.
consider holding button combos before connecting to PC like
volume increase
volume decrease
power + volume up
power + volume down
(08-11-2014, 08:48 AM)samuelzion After which what next?
(08-11-2014, 08:48 AM)samuelzion After which what next?
hovatsamuelzion After which what next?
what's the state of the n9 that went dead after disconnecting from SP flash tool? someone's phone had the same issue after yours and he followed the guide@ http://www.hovatek.com/forum/thread-808.html , he's phone is back to life now