[Please help] Unisoc / Spreadtrum phone need help with CWM
[Please help] Unisoc / Spreadtrum phone need help with CWM
(04-01-2016, 09:29 AM)rishabh1x try going to /dev/block directory and check for a folder named by-name
if you find it then try using this command
ls -al /dev/block/[your path to by-name]
in my case it is
ls -al /dev/block/platform/sdio_mmc/by-name
It will list all your partition names with their corresponding blocks
(04-01-2016, 06:10 PM)Qiangong2 I don't have that folder
Update: When I put an SD card in, it calls the sdcard as mmcblk0. The zram0 partition is the only one that is on the physical device.
(05-01-2016, 10:30 AM)hovatek(04-01-2016, 06:10 PM)Qiangong2 I don't have that folder
Update: When I put an SD card in, it calls the sdcard as mmcblk0. The zram0 partition is the only one that is on the physical device.
Use the adb method @ https://www.hovatek.com/forum/thread-1405.html
(06-01-2016, 02:28 AM)Qiangong2 I used it and got a bunch of weird partitions that i've never seen before on Mediatek or Qualcomm phones.
I have sp1, 2ndb1, kpanic, and ubipac. I've attached the screenshot. What do I do now? Thanks by the way for helping
(06-01-2016, 01:20 PM)hovatek [quote='Qiangong2' pid='64774' dateline='1452043684']
I used it and got a bunch of weird partitions that i've never seen before on Mediatek or Qualcomm phones.
I have sp1, 2ndb1, kpanic, and ubipac. I've attached the screenshot. What do I do now? Thanks by the way for helping
Ok. Any luck finding the phone's firmware?
(06-01-2016, 05:33 PM)Qiangong2 No, my phone is the Blu dash jr 3g. Nothing on firmwarefile or anywhere else. Nothing on their support site either. I asked support for the firmware and they said very rudely that ota updates are the only way I could get firmware, and even then I wouldn't get a copy of the recovery. I would just get a partial system.img to flash.
(06-01-2016, 07:37 PM)hovatek(06-01-2016, 05:33 PM)Qiangong2 No, my phone is the Blu dash jr 3g. Nothing on firmwarefile or anywhere else. Nothing on their support site either. I asked support for the firmware and they said very rudely that ota updates are the only way I could get firmware, and even then I wouldn't get a copy of the recovery. I would just get a partial system.img to flash.
thats serious
(06-01-2016, 08:32 PM)Qiangong2 Yeah.
Could the firmware be the ubipac MTD partition? Or not? Also, what is the 2ndb1 partition for?
Sent from my SGH-M919 using Hovatek mobile
(07-01-2016, 01:23 PM)hovatek(06-01-2016, 08:32 PM)Qiangong2 Yeah.
Could the firmware be the ubipac MTD partition? Or not? Also, what is the 2ndb1 partition for?
Sent from my SGH-M919 using Hovatek mobile
Install ROM Toolbox lite on the phone
(08-01-2016, 01:45 AM)Qiangong2 I tried backing up using that, and it doesn't work. I really want CWM for my device, but I don't know what to do...