Hovatek Forum MOBILE Android [Please help] totally dead m3 not flashing
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] totally dead m3 not flashing

[Please help] totally dead m3 not flashing

Pages (2): 1 2 Next
jjonaivi
jjonaivi
jjonaivi
Junior Member
38
25-03-2016, 04:29 PM
#1



Error 4032 

Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail 
 
I got this msg wen I tried to flash my  bricked techno m3. I have followed all d possible solutions related to dt error as posted on this forum but no soln yet. sp flash identifies d device, it shows d red line on 100% wen I plug d USB& it starts reading until it gets to 37 or so den it shows d error msg. 

Initialy, wen I flashed it, it flashed successfully and showed Completed, but wen i try to switch on it only vibrates. Old helpoError 4032 

Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail 
 
I got this msg wen I tried to flash my  bricked techno m3. I have followed all d possible solutions related to dt error as posted on this forum but no soln yet. sp flash identifies d device, it shows d red line on 100% wen I plug d USB& it starts reading until it gets to 37 or so den it shows d error msg. 

Initialy, wen I flashed it, it flashed successfully and showed Completed, but wen i try to switch on it only vibrates. Pls help
hovatek
hovatek
hovatek
Administrator
49,570
25-03-2016, 06:32 PM
#2
(25-03-2016, 04:29 PM)jjonaivi Error 4032 

Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail 
 
I got this msg wen I tried to flash my  bricked techno m3. I have followed all d possible solutions related to dt error as posted on this forum but no soln yet. sp flash identifies d device, it shows d red line on 100% wen I plug d USB& it starts reading until it gets to 37 or so den it shows d error msg. 

Initialy, wen I flashed it, it flashed successfully and showed Completed, but wen i try to switch on it only vibrates. Old helpoError 4032 

Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail 
 
I got this msg wen I tried to flash my  bricked techno m3. I have followed all d possible solutions related to dt error as posted on this forum but no soln yet. sp flash identifies d device, it shows d red line on 100% wen I plug d USB& it starts reading until it gets to 37 or so den it shows d error msg. 

Initialy, wen I flashed it, it flashed successfully and showed Completed, but wen i try to switch on it only vibrates. Pls help

What version of Android was it running on before it got bricked?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
jjonaivi
jjonaivi
jjonaivi
Junior Member
38
25-03-2016, 08:25 PM
#3
Version 4.2.2
X3non
X3non
X3non
Recognized Contributor
22,062
25-03-2016, 11:36 PM
#4
(25-03-2016, 08:25 PM)jjonaivi Version 4.2.2

what was the color of the first tecno logo whenever you turn on the phone?
hovatek
hovatek
hovatek
Administrator
49,570
26-03-2016, 11:41 AM
#5



(25-03-2016, 08:25 PM)jjonaivi Version 4.2.2

was it the Blue or Black background type?
see the pics @ https://www.hovatek.com/forum/thread-311.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
jjonaivi
jjonaivi
jjonaivi
Junior Member
38
26-03-2016, 06:21 PM
#6
(26-03-2016, 11:41 AM)hovatek
(25-03-2016, 08:25 PM)jjonaivi Version 4.2.2

was it the Blue or Black background type?
see the pics @ https://www.hovatek.com/forum/thread-311.html

d blue sir. old version. I even did d backup b4 crashing, so I HV d backup of d ROM & I also HV downloaded d ROM on havatek self but no solution. even wen I tried formating, still d same error msg
hovatek
hovatek
hovatek
Administrator
49,570
26-03-2016, 10:39 PM
#7
(26-03-2016, 06:21 PM)jjonaivi d blue sir. old version. I even did d backup b4 crashing, so I HV d backup of d ROM & I also HV downloaded d ROM on havatek self but no solution. even wen I tried formating, still d same error msg

Have you tried the 4.2 New OS and 4.4 firmware?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
jjonaivi
jjonaivi
jjonaivi
Junior Member
38
28-03-2016, 09:10 AM
#8
(26-03-2016, 10:39 PM)hovatek
(26-03-2016, 06:21 PM)jjonaivi d blue sir. old version. I even did d backup b4 crashing, so I HV d backup of d ROM & I also HV downloaded d ROM on havatek self but no solution. even wen I tried formating, still d same error msg

Have you tried the 4.2 New OS and 4.4 firmware?

no sir
hovatek
hovatek
hovatek
Administrator
49,570
28-03-2016, 07:41 PM
#9
(28-03-2016, 09:10 AM)jjonaivi no sir

Ok, hope you didn't tick userdata and cache when flashing the Old OS. And hope you selected Download only

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
jjonaivi
jjonaivi
jjonaivi
Junior Member
38
28-03-2016, 09:25 PM
#10



(28-03-2016, 07:41 PM)hovatek
(28-03-2016, 09:10 AM)jjonaivi no sir

Ok, hope you didn't tick userdata and cache when flashing the Old OS. And hope you selected Download only

no, I didn't select user data & cache & I also click download only. dis what happened, d Phone use to switch on d data itself thus drain ba3. so I had to flash a new rom. at first, I formatted it. via spfllash den download d ROM, it showed d yellow progressive line & wrote completed, but to my surprise I tried to on it, but it only vibrates. Trying to flash it again, I keep seeing that error .it will show 100% & start counting b4 bringing up d error. I HV installed d vcom preloadeder manually, done almost everything, but still no solution. I still need help cos this not d first time I would flash a fone I HV not encountered such problem b4
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram