tecno h6 does not power on or detected by pc
tecno h6 does not power on or detected by pc
(22-04-2016, 04:14 PM)neyzo Hello hovatek,I have a tecno h6 that wont power on instead the camera light comes on and it is not detected by the computer,please help me.
(22-04-2016, 05:41 PM)hovatek(22-04-2016, 04:14 PM)neyzo Hello hovatek,I have a tecno h6 that wont power on instead the camera light comes on and it is not detected by the computer,please help me.
how did this start and have you tried doing a factory reset?
(23-04-2016, 01:22 AM)neyzo it just had a low battery,and it turnd off when it was connected to the charger the display turnd on it didn't show anything just a black screen and the camera light was on,I couldn't do a factory reset the phone dosnt boot up.
(23-04-2016, 01:56 PM)hovatekI tried to flash it with the sp flash file,but the phone is not detected by any software at all even when I installed the vcom drivers manually as the tutorial from your thread instructs(https://www.hovatek.com/forum/thread-440.html ).all the flashing files are ticked (sellected) except the CACHE & USERDATA which have the begin and end address without their location specified.I have also noticed that the display doesnot come on anymore but the flash light does when I remove and plug in the charger/USB cable in a couple of times(23-04-2016, 01:22 AM)neyzo it just had a low battery,and it turnd off when it was connected to the charger the display turnd on it didn't show anything just a black screen and the camera light was on,I couldn't do a factory reset the phone dosnt boot up.
now, i understand.
download the firmware @ https://www.hovatek.com/forum/thread-311.html and flash using Sp flash tool @ https://www.hovatek.com/forum/thread-159.html
(24-04-2016, 02:45 PM)neyzo I tried to flash it with the sp flash file,but the phone is not detected by any software at all even when I installed the vcom drivers manually as the tutorial from your thread instructs(https://www.hovatek.com/forum/thread-440.html ).all the flashing files are ticked (sellected) except the CACHE & USERDATA which have the begin and end address without their location specified.I have also noticed that the display doesnot come on anymore but the flash light does when I remove and plug in the charger/USB cable in a couple of times
(24-04-2016, 06:13 PM)hovatek(24-04-2016, 02:45 PM)neyzo I tried to flash it with the sp flash file,but the phone is not detected by any software at all even when I installed the vcom drivers manually as the tutorial from your thread instructs(https://www.hovatek.com/forum/thread-440.html ).all the flashing files are ticked (sellected) except the CACHE & USERDATA which have the begin and end address without their location specified.I have also noticed that the display doesnot come on anymore but the flash light does when I remove and plug in the charger/USB cable in a couple of times
does the PC make a sound when you connect the phone?
(24-04-2016, 02:45 PM)neyzo(23-04-2016, 01:56 PM)hovatekI tried to flash it with the sp flash file,but the phone is not detected by any software at all even when I installed the vcom drivers manually as the tutorial from your thread instructs(https://www.hovatek.com/forum/thread-440.html ).all the flashing files are ticked (sellected) except the CACHE & USERDATA which have the begin and end address without their location specified.I have also noticed that the display doesnot come on anymore but the flash light does when I remove and plug in the charger/USB cable in a couple of times(23-04-2016, 01:22 AM)neyzo it just had a low battery,and it turnd off when it was connected to the charger the display turnd on it didn't show anything just a black screen and the camera light was on,I couldn't do a factory reset the phone dosnt boot up.
now, i understand.
download the firmware @ https://www.hovatek.com/forum/thread-311.html and flash using Sp flash tool @ https://www.hovatek.com/forum/thread-159.html
(25-04-2016, 04:49 PM)neyzo The problem was the battery was flat,I charged it on another phone,tried againg to flash and it worked.the flashing process was complete but the problem was still there.and I have noticed it became very hot around the torch area though while flashing the torch was on