Hovatek Forum HARDWARE Repairs [Tutorial] HOW TO DETECT MEDIATEK PHONE FOR FLASHING WITH GOLD POINTS
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Tutorial] HOW TO DETECT MEDIATEK PHONE FOR FLASHING WITH GOLD POINTS

[Tutorial] HOW TO DETECT MEDIATEK PHONE FOR FLASHING WITH GOLD POINTS

Pages (2): 1 2 Next
droidmobitech
droidmobitech
droidmobitech
Senior Member
828
14-02-2016, 08:30 AM
#1



Hi this information is to guide users, finding it difficult to get preloader detection for flashing in Mediatek Device

Our Admin made it clear on shorting KCOLO to GND for Force Preloader Test point mode

REQUIREMENTS
*A USB CABLE
[Image: 2ueqrmg.jpg]

*B the Phone PCB
[Image: mt5yza.png]



In certain phone PCB; KCOLO or COLO will not be FOUND But rather points like DM and DP; this means
DM- data negative
DP- data positive

OR You will have also Rx and Tx on phone motherboard
Rx- Receiver
Tx- Transmitter

RX and Tx points on Phone PCB are Just like DP and DM
USES and Difference

DP and DM (D+/D-) are used for USB operations by shorting the usb cable DP and DM on the Phone PCB and then supplying a power obviously positive and negative to the power terminal of the motherboard. the phone will detect SUCCESSFULLY if everything goes right.

[Image: 2yn4hh0.jpg]

Rx and Tx are also used for COMP port operations no very suitable for newbie

You must have a gsm china box to perform this operation; besides this operation is not done because of the box cables and usb gid and clips.

BELOW IS A TECNO M7 BOARD; From the picture beneath the USB attachment to the phone motherboard are DP and DM

[Image: e7xqfp.jpg]

NB: Covered by some lead; but DM and DP are still showing clearly*****


I hope with this your Phone Detection wont be a problem with or without gsm box to flash

But remember you will need a DC power supply to power the motherboard power terminals for detection

Credit****
gsmghana
****

Thanks
This post was last modified: 09-06-2018, 12:32 PM by hovatek.
droidmobitech
droidmobitech
droidmobitech
Senior Member
828
20-02-2016, 04:53 PM
#2
Detection Sample-Rx TX and GND PINOUT FOR COM OPERATIONS

NB: THIS IS VERY SUITABLE FOR USERS WITH GSM BOX and NOT ORDINARY USB FLASHING


[Image: 16j4orm.jpg]


Sent from my INFINIX-X551 using Tapatalk
This post was last modified: 09-06-2018, 12:35 PM by hovatek.
erwun
erwun
erwun
Junior Member
22
24-04-2016, 03:43 AM
#3
I tried dm dp,but. The phone still usb device not recognized.
droidmobitech
droidmobitech
droidmobitech
Senior Member
828
24-04-2016, 09:43 AM
#4
(24-04-2016, 03:43 AM)erwun I tried dm dp,but. The phone still usb device not recognized.
Bro, D+ and D- detection works in best in android mtk and some spreadtrum,
If d+/- not working for you, use a Chinese box to set pinout , surely it will detect
erwun
erwun
erwun
Junior Member
22
25-04-2016, 04:23 AM
#5



Welcome to use Miracle Box
(World's First Fuzzy Logic Based Tool)
Update:16-01-09
Connected OK.
Fuzzy Logic Method is very safe and reliable !
Check Authentication...
Check the new version.
______________________________

Miracle Box Version 2.31
Release: 14th April 2016
______________________________
# NEW MTK Features Added.
# New SPD Features Added.
# New Fastboot Features Added.
# New GUI Features Added.
______________________________
(www.dealer.afalconbox.com)
Falcon Box Activation on Miracle Key
Available
__________[FACEBOOK]__________
http://facebook.com/amiracleteam
___________SUPPORT]___________
http://support.amiracleteam.com
______________________________
Info:
id:A516_ROW_S116_131016
version:4.2.2
model:Lenovo A516
brand:Lenovo
manufacturer:LENOVO
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Open Port Err:
*** the Port be occupied.
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM19)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6572 SW:0000 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0x0000000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
>>Not support Flash ID


what's the problem?
jermain47
jermain47
jermain47
Junior Member
23
08-09-2016, 03:50 AM
#6
(25-04-2016, 04:23 AM)erwun Welcome to use Miracle Box
(World's First Fuzzy Logic Based Tool)
Update:16-01-09
Connected OK.
Fuzzy Logic Method is very safe and reliable !
Check Authentication...
Check the new version.
______________________________

Miracle Box Version 2.31
Release: 14th April 2016
______________________________
# NEW MTK Features Added.
# New SPD Features Added.
# New Fastboot Features Added.
# New GUI Features Added.
______________________________
(www.dealer.afalconbox.com)
Falcon Box Activation on Miracle Key
Available
__________[FACEBOOK]__________
http://facebook.com/amiracleteam
___________SUPPORT]___________
http://support.amiracleteam.com
______________________________
Info:
id:A516_ROW_S116_131016
version:4.2.2
model:Lenovo A516
brand:Lenovo
manufacturer:LENOVO
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Open Port Err:
*** the Port be occupied.
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM19)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6572 SW:0000 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0x0000000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
>>Not support Flash ID


what's the problem?

It means Miracle Box does not support that particular phone or the firmware on it.
Lina2602
Lina2602
Lina2602
Junior Member
18
06-11-2016, 06:29 PM
#7
(08-09-2016, 03:50 AM)jermain47
(25-04-2016, 04:23 AM)erwun Welcome to use Miracle Box
(World's First Fuzzy Logic Based Tool)
Update:16-01-09
Connected OK.
Fuzzy Logic Method is very safe and reliable !
Check Authentication...
Check the new version.
______________________________

Miracle Box Version 2.31
Release: 14th April 2016
______________________________
# NEW MTK Features Added.
# New SPD Features Added.
# New Fastboot Features Added.
# New GUI Features Added.
______________________________
(www.dealer.afalconbox.com)
Falcon Box Activation on Miracle Key
Available
__________[FACEBOOK]__________
http://facebook.com/amiracleteam
___________SUPPORT]___________
http://support.amiracleteam.com
______________________________
Info:
id:A516_ROW_S116_131016
version:4.2.2
model:Lenovo A516
brand:Lenovo
manufacturer:LENOVO
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Open Port Err:
*** the Port be occupied.
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM19)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6572 SW:0000 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0x0000000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
>>Not support Flash ID


what's the problem?

It means Miracle Box does not support that particular phone or the firmware on it.
droidmobitech
droidmobitech
droidmobitech
Senior Member
828
06-11-2016, 09:27 PM
#8
(06-11-2016, 06:29 PM)Lina2602
(08-09-2016, 03:50 AM)jermain47
(25-04-2016, 04:23 AM)erwun Welcome to use Miracle Box
(World's First Fuzzy Logic Based Tool)
Update:16-01-09
Connected OK.
Fuzzy Logic Method is very safe and reliable !
Check Authentication...
Check the new version.
______________________________

Miracle Box Version 2.31
Release: 14th April 2016
______________________________
# NEW MTK Features Added.
# New SPD Features Added.
# New Fastboot Features Added.
# New GUI Features Added.
______________________________
(www.dealer.afalconbox.com)
Falcon Box Activation on Miracle Key
Available
__________[FACEBOOK]__________
http://facebook.com/amiracleteam
___________SUPPORT]___________
http://support.amiracleteam.com
______________________________
Info:
id:A516_ROW_S116_131016
version:4.2.2
model:Lenovo A516
brand:Lenovo
manufacturer:LENOVO
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Open Port Err:
*** the Port be occupied.
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM19)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6572 SW:0000 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0x0000000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
>>Not support Flash ID


what's the problem?

It means Miracle Box does not support that particular phone or the firmware on it.
1. Not supported in that version of the box
Or

2. Change boot and try again
vikaskaryani
vikaskaryani
vikaskaryani
Newbie
2
02-04-2017, 04:53 PM
#9
(20-02-2016, 04:53 PM)droidmobitech Detection Sample-Rx TX and GND PINOUT FOR COM OPERATIONS

NB: THIS IS VERY SUITABLE FOR USERS WITH GSM BOX and NOT ORDINARY USB FLASHING


Sent from my INFINIX-X551 using Tapatalk
This post was last modified: 09-06-2018, 12:34 PM by hovatek.
vikaskaryani
vikaskaryani
vikaskaryani
Newbie
2
02-04-2017, 04:54 PM
#10



(06-11-2016, 09:27 PM)droidmobitech
(06-11-2016, 06:29 PM)Lina2602
(08-09-2016, 03:50 AM)jermain47
(25-04-2016, 04:23 AM)erwun Welcome to use Miracle Box
(World's First Fuzzy Logic Based Tool)
Update:16-01-09
Connected OK.
Fuzzy Logic Method is very safe and reliable !
Check Authentication...
Check the new version.
______________________________

Miracle Box Version 2.31
Release: 14th April 2016
______________________________
# NEW MTK Features Added.
# New SPD Features Added.
# New Fastboot Features Added.
# New GUI Features Added.
______________________________
(www.dealer.afalconbox.com)
Falcon Box Activation on Miracle Key
Available
__________[FACEBOOK]__________
http://facebook.com/amiracleteam
___________SUPPORT]___________
http://support.amiracleteam.com
______________________________
Info:
id:A516_ROW_S116_131016
version:4.2.2
model:Lenovo A516
brand:Lenovo
manufacturer:LENOVO
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Open Port Err:
*** the Port be occupied.
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM19)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6572 SW:0000 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0x0000000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
>>Not support Flash ID


what's the problem?

It means Miracle Box does not support that particular phone or the firmware on it.
1. Not supported in that version of the box
Or

2. Change boot and try again
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram