Hovatek Forum MOBILE Android MIJUE T200 - root and resize problem
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


MIJUE T200 - root and resize problem

MIJUE T200 - root and resize problem

Petmar
Petmar
Petmar
Junior Member
18
13-05-2016, 10:12 AM
#1



Please, please help me!
I have MIJUE T200, MTK 6735, 5.1 lolipop, and irritating problem with the lack of space on the system partiton (only 2GB, the rest up to 16GB is "unusable"). My desire is to root phone and resize partitions to say 8 + 4GB.
I immediately note You that I carefully read the following threads:
https://www.hovatek.com/forum/thread-526.html
https://www.hovatek.com/forum/thread-11872.html
https://www.hovatek.com/forum/thread-11838.html
All things I tried were with open developer options, allow the bootloader to be unlocked and USB debugging. Also all aplications I run as administrator.
My problems are:
When I install MTK & Vcom Drivers (any and/or all of them), in the device manager I get a message with a yellow triangle, and after installing each driver, it says the driver could not start (error code 10). For installation drivers, I allowed on my WINDOWS7/32bit install them when asked about it. I read that this is a common appearance, but the problem become when I tried to create a scatter file from my phone with MTK Droid tools v2.5.3. It could not recognize/read my phone (information). I tried with the recommended PdaNetA4190.exe drivers, same problem. Also, I could not download MTK Droid Tools v2.5.3d, because something is wrong with the link. Could You give me new/working one to try with it?
In fact, I think it's important to make bkp of my original scatter file, and after that bkp (read back) of my original ROM before flashing phone with "TWRP for Mijue T200 ported by Team Hovatek". I afraid of "bricking" phone, so I would like to have possibility of return to my original image.
Do You think maybe I should just try to flash phone with recovery.img from "TWRP for Mijue T200 ported by Team Hovatek", in combination with the scatter file from swimmer3000 (MT6735_Android_scatter_T200_2.txt)? Would it fully fit to my phone? Would it be wise to do it without bkp of my original scatter and ROM?
I was thinking about readback my ROM using SP flash tool, but I do not have my scatter file. Could I use scatter from swimmer3000 and make bkp of my ROM with it? If so, what to write for a start address and length (in hex)? What to write for bkp entire ROM (ROM_1) if I want to bkp it too? Would it fully fit to my phone?
Finaly: I could not make my own scatter file and bkp my ROM, I'm not entirely sure of the drivers, but do not dare to make a flash without bkp.
Lot of questions, I know ... but PLEASE tell me the easiest way to root and resize my phone partition, because that lack of space is already terrifying.
So, PLEASE give me a hand in way step-by-step instructions and I will certainly appreciate it.
Any help would be great, and if You need any additional info about phone or something else, please just ask.
Tnx in advance for Your efforts.
X3non
X3non
X3non
Recognized Contributor
22,062
13-05-2016, 12:30 PM
#2
(13-05-2016, 10:12 AM)Petmar ...
Tnx in advance for Your efforts.

* i believe you've successfully rooted the phone using kingroot. if so then you dont need to flash supersu in twrp.
* if you havent then see https://www.hovatek.com/forum/thread-11872.html
* after successfully flashing twrp.. you can make a twrp backup before trying any other thing.
* for resizing partition check the guide @ http://forum.xda-developers.com/general/...l-t3180978
This post was last modified: 13-05-2016, 12:33 PM by X3non.
Petmar
Petmar
Petmar
Junior Member
18
13-05-2016, 01:06 PM
#3
First tnx for Your help. I rooted the phone using latest kingroot, but only in "software" way. It meens that kingroot is able to give permisions to some apps, but I could not enter in recovery mode (VOL+ and POWER) because I get laying down android icon says "no command". All apps that I know, I tried to resize in way to install them in the system (booted android), kingroot gave them permissions, but they say "I need custom image, TWRP"...etc. So it isn't rooted for real, I couldn't resize with Resize_v23-signed.zip for example.
I saw https://www.hovatek.com/forum/thread-11872.html , but I wanted to make bkp of my own scatter and ROM image BEFORE do flashing twrp. Reason for that is that I'm afraid to flash while do not have any bkp of my original BEFORE flashing. Also, don't know if I should use recovery.img from "TWRP for Mijue T200 ported by Team Hovatek" in combination with scatter file from swimmer for flashing.
Would it fully fit to my MIJUE T200?
Do You think it is safe to flashing that way?
After eventualy successfully flashing, I understand the way how to use SuperSU and Resize_v23-signed.zip in recovery mode. But as I said now I couldn't reach that, because after choosing that mode, I only got "half dead" laying android icon with no command".
What exactly to do now?
hovatek
hovatek
hovatek
Administrator
49,570
22-05-2016, 07:55 AM
#4
(13-05-2016, 01:06 PM)Petmar First tnx for Your help. I rooted the phone using latest kingroot, but only in "software" way. It meens that kingroot is able to give permisions to some apps, but I could not enter in recovery mode (VOL+ and POWER) because I get laying down android icon says "no command". All apps that I know, I tried to resize in way to install them in the system (booted android), kingroot gave them permissions, but they say "I need custom image, TWRP"...etc. So it isn't rooted for real, I couldn't resize with Resize_v23-signed.zip for example.
I saw https://www.hovatek.com/forum/thread-11872.html , but I wanted to make bkp of my own scatter and ROM image BEFORE do flashing twrp. Reason for that is that I'm afraid to flash while do not have any bkp of my original BEFORE flashing. Also, don't know if I should use recovery.img from "TWRP for Mijue T200 ported by Team Hovatek" in combination with scatter file from swimmer for flashing.
Would it fully fit to my MIJUE T200?
Do You think it is safe to flashing that way?
After eventualy successfully flashing, I understand the way how to use SuperSU and Resize_v23-signed.zip in recovery mode. But as I said now I couldn't reach that, because after choosing that mode, I only got "half dead" laying android icon with no command".
What exactly to do now?

what you have there is stock recovery, you need a custom recovery. the TWRP recovery image we ported works. the thread @ https://www.hovatek.com/forum/thread-11838.html is proof

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Petmar
Petmar
Petmar
Junior Member
18
23-05-2016, 11:30 AM
#5



what you have there is stock recovery, you need a custom recovery. the TWRP recovery image we ported works. the thread @ https://www.hovatek.com/forum/thread-11838.html is proof.

OK, I already solved the problem. Trick was about installing drivers. Other did just like Hovatek and Swimmer told. Txn both.
Best regards.
toreRZR
toreRZR
toreRZR
Enthusiastic Member
10
10-06-2016, 02:13 PM
#6
Hi Hovatek, please, can anyone help me with an back-up/stock rom for Mijue T200? I don't have a back-up and now I am in bootloop. Please, I don't care if it's stock or modified, I just want to work.

Trimis de la 351D folosind Hovatek mobile
hovatek
hovatek
hovatek
Administrator
49,570
11-06-2016, 01:11 PM
#7
(10-06-2016, 02:13 PM)toreRZR Hi Hovatek, please, can anyone help me with an back-up/stock rom for Mijue T200? I don't have a back-up and now I am in bootloop. Please, I don't care if it's stock or modified, I just want to work.

Trimis de la 351D folosind Hovatek mobile

ask @ https://www.hovatek.com/forum/thread-11838.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
toreRZR
toreRZR
toreRZR
Enthusiastic Member
10
11-06-2016, 03:45 PM
#8
(11-06-2016, 01:11 PM)hovatek
(10-06-2016, 02:13 PM)toreRZR Hi Hovatek, please, can anyone help me with an back-up/stock rom for Mijue T200? I don't have a back-up and now I am in bootloop. Please, I don't care if it's stock or modified, I just want to work.

Trimis de la 351D folosind Hovatek mobile

ask @ https://www.hovatek.com/forum/thread-11838.html

Already did, still waiting Sad
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram