Hovatek Forum MOBILE Android infinix zero 1 ( x506 ) no responce after charging problems
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


infinix zero 1 ( x506 ) no responce after charging problems

infinix zero 1 ( x506 ) no responce after charging problems

Pages (4): Previous 1 2 3 4 Next
matybazz
matybazz
matybazz
Senior Member
2,289
16-05-2016, 06:16 PM
#11



(16-05-2016, 05:49 PM)ficu24 okay I unplug it from the board but the battery ends with wires and it ends with white plastic casing that is small for the multimeter probe ( test pins )

Would have been better to take it to a hardware store.. But then in the plastic part you should notice red and black wire asin positive and nagative thats the points you should use to either boost or check the battery
ficu24
ficu24
ficu24
Junior Member
31
17-05-2016, 12:00 AM
#12
okay the battery is empty
I put the board on charging
I measured the D+ & vsub and I had a charge of .5A and 5v
but when measured the battery socket on the board I found no charge
matybazz
matybazz
matybazz
Senior Member
2,289
17-05-2016, 08:44 PM
#13
(17-05-2016, 12:00 AM)ficu24 okay the battery is empty
I put the board on charging
I measured the D+ & vsub and I had a charge of .5A and 5v
but when measured the battery socket on the board I found no charge

I guess problem half solved then
ficu24
ficu24
ficu24
Junior Member
31
18-05-2016, 03:30 PM
#14
how to solve the problem >> the board is not charging the battery
but why it's not identified by combuter
matybazz
matybazz
matybazz
Senior Member
2,289
18-05-2016, 03:50 PM
#15



(18-05-2016, 03:30 PM)ficu24 how to solve the problem >> the board is not charging the battery
but why it's not identified by combuter

You will have to boost the battery manually first when the phone boots then you can charge it
ficu24
ficu24
ficu24
Junior Member
31
18-05-2016, 04:29 PM
#16
how to do that ?
thanks
matybazz
matybazz
matybazz
Senior Member
2,289
18-05-2016, 06:13 PM
#17
(18-05-2016, 04:29 PM)ficu24 how to do that ?
thanks

You will need a changer that doesnt have a usb plug positive to postive and negative to negative it must be a charger not a normall electric connection...
Or just take it to a hardware storr let them do it for you it safer that way for you
ficu24
ficu24
ficu24
Junior Member
31
18-05-2016, 08:50 PM
#18
can I use a charging cable and solder the wires to the battery
matybazz
matybazz
matybazz
Senior Member
2,289
19-05-2016, 06:32 PM
#19
(18-05-2016, 08:50 PM)ficu24 can I use a charging cable and solder the wires to the battery

Yes but do not solder just join and a walll socket charger will be faster
hovatek
hovatek
hovatek
Administrator
49,570
24-05-2016, 08:22 AM
#20



(18-05-2016, 03:30 PM)ficu24 how to solve the problem >> the board is not charging the battery
but why it's not identified by combuter

I've had a similar issue on an Infinix X506.
does the board show any lights when you connect to power without a battery inside?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (4): Previous 1 2 3 4 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram