Hovatek
  • Need instant replies? Try Private Support
  • Blog
  • Home
Login Register Ask Question Hello There, Guest!


  1. Hovatek Forum
  2. MOBILE PHONES HELP SECTION
  3. Android
Pages (8): « Previous 1 2 3 4 5 … 8 Next »
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5



[Please help] TECNO R7 INTERNAL SD CARD DAMAGED

Kingsident
Kingsident
Techie Member
**
Posts: 56
Threads: 2
Joined: Apr 2015
Reputation: 0
#11

06-05-2016, 06:24 AM

I just noticed the phone is warm whole there is battery in

Find
Reply
X
Thanks to Kingsident



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


mensa
mensa
Senior Member
*****
Posts: 558
Threads: 8
Joined: Apr 2016
Reputation: 0
#12

06-05-2016, 09:32 AM
(06-05-2016, 06:16 AM)Kingsident Wrote:  
(06-03-2016, 06:20 PM)mensa Wrote:  
(06-03-2016, 03:07 PM)Kingsident Wrote:  
(06-03-2016, 09:36 AM)mensa Wrote:  You try flashing but format before flash.format the sdcard with ext4 filesystem

I should format the phone first, then flash?
Then format the memory card using ext4 filesystem
Get a ROM designed for your phone. Then try flashing your phone but you should format the phone first before you flash.
NB: when you click on the format tab to format the phone, make sure you don't change anything; ie) setting there. Settings should be "Auto format flash" and " format whole flash except bootloader".leave it as it is and click on start. You must press and hold down the volume up key while connecting your phone for easy detection by sp flash tool. When flashing is complete, disconnect the phone and go back to download tab, click on the download and connect your phone following the same pattern.

I did as advised , i formatted before flash but while flashing it skips over to around 75% , continues like that till 100 % then the green tick comes up. When I disconnect the battery wait for sometime before slotting it back then on it, nothing happens, the phone doesn't respond, I try booting into recovery mode but nothing just unresponsive like I'm not doing anything.

Was there something I did wrong,please help me

Where did you get the ROM and how many files were in the ROM?

Sent from my Infinix-X600 using Hovatek mobile
Find
Reply
X
Thanks to mensa



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


Kingsident
Kingsident
Techie Member
**
Posts: 56
Threads: 2
Joined: Apr 2015
Reputation: 0
#13

06-05-2016, 09:46 AM
(06-05-2016, 09:32 AM)mensa Wrote:  
(06-05-2016, 06:16 AM)Kingsident Wrote:  
(06-03-2016, 06:20 PM)mensa Wrote:  
(06-03-2016, 03:07 PM)Kingsident Wrote:  
(06-03-2016, 09:36 AM)mensa Wrote:  You try flashing but format before flash.format the sdcard with ext4 filesystem

I should format the phone first, then flash?
Then format the memory card using ext4 filesystem
Get a ROM designed for your phone. Then try flashing your phone but you should format the phone first before you flash.
NB: when you click on the format tab to format the phone, make sure you don't change anything; ie) setting there. Settings should be "Auto format flash" and " format whole flash except bootloader".leave it as it is and click on start. You must press and hold down the volume up key while connecting your phone for easy detection by sp flash tool. When flashing is complete, disconnect the phone and go back to download tab, click on the download and connect your phone following the same pattern.

I did as advised , i formatted before flash but while flashing it skips over to around 75% , continues like that till 100 % then the green tick comes up. When I disconnect the battery wait for sometime before slotting it back then on it, nothing happens, the phone doesn't respond, I try booting into recovery mode but nothing just unresponsive like I'm not doing anything.

Was there something I did wrong,please help me

Where did you get the ROM and how many files were in the ROM?

Sent from my Infinix-X600 using Hovatek mobile

I got it from here , it has been in my memory card for a while now, a month to be precise. I thought if something was wrong with it it would not extract at all? By the way all the files except user data and cache were in the rom
Find
Reply
X
Thanks to Kingsident



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


mensa
mensa
Senior Member
*****
Posts: 558
Threads: 8
Joined: Apr 2016
Reputation: 0
#14

06-05-2016, 09:56 AM
(06-05-2016, 09:46 AM)Kingsident Wrote:  
(06-05-2016, 09:32 AM)mensa Wrote:  
(06-05-2016, 06:16 AM)Kingsident Wrote:  
(06-03-2016, 06:20 PM)mensa Wrote:  
(06-03-2016, 03:07 PM)Kingsident Wrote:  I should format the phone first, then flash?
Then format the memory card using ext4 filesystem
Get a ROM designed for your phone. Then try flashing your phone but you should format the phone first before you flash.
NB: when you click on the format tab to format the phone, make sure you don't change anything; ie) setting there. Settings should be "Auto format flash" and " format whole flash except bootloader".leave it as it is and click on start. You must press and hold down the volume up key while connecting your phone for easy detection by sp flash tool. When flashing is complete, disconnect the phone and go back to download tab, click on the download and connect your phone following the same pattern.

I did as advised , i formatted before flash but while flashing it skips over to around 75% , continues like that till 100 % then the green tick comes up. When I disconnect the battery wait for sometime before slotting it back then on it, nothing happens, the phone doesn't respond, I try booting into recovery mode but nothing just unresponsive like I'm not doing anything.

Was there something I did wrong,please help me

Where did you get the ROM and how many files were in the ROM?

Sent from my Infinix-X600 using Hovatek mobile

I got it from here , it has been in my memory card for a while now, a month to be precise. I thought if something was wrong with it it would not extract at all? By the way all the files except user data and cache were in the rom

It could be from the ROM. It couldn't have skipped to 75% just like that. It should be gradual; partition after partition. Have you compare sizes: that of the files in your ROM to the original? You can as well try downloading the same ROM but from a different source. You can also flash Uboot and preloader alone to see.

It could as well be the battery so check to see if the battery is not totally dead

Sent from my Infinix-X600 using Hovatek mobile
(This post was last modified: 06-05-2016, 09:57 AM by mensa. )
Find
Reply
X
Thanks to mensa



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


Kingsident
Kingsident
Techie Member
**
Posts: 56
Threads: 2
Joined: Apr 2015
Reputation: 0
#15

06-05-2016, 01:15 PM
(06-05-2016, 09:56 AM)mensa Wrote:  
(06-05-2016, 09:46 AM)Kingsident Wrote:  
(06-05-2016, 09:32 AM)mensa Wrote:  
(06-05-2016, 06:16 AM)Kingsident Wrote:  
(06-03-2016, 06:20 PM)mensa Wrote:  Get a ROM designed for your phone. Then try flashing your phone but you should format the phone first before you flash.
NB: when you click on the format tab to format the phone, make sure you don't change anything; ie) setting there. Settings should be "Auto format flash" and " format whole flash except bootloader".leave it as it is and click on start. You must press and hold down the volume up key while connecting your phone for easy detection by sp flash tool. When flashing is complete, disconnect the phone and go back to download tab, click on the download and connect your phone following the same pattern.

I did as advised , i formatted before flash but while flashing it skips over to around 75% , continues like that tillj 100 % then the green tick comes up. When I disconnect the battery wait for sometime before slotting it back then on it, nothing happens, the phone doesn't respond, I try booting into recovery mode but nothing just unresponsive like I'm not doing anything.

Was there something I did wrong,please help me

Where did you get the ROM and how many files were in the ROM?

Sent from my Infinix-X600 using Hovatek mobile

I got it from here , it has been in my memory card for a while now, a month to be precise. I thought if something was wrong with it it would not extract at all? By the way all the files except user data and cache were in the rom

It could be from the ROM. It couldn't have skipped to 75% just like that. It should be gradual; partition after partition. Have you compare sizes: that of the files in your ROM to the original? You can as well try downloading the same ROM but from a different source. You can also flash Uboot and preloader alone to see.

It could as well be the battery so check to see if the battery is not totally dead

Sent from my Infinix-X600 using Hovatek mobile

I'll try to get another ROM, it's not the first time I'm flashing with the ROM from here, it always works.
My two batteries are charged, whenever I press power button to switch on the phone, the phone gets warm.
Find
Reply
X
Thanks to Kingsident



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


mensa
mensa
Senior Member
*****
Posts: 558
Threads: 8
Joined: Apr 2016
Reputation: 0
#16

06-05-2016, 02:15 PM
(06-05-2016, 01:15 PM)Kingsident Wrote:  
(06-05-2016, 09:56 AM)mensa Wrote:  
(06-05-2016, 09:46 AM)Kingsident Wrote:  
(06-05-2016, 09:32 AM)mensa Wrote:  
(06-05-2016, 06:16 AM)Kingsident Wrote:  I did as advised , i formatted before flash but while flashing it skips over to around 75% , continues like that tillj 100 % then the green tick comes up. When I disconnect the battery wait for sometime before slotting it back then on it, nothing happens, the phone doesn't respond, I try booting into recovery mode but nothing just unresponsive like I'm not doing anything.

Was there something I did wrong,please help me

Where did you get the ROM and how many files were in the ROM?

Sent from my Infinix-X600 using Hovatek mobile

I got it from here , it has been in my memory card for a while now, a month to be precise. I thought if something was wrong with it it would not extract at all? By the way all the files except user data and cache were in the rom

It could be from the ROM. It couldn't have skipped to 75% just like that. It should be gradual; partition after partition. Have you compare sizes: that of the files in your ROM to the original? You can as well try downloading the same ROM but from a different source. You can also flash Uboot and preloader alone to see.

It could as well be the battery so check to see if the battery is not totally dead

Sent from my Infinix-X600 using Hovatek mobile

I'll try to get another ROM, it's not the first time I'm flashing with the ROM from here,  it always works.
My two batteries are charged, whenever I press power button to switch on the phone, the phone gets warm.
When you downloaded that ROM, have you been able to flash before; If yes, did it ever skip to 75% and then continue steadily to 100%? 

When you try to power on the phone, does it vibrate?
Find
Reply
X
Thanks to mensa



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


Kingsident
Kingsident
Techie Member
**
Posts: 56
Threads: 2
Joined: Apr 2015
Reputation: 0
#17

06-05-2016, 05:01 PM
(06-05-2016, 02:15 PM)mensa Wrote:  
(06-05-2016, 01:15 PM)Kingsident Wrote:  
(06-05-2016, 09:56 AM)mensa Wrote:  
(06-05-2016, 09:46 AM)Kingsident Wrote:  
(06-05-2016, 09:32 AM)mensa Wrote:  Where did you get the ROM and how many files were in the ROM?

Sent from my Infinix-X600 using Hovatek mobile

I got it from here , it has been in my memory card for a while now, a month to be precise. I thought if something was wrong with it it would not extract at all? By the way all the files except user data and cache were in the rom

It could be from the ROM. It couldn't have skipped to 75% just like that. It should be gradual; partition after partition. Have you compare sizes: that of the files in your ROM to the original? You can as well try downloading the same ROM but from a different source. You can also flash Uboot and preloader alone to see.

It could as well be the battery so check to see if the battery is not totally dead

Sent from my Infinix-X600 using Hovatek mobile

I'll try to get another ROM, it's not the first time I'm flashing with the ROM from here,  it always works.
My two batteries are charged, whenever I press power button to switch on the phone, the phone gets warm.
When you downloaded that ROM, have you been able to flash before; If yes, did it ever skip to 75% and then continue steadily to 100%? 

When you try to power on the phone, does it vibrate?

Nope it has never skipped like this before , and no the phone didn't vibrate, just a little warm
Find
Reply
X
Thanks to Kingsident



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


mensa
mensa
Senior Member
*****
Posts: 558
Threads: 8
Joined: Apr 2016
Reputation: 0
#18

06-05-2016, 05:56 PM
(06-05-2016, 05:01 PM)Kingsident Wrote:  
(06-05-2016, 02:15 PM)mensa Wrote:  
(06-05-2016, 01:15 PM)Kingsident Wrote:  
(06-05-2016, 09:56 AM)mensa Wrote:  
(06-05-2016, 09:46 AM)Kingsident Wrote:  I got it from here , it has been in my memory card for a while now, a month to be precise. I thought if something was wrong with it it would not extract at all? By the way all the files except user data and cache were in the rom

It could be from the ROM. It couldn't have skipped to 75% just like that. It should be gradual; partition after partition. Have you compare sizes: that of the files in your ROM to the original? You can as well try downloading the same ROM but from a different source. You can also flash Uboot and preloader alone to see.

It could as well be the battery so check to see if the battery is not totally dead

Sent from my Infinix-X600 using Hovatek mobile

I'll try to get another ROM, it's not the first time I'm flashing with the ROM from here,  it always works.
My two batteries are charged, whenever I press power button to switch on the phone, the phone gets warm.
When you downloaded that ROM, have you been able to flash before; If yes, did it ever skip to 75% and then continue steadily to 100%? 

When you try to power on the phone, does it vibrate?

Nope it has never skipped like this before , and no the phone didn't vibrate, just a little warm

Then download the ROM again and try to reflash. Maybe from a different source or here.

Sent from my Infinix-X600 using Hovatek mobile
Find
Reply
X
Thanks to mensa



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


X3non
X3non
Hovatek Representative
Posts: 12,904
Threads: 467
Joined: Jul 2014
Reputation: 257
#19

06-06-2016, 01:26 AM
(06-05-2016, 06:24 AM)Kingsident Wrote:  I just noticed the phone is warm whole there is battery in

try reflashing stock rom
* format first (all except bootloader) then download

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Find
Reply
X
Thanks to X3non



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


hovatek
hovatek
Administrator
*******
Posts: 45,552
Threads: 1,148
Joined: Oct 2013
Reputation: 397
#20

06-06-2016, 05:55 PM
Redownload the ROM @ https://forum.hovatek.com/thread-311.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.


Website Find
Reply
X
Thanks to hovatek



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


« Next Oldest | Next Newest »


Pages (8): « Previous 1 2 3 4 5 … 8 Next »






Possibly Related Threads…
Thread / Author Replies Views Last Post
Tecno C9 Info read... Erased/damaged phone?
ahmadmofadal
9
912
Last Post by X3non
04-17-2019, 10:38 AM
j400f efs damaged
harry4045
8
1,304
Last Post by EMMANUS
11-11-2018, 04:57 PM
Damaged EMMC flash
User65
1
553
Last Post by X3non
07-05-2018, 12:00 AM
Converting SD card to Internal memory on Hot4lite.
Tundun
1
528
Last Post by freshtyt
04-03-2018, 04:57 PM
Phone showing damaged SD card
Haryormidey
6
1,756
Last Post by hovatek
09-18-2017, 10:40 AM
How to fix phone storage damaged
deyoungtaleny
8
2,429
Last Post by hovatek
05-23-2017, 10:41 AM
Issue with my tecno H7 "The SD Card or the internal is destroyed try reformatting"
chumachisom
4
1,970
Last Post by hovatek
04-27-2017, 09:03 AM
Tecno G9 usb storage damaged
4jean
7
2,086
Last Post by jasson0324
04-11-2017, 03:27 PM
TECNO W3 PRELOADER DAMAGED
Tjaytony
5
4,187
Last Post by hovatek
03-15-2017, 09:56 AM
Help!!! USB Damaged
Jaymash
1
758
Last Post by hovatek
02-08-2017, 07:05 PM

  • View a Printable Version


Users browsing this thread: 1 Guest(s)
  1. Hovatek Forum
  2. MOBILE PHONES HELP SECTION
  3. Android

About

The Hovatek Forum is a free Tech. Support Forum. We provide solutions to all your device related problems and questions. We'll love to have you participate in discussions here whether you're a Newbie or Experienced.

         

Forum Team

Powered By MyBB. Crafted by EreeCorp.
Linear Mode
Threaded Mode