[Error Codes] List of sp flash tool error codes, meanings & how to fix (solution)
[Error Codes] List of sp flash tool error codes, meanings & how to fix (solution)
(18-06-2016, 01:33 AM)Odanaids Im Currently getting error [ brom error:?? (0x3) ]
i select all the bin files to download and it starts boot loader download and after 15 seconds all together i receive this error...
i had to pay 3$ for the firmware link as it was no where to be find for vodacom power tab 10 also known as alcatel pixi 3 (10") and i have a feeling there is something wrong with the scatterfile.
now the problem is that my phone is formatted from SPFT and cant even get into recovery.
here is the scatterfile any help would be deeply appreciated
(18-06-2016, 01:33 AM)Odanaids Im Currently getting error [ brom error:?? (0x3) ]
i select all the bin files to download and it starts boot loader download and after 15 seconds all together i receive this error...
i had to pay 3$ for the firmware link as it was no where to be find for vodacom power tab 10 also known as alcatel pixi 3 (10") and i have a feeling there is something wrong with the scatterfile.
now the problem is that my phone is formatted from SPFT and cant even get into recovery.
here is the scatterfile any help would be deeply appreciated
(22-07-2016, 04:05 PM)bodi25 hi guys
i have a tablet lenovo a3500 hv
it's broken and when i try to flash it
it stucks on 20%
pls if you have any solution just tell me
cuz i need alot
(13-08-2014, 08:36 AM)TheKalenGi(12-08-2014, 02:59 PM)hovatek clear cache and try again
The link worked this time, thanks!
(24-07-2016, 08:14 AM)bodi25 hi guys
i have lenovo a3500hv and it's broke now
and when i flash it it stucks at 20% it download just 320Mb from the firmware
if you have any solution pls tell me
(27-08-2016, 02:08 PM)AjTheKid Hello, I have a problem with sp flash tools. I press download, red bar shows, then purple, then yellow when the bar is yellow it stops at 26%. And it shows this error "BROM ERROR: S_FT_DOWNLOAD_FAIL(0xFA8). Please help, you can relply here, or go to my thread (https://www.hovatek.com/forum/thread-145...l#pid86370). I searched the internet for this error but I only found the 2004 version of the error not the 0xFA8 one. Please, I need help