Hovatek Forum MOBILE Android [Please help] Sp Flash tool Driver issue
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Sp Flash tool Driver issue

[Please help] Sp Flash tool Driver issue

Pages (2): 1 2 Next
Hex
Hex
Hex
Enthusiastic Member
12
31-07-2016, 06:30 PM
#1



I have a bricked Bluboo x550, phone refuses to power on, i tried flashing stock rom but i keep getting Enable DRAM Failed. My phone uses a non removable battery, i have installed Preloaded USB Vcom driver but flashtool seems not to recognise it, instead it uses the phone default driver which install whenever i plug the phone when switched off i.e MediaTek USB Port.
Attached Files
.png
Untitled.png
Size: 195.18 KB / Downloads: 10
matybazz
matybazz
matybazz
Senior Member
2,289
01-08-2016, 10:42 AM
#2
(31-07-2016, 06:30 PM)Hex I have a bricked Bluboo x550, phone refuses to power on, i tried flashing stock rom but i keep getting Enable DRAM Failed. My phone uses a non removable battery, i have installed Preloaded USB Vcom driver but flashtool seems not to recognise it, instead it uses the phone default driver which install whenever i plug the phone when switched off i.e MediaTek USB Port.

The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings
Refer to https://www.hovatek.com/forum/thread-439.html
Also send us a screenshot of spflashtool after you load the scatter file
Hex
Hex
Hex
Enthusiastic Member
12
01-08-2016, 11:43 AM
#3
(01-08-2016, 10:42 AM)matybazz
(31-07-2016, 06:30 PM)Hex I have a bricked Bluboo x550, phone refuses to power on, i tried flashing stock rom but i keep getting Enable DRAM Failed. My phone uses a non removable battery, i have installed Preloaded USB Vcom driver but flashtool seems not to recognise it, instead it uses the phone default driver which install whenever i plug the phone when switched off i.e MediaTek USB Port.

The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings
Refer to https://www.hovatek.com/forum/thread-439.html
Also send us a screenshot of spflashtool after you load the scatter file

Im certain my rom is correct...tried it with 3 different roms
This post was last modified: 01-08-2016, 04:09 PM by Hex.
Attached Files
.jpg
Untitled.jpg
Size: 342.46 KB / Downloads: 8
Hex
Hex
Hex
Enthusiastic Member
12
01-08-2016, 04:51 PM
#4
Note: I was able to format with out any problem atleast that's what caused this mess in the first place but i cant back the rom
matybazz
matybazz
matybazz
Senior Member
2,289
01-08-2016, 06:35 PM
#5



(01-08-2016, 11:43 AM)Hex Im certain my rom is correct...tried it with 3 different roms

Tick only preloader and flash lets see... Also what is the tee1 and tee2 did it come with the firmware?
X3non
X3non
X3non
Recognized Contributor
22,062
01-08-2016, 06:37 PM
#6
(01-08-2016, 04:51 PM)Hex Note: I was able to format with out any problem atleast that's what caused this mess in the first place but i cant back the rom

Also check if you have this stock rom @ https://docs.google.com/uc?id=0B2IjFi1Xq...zV1dkdwQTQ
if you dont, then download and try flashing it
This post was last modified: 01-08-2016, 06:39 PM by X3non.
hovatek
hovatek
hovatek
Administrator
49,570
01-08-2016, 09:52 PM
#7
seems there are multiple variants of the phone

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Hex
Hex
Hex
Enthusiastic Member
12
02-08-2016, 12:09 AM
#8
(01-08-2016, 06:35 PM)matybazz
(01-08-2016, 11:43 AM)Hex Im certain my rom is correct...tried it with 3 different roms

Tick only preloader and flash lets see... Also what is the tee1 and tee2 did it come with the firmware?

Yes it comes with the Rom
.png
Untitled5.png
Size: 323.64 KB / Downloads: 19


I tried flashing a different preloader (inew L4a, similar rom) with my phones rom scatter file
.png
Untitled6.png
Size: 299.39 KB / Downloads: 9
Hex
Hex
Hex
Enthusiastic Member
12
02-08-2016, 12:17 AM
#9
(01-08-2016, 06:37 PM)X3non
(01-08-2016, 04:51 PM)Hex Note: I was able to format with out any problem atleast that's what caused this mess in the first place but i cant back the rom

Also check if you have this stock rom @ https://docs.google.com/uc?id=0B2IjFi1Xq...zV1dkdwQTQ
if you dont, then download and try flashing it

I have that rom

Mediatek Preloader Vcom is not listed in USBDeview
.png
Untitled8.png
Size: 230.47 KB / Downloads: 4
major.b2b100
major.b2b100
major.b2b100
Senior Member
159
02-08-2016, 12:29 AM
#10



(01-08-2016, 10:42 AM)matybazz
(31-07-2016, 06:30 PM)Hex I have a bricked Bluboo x550, phone refuses to power on, i tried flashing stock rom but i keep getting Enable DRAM Failed. My phone uses a non removable battery, i have installed Preloaded USB Vcom driver but flashtool seems not to recognise it, instead it uses the phone default driver which install whenever i plug the phone when switched off i.e MediaTek USB Port.

The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings
Refer to https://www.hovatek.com/forum/thread-439.html
Also send us a screenshot of spflashtool after you load the scatter file

Sorry, in the fist place how did you get your device bricked.???
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram