Hovatek Forum MOBILE Android [Please help] MY TECNO P5 IS DEAD PLS HELP
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] MY TECNO P5 IS DEAD PLS HELP

[Please help] MY TECNO P5 IS DEAD PLS HELP

Pages (2): 1 2 Next
emmynoni
emmynoni
emmynoni
Junior Member
18
08-08-2016, 05:34 PM
#1



Pls help with my tecno p5 old version, it always shows tecno logo, but now is not showing again and not charging.

i connected it to pc with vcom drivers, it detects my phone, but when i download ur p5 rom, i tried flashing it with sp flash tools, it will just stop at "FORMAT 0%" but not reading, i tried charging the phone, for over an hour now its not charging at all, but the PC is detecting the phone, pls what can i do.

Thanks!
hovatek
hovatek
hovatek
Administrator
49,570
09-08-2016, 09:42 AM
#2
(08-08-2016, 05:34 PM)emmynoni Pls help with my tecno p5 old version, it always shows tecno logo, but now is not showing again and not charging.

i connected it to pc with vcom drivers, it detects my phone, but when i download ur p5 rom, i tried flashing it with sp flash tools, it will just stop at "FORMAT 0%" but not reading, i tried charging the phone, for over an hour now its not charging at all, but the PC is detecting the phone, pls what can i do.

Thanks!

Ensure to install VCOM drivers @ https://www.hovatek.com/forum/thread-440.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
emmynoni
emmynoni
emmynoni
Junior Member
18
09-08-2016, 11:33 AM
#3
(09-08-2016, 09:42 AM)hovatek
(08-08-2016, 05:34 PM)emmynoni Pls help with my tecno p5 old version, it always shows tecno logo, but now is not showing again and not charging.

i connected it to pc with vcom drivers, it detects my phone, but when i download ur p5 rom, i tried flashing it with sp flash tools, it will just stop at "FORMAT 0%" but not reading, i tried charging the phone, for over an hour now its not charging at all, but the PC is detecting the phone, pls what can i do.

Thanks!

Ensure to install VCOM drivers @ https://www.hovatek.com/forum/thread-440.html


I installed vcom drivers,  connect my sp flash tools, click on format, clicked start, removed my battery and slot it back, connect my USB cord, it read 100% first, then later started with FORMAT 0%, waited for four minutes, I got this reply, ERROR BROM BLA BLA BLA.....  SOMETHING LIKE SETTINGS IS NOT CORRECT,
pls what can I do, help me out

It shows FORMAT FLASH ERROR, PLEASE CHECK YOUR FORMAT SETTINGS, I use both sp flash tool version 5 and 3
This post was last modified: 09-08-2016, 11:42 AM by emmynoni. Edit Reason: More complains
emmynoni
emmynoni
emmynoni
Junior Member
18
09-08-2016, 12:22 PM
#4
as a matter of facts, i saw one of your post about tecno dead phones, using PRELOADER.BIN to make it come alive, still not working for me, please what can i do, i really need your help on this, flashing of infinix is very easy, but this tecno is too difficult
matybazz
matybazz
matybazz
Senior Member
2,289
09-08-2016, 02:20 PM
#5



(09-08-2016, 11:33 AM)emmynoni I installed vcom drivers,  connect my sp flash tools, click on format, clicked start, removed my battery and slot it back, connect my USB cord, it read 100% first, then later started with FORMAT 0%, waited for four minutes, I got this reply, ERROR BROM BLA BLA BLA.....  SOMETHING LIKE SETTINGS IS NOT CORRECT,
pls what can I do, help me out

It shows FORMAT FLASH ERROR, PLEASE CHECK YOUR FORMAT SETTINGS,  I use both sp flash tool version 5 and 3

Send a screenshot of the error
emmynoni
emmynoni
emmynoni
Junior Member
18
10-08-2016, 08:53 AM
#6
(09-08-2016, 02:20 PM)matybazz
(09-08-2016, 11:33 AM)emmynoni I installed vcom drivers,  connect my sp flash tools, click on format, clicked start, removed my battery and slot it back, connect my USB cord, it read 100% first, then later started with FORMAT 0%, waited for four minutes, I got this reply, ERROR BROM BLA BLA BLA.....  SOMETHING LIKE SETTINGS IS NOT CORRECT,
pls what can I do, help me out

It shows FORMAT FLASH ERROR, PLEASE CHECK YOUR FORMAT SETTINGS,  I use both sp flash tool version 5 and 3

Send a screenshot of the error

I chatted with one of ur members online, he told me to flash the preloader.bin, it worked, and my phone is power up, but it only stuck at tecno logo, so I tried during the full flashing, it keep poping out "PMT changed for the ROM, it must be downloaded"
matybazz
matybazz
matybazz
Senior Member
2,289
10-08-2016, 10:58 AM
#7
(10-08-2016, 08:53 AM)emmynoni I chatted with one of ur members online, he told me to flash the preloader.bin, it worked, and my phone is power up, but it only stuck at tecno logo, so I tried during the full flashing, it keep poping out "PMT changed for the ROM, it must be downloaded"

What is the colour of the first tecno logo after you boot the phone?
emmynoni
emmynoni
emmynoni
Junior Member
18
10-08-2016, 12:16 PM
#8
(10-08-2016, 10:58 AM)matybazz
(10-08-2016, 08:53 AM)emmynoni I chatted with one of ur members online, he told me to flash the preloader.bin, it worked, and my phone is power up, but it only stuck at tecno logo, so I tried during the full flashing, it keep poping out "PMT changed for the ROM, it must be downloaded"

What is the colour of the first tecno logo after you boot the phone?


It was blue, now its not powering up again, thinking maybe d battery is dead again
emmynoni
emmynoni
emmynoni
Junior Member
18
10-08-2016, 12:19 PM
#9
(10-08-2016, 10:58 AM)matybazz
(10-08-2016, 08:53 AM)emmynoni I chatted with one of ur members online, he told me to flash the preloader.bin, it worked, and my phone is power up, but it only stuck at tecno logo, so I tried during the full flashing, it keep poping out "PMT changed for the ROM, it must be downloaded"

What is the colour of the first tecno logo after you boot the phone?


It was blue, now its not powering up again, thinking maybe d battery is dead again
matybazz
matybazz
matybazz
Senior Member
2,289
10-08-2016, 02:48 PM
#10



(10-08-2016, 12:19 PM)emmynoni It was blue, now its not powering up again, thinking maybe d battery is dead again

Use format+download or firmware upgrade settings in spflashtool
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram