Hovatek Forum MOBILE Android [Please help] Flashing huawei y541-uo2/ huawei y5c
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Flashing huawei y541-uo2/ huawei y5c

[Please help] Flashing huawei y541-uo2/ huawei y5c

Pages (3): 1 2 3 Next
Jheiy
Jheiy
Jheiy
Enthusiastic Member
11
01-09-2016, 01:41 AM
#1



Good day! My huawei y5c is deadboot and need to flash but everytime i flashed, it stucked in _REPARTITION_ "failed: wait input timeout". I tried b105 and b106 firmware, and many version of research and upgrade download..  Please help..  Thanks in advance!!!
This post was last modified: 01-09-2016, 01:43 AM by Jheiy.
Attached Files
.jpg
FB_IMG_1472559607839.jpg
Size: 29.54 KB / Downloads: 11
anil dasari
anil dasari
anil dasari
Senior Member
137
01-09-2016, 05:38 AM
#2
Build no:108 available in market please download and create dload folder in sd card and copy the same install the same through recovery mode
Jheiy
Jheiy
Jheiy
Enthusiastic Member
11
01-09-2016, 05:42 AM
#3
(01-09-2016, 05:38 AM)anil dasari Build no:108 available in market please download and create dload folder in sd card and copy the same install the same through recovery mode

Sir my phone is dead, cant access to recovery mode.. [CRYING FACE]

Sent from my Lenovo A5000 using Hovatek mobile
hovatek
hovatek
hovatek
Administrator
49,570
01-09-2016, 04:29 PM
#4
(01-09-2016, 01:41 AM)Jheiy Good day! My huawei y5c is deadboot and need to flash but everytime i flashed, it stucked in _REPARTITION_ "failed: wait input timeout". I tried b105 and b106 firmware, and many version of research and upgrade download..  Please help..  Thanks in advance!!!

Untick all except fdl 1&2 and cache then try flashing again

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Jheiy
Jheiy
Jheiy
Enthusiastic Member
11
02-09-2016, 02:51 AM
#5



(01-09-2016, 04:29 PM)hovatek
(01-09-2016, 01:41 AM)Jheiy Good day! My huawei y5c is deadboot and need to flash but everytime i flashed, it stucked in _REPARTITION_ "failed: wait input timeout". I tried b105 and b106 firmware, and many version of research and upgrade download..  Please help..  Thanks in advance!!!

Untick all except fdl 1&2 and cache then try flashing again

Same result sir.. _REPARTITION_ failed input timeout,, when i untick the repartition, it says that "incompatible partition"

Sent from my Lenovo A5000 using Hovatek mobile
hovatek
hovatek
hovatek
Administrator
49,570
03-09-2016, 09:33 AM
#6
(02-09-2016, 02:51 AM)Jheiy Same result sir.. _REPARTITION_ failed input timeout,, when i untick the repartition, it says that "incompatible partition"

Sent from my Lenovo A5000 using Hovatek mobile

Possibly a driver issue. Update the driver using the "Research / Upgrade download tool does not show waiting.... instead, the phone just charges" guide @ https://www.hovatek.com/forum/thread-4870.html
This post was last modified: 03-09-2016, 09:34 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Jheiy
Jheiy
Jheiy
Enthusiastic Member
11
04-09-2016, 04:39 PM
#7
(03-09-2016, 09:33 AM)hovatek
(02-09-2016, 02:51 AM)Jheiy Same result sir..  _REPARTITION_ failed input timeout,,  when i untick the repartition,  it says that "incompatible partition"

Sent from my Lenovo A5000 using Hovatek mobile

Possibly a driver issue. Update the driver using the "Research / Upgrade download tool does not show waiting.... instead, the phone just charges" guide @ https://www.hovatek.com/forum/thread-4870.html
research/ upgrade tool does responsed..  fdl 1&2 are downloaded,, after that _REPARTITION_ appeared and become status failed input timeout.. Please help..
Attached Files
.png
Screenshot (52).png
Size: 427.98 KB / Downloads: 4
.png
Screenshot (51).png
Size: 474.59 KB / Downloads: 1
hovatek
hovatek
hovatek
Administrator
49,570
04-09-2016, 08:06 PM
#8
(04-09-2016, 04:39 PM)Jheiy research/ upgrade tool does responsed..  fdl 1&2 are downloaded,, after that _REPARTITION_ appeared and become status failed input timeout.. Please help..

Try fdl 1&2 and userdata
This post was last modified: 04-09-2016, 08:07 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Jheiy
Jheiy
Jheiy
Enthusiastic Member
11
05-09-2016, 07:47 AM
#9
Same result sir,, how can i bypass repartition process?
hovatek
hovatek
hovatek
Administrator
49,570
05-09-2016, 12:53 PM
#10



(05-09-2016, 07:47 AM)Jheiy Same result sir,, how can i bypass repartition process?

Are you certain these pac files are for your variant?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (3): 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram