[Tutorial] pc not displaying after shutdown

[ham_samm]

Hello, my dam pc just started this **** of nt displaying anything after on it (pressing power button)

The problem is when I on it u will on after oning it won't display anything
I tried removing D Ba3, I waited for it to cool all are just in vain, it dint display

What d problem
Pls help

[X3non]

Hello, my dam pc just started this **** of nt displaying anything after on it (pressing power button)

The problem is when I on it u will on after oning it won't display anything
I tried removing D Ba3, I waited for it to cool all are just in vain, it dint display

What d problem
Pls help

* 1st test your PC using an external monitor if it still doesnt display
* Then take out the ram > clean the RAM slots with a brush then reinsert the RAM(s) back. You can also try using a different RAM if you have any spares
* If it still doesn't work then check the VGA and Processor

[ham_samm]

Hello, my dam pc just started this **** of nt displaying anything after on it (pressing power button)

The problem is when I on it u will on after oning it won't display anything
I tried removing D Ba3, I waited for it to cool all are just in vain, it dint display

What d problem
Pls help

* 1st test your PC using an external monitor if it still doesnt display
* Then take out the ram > clean the RAM slots with a brush then reinsert the RAM(s) back. You can also try using a different RAM if you have any spares
* If it still doesn't work then check the VGA and Processor

Alryt thanks

will give a try

[ham_samm]

Hello, my dam pc just started this **** of nt displaying anything after on it (pressing power button)

The problem is when I on it u will on after oning it won't display anything
I tried removing D Ba3, I waited for it to cool all are just in vain, it dint display

What d problem
Pls help

* 1st test your PC using an external monitor if it still doesnt display
* Then take out the ram > clean the RAM slots with a brush then reinsert the RAM(s) back. You can also try using a different RAM if you have any spares
* If it still doesn't work then check the VGA and Processor

THANKS
hv tried using another monitor ,
cleaning the ram slots both dint work

my pc is a laptop ,hw do i go abt the vga n processor

[matybazz]

THANKS
hv tried using another monitor ,
cleaning the ram slots  both dint work

my pc is a laptop ,hw do i go abt the vga n processor

Did it display atall when you used another monitor?

[ham_samm]

THANKS
hv tried using another monitor ,
cleaning the ram slots  both dint work

my pc is a laptop ,hw do i go abt the vga n processor

Did it display atall when you used another monitor?

Noo not at all

[ham_samm]

Hello, my dam pc just started this **** of nt displaying anything after on it (pressing power button)

The problem is when I on it u will on after oning it won't display anything
I tried removing D Ba3, I waited for it to cool all are just in vain, it dint display

What d problem
Pls help

* 1st test your PC using an external monitor if it still doesnt display
* Then take out the ram > clean the RAM slots with a brush then reinsert the RAM(s) back. You can also try using a different RAM if you have any spares
* If it still doesn't work then check the VGA and Processor

X3non

Hovatek


Kindly reply

[hovatek]

Noo not at all

You should have the Motherboard checked then