[Please help] Can't backup Huawei Y3 II
[Please help] Can't backup Huawei Y3 II
(25-11-2016, 11:56 PM)WeonherHello community. I'm here to request some help about backing up my ROM since there is no official firmware launched for this 'recent' device.
Here are the specs:Huawei Y3 II LUA-U23 (Double-Sim)Processor: MT6582MChipset: Mali-400MP2RAM: 1Gb
Initially I tried to do the backup with MTKDroidTools but I get "ERROR: Zero file, no space left on device!" with preloader and dsp_ even when I used a 16gb SD and installed busybox. I have to mention that I rooted my device with Kingroot (via pc 'cause apk didn't work) and had to install abdb insecure 2.0 to get Backup option working.
Due that, I decided to use SPFlashTools dumping solution (readback) but I get stucked at "Error 0×7D4 Message: BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL" and I couldn't go any further. Of course I've changed drivers, SPFlashTools version, pc, USB cord, checked battery level and everything seems to work but I had no luck with it. Sometimes when I unplug the phone SPFlashTools shows 0x7D5 error but I have no clue what could be happening. I really appreciate any reply to this topic 'cause I'm kinda worried about future bricks in my device.
Thanks in advance.
(26-11-2016, 08:56 AM)hovatek use Miracle Box @ https://www.hovatek.com/forum/thread-13347.html
(26-11-2016, 08:56 AM)hovatek use Miracle Box @ https://www.hovatek.com/forum/thread-13347.html
(28-11-2016, 05:53 PM)Weonher Ok, it didn't work. I spent almost 2 days switching between installing drivers and rebooting but I couldn't make it work. I even tried all guides supplied in this thread https://www.hovatek.com/forum/thread-13498.html and same error:
Waiting for USB Port...
Waiting for USB Port...
>>none usbport, maybe driver not installed
What could I do next?
(29-11-2016, 10:58 AM)hovatek what does the phone get detected as in Device Manager when you switch off and connect to PC
(30-11-2016, 12:16 AM)Weonher Phone gets detected by Device manager and makes the plugged sound but it disconnects almost 1 second later and starts charging. It does the same with all drivers I tried.
(30-11-2016, 10:15 AM)hovatek You'll need to apply the connection-disconnection fix @ https://www.hovatek.com/forum/thread-439.html
you should be at Device Manager immediately you connect and scroll down to Ports to see what has newly appeared
(30-11-2016, 10:15 AM)hovatek(30-11-2016, 12:16 AM)Weonher Phone gets detected by Device manager and makes the plugged sound but it disconnects almost 1 second later and starts charging. It does the same with all drivers I tried.
You'll need to apply the connection-disconnection fix @ https://www.hovatek.com/forum/thread-439.html
you should be at Device Manager immediately you connect and scroll down to Ports to see what has newly appeared