Hovatek Forum HARDWARE Repairs Tecno d5
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Tecno d5

Tecno d5

Pages (2): 1 2 Next
prince1111
prince1111
prince1111
Senior Member
608
13-01-2017, 01:08 PM
#1



Tecno d5 brick after flash with rung firmware.
Now it only vibrate when I connect it to system or press power button.
And the worst thing is that the phone cannot detect by flash tool. It vibrate when I plug it to PC.

Sent from my Infinix X510 using Hovatek mobile
prince1111
prince1111
prince1111
Senior Member
608
13-01-2017, 01:11 PM
#2
The phone was rejecting sim.
If I insert sim card into the phone the phone will off and if I remove sim it will work normally I also try several sim but the same thing.
But now it bricked

Best regards.

Sent from my Infinix X510 using Hovatek mobile
maxpayne
maxpayne
maxpayne
Contributor
2,873
13-01-2017, 01:50 PM
#3
(13-01-2017, 01:08 PM)prince1111 Tecno d5 brick after flash with rung firmware.
Now it only vibrate when I connect it to system or press power button.
And the worst thing is that the phone cannot detect by flash tool. It vibrate when I plug it to PC.

Sent from my Infinix X510 using Hovatek mobile

You should consider https://www.hovatek.com/forum/thread-11802.html
prince1111
prince1111
prince1111
Senior Member
608
13-01-2017, 03:28 PM
#4
I have try the 3 steps illustrate and couldn't detect on PC
I also use defrent pc as well.
Bests regards.

Sent from my Infinix X510 using Hovatek mobile
hovatek
hovatek
hovatek
Administrator
49,570
13-01-2017, 07:07 PM
#5



(13-01-2017, 03:28 PM)prince1111 I have try the 3 steps illustrate and couldn't detect on PC
I also use defrent pc as well.
Bests regards.

Sent from my Infinix X510 using Hovatek mobile

Have you tried a motherboard jumper?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
prince1111
prince1111
prince1111
Senior Member
608
13-01-2017, 10:59 PM
#6
Motherboard jumper? Yes.
I connect gnd and gcolo together and it doesn't detect.

Sent from my Infinix X510 using Hovatek mobile
maxpayne
maxpayne
maxpayne
Contributor
2,873
14-01-2017, 10:02 AM
#7
(13-01-2017, 10:59 PM)prince1111 Motherboard jumper? Yes.
I connect gnd and gcolo together and it doesn't detect.

Sent from my Infinix X510 using Hovatek mobile

Which firmware did you flash initially?
Remove all MTK drivers with USB Deview then reinstall
prince1111
prince1111
prince1111
Senior Member
608
14-01-2017, 02:28 PM
#8
Hmmmmmmm
I mean the phone didn't even make a sound that phone plug in to PC.


Sent from my Infinix X510 using Hovatek mobile
shigege
shigege
shigege
Senior Member
162
14-01-2017, 10:15 PM
#9
(14-01-2017, 02:28 PM)prince1111 Hmmmmmmm
I mean the phone didn't even make a sound that phone plug in to PC.


Sent from my Infinix X510 using Hovatek mobile

that means you will need to replace the emmc chip or rewrite the software to it using an emmc socket
prince1111
prince1111
prince1111
Senior Member
608
15-01-2017, 02:52 PM
#10



OK
How can I get the emmc socket??

Sent from my Infinix X510 using Hovatek mobile
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram