Hovatek Forum
Review:Itel A32F hands-on review... READ MORE (Jun, 2018)
[Please help] INFINIX X551 CLONE DEAD - Printable Version

+- Hovatek Forum (https://forum.hovatek.com)
+-- Forum: MOBILE PHONES HELP SECTION (https://forum.hovatek.com/forum-75.html)
+--- Forum: Android (https://forum.hovatek.com/forum-76.html)
+--- Thread: [Please help] INFINIX X551 CLONE DEAD (/thread-16248.html)



INFINIX X551 CLONE DEAD - chikaubah - 12-07-2016

HELLO FRIENDS GOOD DAY TP YOUU I AM IN A BIG TROUBLE 

I MISTAKENLY FLASHED AN ORIGINAL INFINIX X551 ON THE CLONE VERSION BOTH DEVICE 16+1 

I LATER DOWNLOADED THE CLONE ROM BUT WHEN I WANT TO FLASH IT THROUGH SP FLASH TOOL IT GIVES THIS ERROR S_FT_ENABLE_DRAM_FAIL (0xFC0) 

WHEN I TRY MIRACLE BOX IT GIVES >>ERR21002.00
THEN NCK MTK DONGLE GIVES THIS ERROR
 Action : Format Full Except Preloader.
 Selected 0-By CPUM 0-By CPUMT6571_EMMC
 Exe version: NCKDongle AndroidMTK 2.5.6.2
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MTK USB Port (COM28)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BBCHIP MT6580_S00
 Connect error[4032]: S_FT_ENABLE_DRAM_FAIL
 Boot Fail.!!!.
 All done. PLZ HELP ME IT DETECTECT BUT WONT FLASH


RE: INFINIX X551 CLONE DEAD - hovatek - 12-08-2016

(12-07-2016, 05:20 PM)chikaubah Wrote:  HELLO FRIENDS GOOD DAY TP YOUU I AM IN A BIG TROUBLE 

I MISTAKENLY FLASHED AN ORIGINAL INFINIX X551 ON THE CLONE VERSION BOTH DEVICE 16+1 

I LATER DOWNLOADED THE CLONE ROM BUT WHEN I WANT TO FLASH IT THROUGH SP FLASH TOOL IT GIVES THIS ERROR S_FT_ENABLE_DRAM_FAIL (0xFC0) 

WHEN I TRY MIRACLE BOX IT GIVES >>ERR21002.00
THEN NCK MTK DONGLE GIVES THIS ERROR
 Action : Format Full Except Preloader.
 Selected 0-By CPUM 0-By CPUMT6571_EMMC
 Exe version: NCKDongle AndroidMTK 2.5.6.2
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MTK USB Port (COM28)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BBCHIP MT6580_S00
 Connect error[4032]: S_FT_ENABLE_DRAM_FAIL
 Boot Fail.!!!.
 All done. PLZ HELP ME IT DETECTECT BUT WONT FLASH

error 4032 is a mismatch error ( https://forum.hovatek.com/thread-439.html )
The Clone firmware isn't compatible with the device.
How did you discover that its a clone?


RE: INFINIX X551 CLONE DEAD - chikaubah - 12-09-2016

the camera flash the panel the batter fled plug the touch screen is a flat fled instead of plug the panel design is different from original the way they wrote the hote note is in italics


RE: INFINIX X551 CLONE DEAD - chikaubah - 12-09-2016

i have tried bridging kcolo with gnd but still yet no go


RE: INFINIX X551 CLONE DEAD - hovatek - 12-09-2016

(12-09-2016, 09:46 AM)chikaubah Wrote:  the camera flash the panel the batter fled plug the touch screen is a flat fled instead of plug the panel design is different from original the way they wrote the hote note is in italics

(12-09-2016, 09:50 AM)chikaubah Wrote:  i have tried bridging kcolo with gnd but still yet no go

Its scary to know that clones might also have variants.
I need to ask, when you flashed the original, did you get the 100% OK? Also, how did the device behave?


RE: INFINIX X551 CLONE DEAD - apara - 12-09-2016

(12-09-2016, 02:24 PM)hovatek Wrote:  
(12-09-2016, 09:46 AM)chikaubah Wrote:  the camera flash the panel the batter fled plug the touch screen is a flat fled instead of plug the panel design is different from original the way they wrote the hote note is in italics

(12-09-2016, 09:50 AM)chikaubah Wrote:  i have tried bridging kcolo with gnd but still yet no go

Its scary to know that clones might also have variants.
I need to ask, when you flashed the original, did you get the 100% OK? Also, how did the device behave?

Bro x551 clone got like 3 to 4 variants ....does your own show "xui" animation?.....I think its not flashing because you don't have the correct preloader on the phone...try flashing on preloader using that nck....I have a related issue last week but thank God I keep a back up of the clone 551...that's what really save my ***


RE: INFINIX X551 CLONE DEAD - chikaubah - 12-11-2016

MY X551 CLONE IS NON REMOVABLE BATTERY AND I WILL TRY AND FIND OTHER ROM

Sent from my Infinix HOT 4 using Hovatek mobile


RE: INFINIX X551 CLONE DEAD - chikaubah - 12-19-2016

can this get anymore worse i borrow another working clone which is the same build i mean the exact version but when am trying to back the phone with miracle it back up to an extent and give a error that say (port error) please i have tried several tool se pros

Sent from my Infinix HOT 4 using Hovatek mobile


RE: INFINIX X551 CLONE DEAD - hovatek - 12-20-2016

(12-19-2016, 09:48 PM)chikaubah Wrote:  can this get anymore worse i borrow another working clone which is the same build i mean the exact version but when am trying to back the phone with miracle it back up to an extent and give a error that say (port error) please i have tried several tool se pros

Sent from my Infinix HOT 4 using Hovatek mobile

uninstall all MTK drivers using USB deview then reinstall VCOM drivers and ADB drivers ( https://forum.hovatek.com/thread-588.html )