Hovatek Forum
Review:Itel A32F hands-on review... READ MORE (Jun, 2018)
[Please help] Vodafone VDF 300 Stuck a Startup with a rounding ball - Printable Version

+- Hovatek Forum (https://forum.hovatek.com)
+-- Forum: MOBILE PHONES HELP SECTION (https://forum.hovatek.com/forum-75.html)
+--- Forum: Android (https://forum.hovatek.com/forum-76.html)
+--- Thread: [Please help] Vodafone VDF 300 Stuck a Startup with a rounding ball (/thread-16641.html)



Vodafone VDF 300 Stuck a Startup with a rounding ball - christopher isohe - 01-06-2017

Dear Hovatek Members,

I have a Vodaphone Smart Mini 7 which was accidentally factory restored. After restarting it now  needs to repair Google Factory Reset Protection. I used Infinity Box to clear settings. After restarting the phone it hangs/stuck on startup for hours now "A rounding ball appears". I did try to flash with this firmware Vodafone_VFD_300_MT6580_6.0_V2.34_JHZ6580_P23 but still it is stuck with a rounding ball at startup.

How do i revive my phone. Your assistance is highly appreciated.

The Smart phone with the following specifications:
Vodafone 300 firmware
CPU is Mediatek MT6580 ,
Brand : Vodafone
ProdName : Smart_mini7
ProdModel : VFD 300
Device : VFD300
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_jhz6580.weg.vf.m_P38

ADDITIONAL SPECIFICATION INFORMATION:
Boot Info :
BB_CPU_ID : 6580
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6580_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447453000A05C18843359
DA Stat : v4.2 on BBID : 0x94
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 0EG40
[eMMC] : FLASH_CID : 11010030303447453000A05C18843359
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


RE: Vodafone VDF 300 Stuck a Startup with a rounding ball - X3non - 01-06-2017

(01-06-2017, 01:21 PM)christopher isohe Wrote:  Dear Hovatek Members,

I have a Vodaphone Smart Mini 7 which was accidentally factory restored. After restarting it now  needs to repair Google Factory Reset Protection. I used Infinity Box to clear settings. After restarting the phone it hangs/stuck on startup for hours now "A rounding ball appears". I did try to flash with this firmware Vodafone_VFD_300_MT6580_6.0_V2.34_JHZ6580_P23 but still it is stuck with a rounding ball at startup.
...
if flashing was successful, then
boot into Recovery mode using the guide @ https://forum.hovatek.com/thread-479.html
then do a factory reset in recovery mode
OR
boot into Factory mode using the guide @ https://forum.hovatek.com/thread-13850.html
then do an eMMC wipe in factory mode


RE: Vodafone VDF 300 Stuck a Startup with a rounding ball - Bonaventure Kachila - 02-04-2018

(01-06-2017, 01:21 PM)christopher isohe Wrote:  Dear Hovatek Members,

I have a Vodaphone Smart Mini 7 which was accidentally factory restored. After restarting it now  needs to repair Google Factory Reset Protection. I used Infinity Box to clear settings. After restarting the phone it hangs/stuck on startup for hours now "A rounding ball appears". I did try to flash with this firmware Vodafone_VFD_300_MT6580_6.0_V2.34_JHZ6580_P23 but still it is stuck with a rounding ball at startup.

How do i revive my phone. Your assistance is highly appreciated.

The Smart phone with the following specifications:
Vodafone 300 firmware
CPU is Mediatek MT6580 ,
Brand : Vodafone
ProdName : Smart_mini7
ProdModel : VFD 300
Device : VFD300
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_jhz6580.weg.vf.m_P38

ADDITIONAL SPECIFICATION INFORMATION:
Boot Info :
BB_CPU_ID : 6580
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6580_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447453000A05C18843359
DA Stat : v4.2 on BBID : 0x94
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 0EG40
[eMMC] : FLASH_CID : 11010030303447453000A05C18843359
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!