Hovatek Forum
Review:Itel A32F hands-on review... READ MORE (Jun, 2018)
[Please help] INFINIX NOTE 3 x601 DEAD AFTER WRONG PRELOADER!! - Printable Version

+- Hovatek Forum (https://forum.hovatek.com)
+-- Forum: HARDWARE (https://forum.hovatek.com/forum-42.html)
+--- Forum: Mobile phones and accesories (https://forum.hovatek.com/forum-43.html)
+--- Thread: [Please help] INFINIX NOTE 3 x601 DEAD AFTER WRONG PRELOADER!! (/thread-19081.html)



INFINIX NOTE 3 x601 DEAD AFTER WRONG PRELOADER!! - CINO22 - 07-01-2017

[img]Pls i need help now! <br />my computer can't find the infinix note 3 x601 again!<br />after a friend mistakenly flash a wrong update to it.<br />pls how do i solder the "GND" bla bla bla!<br />i can see GND & COLO somewhere in the board. don't know what to do next.<br />pls i'm stressed up! since three days now. i've tried all the soft unbricking method....i.e three key combos! still to no avail. pls below is the photo of the circuit board.....[/img]
https://ibb.co/nFdNnk
https://ibb.co/fScttQ
https://ibb.co/k0YzYQ
https://ibb.co/nuuv7k


RE: INFINIX NOTE 3 x601 DEAD AFTER WRONG PRELOADER!! - maxpayne - 07-01-2017

(07-01-2017, 03:01 PM)CINO22 Wrote:  [img]Pls i need help now! <br />my computer can't find the infinix note 3 x601 again!<br />after a friend mistakenly flash a wrong update to it.<br />pls how do i solder the "GND" bla bla bla!<br />i can see GND & COLO somewhere in the board. don't know what to do next.<br />pls i'm stressed up! since three days now. i've tried all the soft unbricking method....i.e three key combos! still to no avail. pls below is the photo of the circuit board.....[/img]
https://ibb.co/nFdNnk
https://ibb.co/fScttQ
https://ibb.co/k0YzYQ
https://ibb.co/nuuv7k

Attach a second picture showing the other side of the board

Sent from my Infinix X510 using Hovatek Forum


RE: INFINIX NOTE 3 x601 DEAD AFTER WRONG PRELOADER!! - innagee - 07-02-2017

(07-01-2017, 03:01 PM)CINO22 Wrote:  [img]Pls i need help now! <br />my computer can't find the infinix note 3 x601 again!<br />after a friend mistakenly flash a wrong update to it.<br />pls how do i solder the "GND" bla bla bla!<br />i can see GND & COLO somewhere in the board. don't know what to do next.<br />pls i'm stressed up! since three days now. i've tried all the soft unbricking method....i.e three key combos! still to no avail. pls below is the photo of the circuit board.....[/img]
https://ibb.co/nFdNnk
https://ibb.co/fScttQ
https://ibb.co/k0YzYQ
https://ibb.co/nuuv7k

Watch the video guide @ https://forum.hovatek.com/thread-11802.html