Hovatek Forum
[Please help] Infinix X601 Stock ROM flashing error - Printable Version

+- Hovatek Forum (https://forum.hovatek.com)
+-- Forum: MOBILE PHONES HELP SECTION (https://forum.hovatek.com/forum-75.html)
+--- Forum: Android (https://forum.hovatek.com/forum-76.html)
+--- Thread: [Please help] Infinix X601 Stock ROM flashing error (/thread-22197.html)

Pages: 1 2


Infinix X601 Stock ROM flashing error - bobbyzoltan - 03-03-2018

I did a factory reset on my rooted device and it only booted to the recovery. Then i flashed the stock rom which bricked the device. Now when i try flashing again with SP flashtool it says "cannot pass bootrom error 2005". I used Infinix flash tool it says DRAM error 4032 and also COM PORT error. Pls help as i really need to fix this device. Thanks guys


RE: Infinix X601 Stock ROM flashing error - X3non - 03-03-2018

(03-03-2018, 05:44 PM)bobbyzoltan Wrote:  I did a factory reset on my rooted device and it only booted to the recovery. Then i flashed the stock rom which bricked the device. Now when i try flashing again with SP flashtool it says "cannot pass bootrom error 2005". I used Infinix flash tool it says DRAM error 4032 and also COM PORT error. Pls help as i really need to fix this device. Thanks guys

whats the current state of the phone now? [totally dead OR stuck at bootlogo]
was the initial flashing successful with a green tick?
and what's the original build number of the device?


RE: Infinix X601 Stock ROM flashing error - bobbyzoltan - 03-03-2018

(03-03-2018, 07:02 PM)X3non Wrote:  
(03-03-2018, 05:44 PM)bobbyzoltan Wrote:  I did a factory reset on my rooted device and it only booted to the recovery. Then i flashed the stock rom which bricked the device. Now when i try flashing again with SP flashtool it says "cannot pass bootrom error 2005". I used Infinix flash tool it says DRAM error 4032 and also COM PORT error. Pls help as i really need to fix this device. Thanks guys

whats the current state of the phone now? [totally dead OR stuck at bootlogo]
was the initial flashing successful with a green tick?
and what's the original build number of the device?

Phone is totally dead
The initial flashing was successful
Build Number X601-H536A1-N-170520V152


RE: Infinix X601 Stock ROM flashing error - innagee - 03-04-2018

(03-03-2018, 07:25 PM)bobbyzoltan Wrote:  
(03-03-2018, 07:02 PM)X3non Wrote:  
(03-03-2018, 05:44 PM)bobbyzoltan Wrote:  I did a factory reset on my rooted device and it only booted to the recovery. Then i flashed the stock rom which bricked the device. Now when i try flashing again with SP flashtool it says "cannot pass bootrom error 2005". I used Infinix flash tool it says DRAM error 4032 and also COM PORT error. Pls help as i really need to fix this device. Thanks guys

whats the current state of the phone now? [totally dead OR stuck at bootlogo]
was the initial flashing successful with a green tick?
and what's the original build number of the device?

Phone is totally dead
The initial flashing was successful
Build Number  X601-H536A1-N-170520V152

If you're certain that this "X601-H536A1-N-170520V152" is the phone's original build no. and flashing the firmware with the same build no. listed @ https://forum.hovatek.com/thread-533.html was successful then it might be a battery drainage issue. Try charging the phone for some hours with original charger lets see.


RE: Infinix X601 Stock ROM flashing error - bobbyzoltan - 03-05-2018

Sorry for the misinformation. The original build number is X601-H536A1-M-160715V18 which is exactly the ROM I flashed. Although, the phone's panel was changed last year and I don't know if this affects the build number. Also how do i charge the battery? Just plug it in and leave it there?. Thanks guys.


RE: Infinix X601 Stock ROM flashing error - hovatek - 03-05-2018

(03-05-2018, 09:07 AM)bobbyzoltan Wrote:  Sorry for the misinformation. The original build number is X601-H536A1-M-160715V18 which is exactly the ROM I flashed. Although, the phone's panel was changed last year and I don't know if this affects the build number. Also how do i charge the battery? Just plug it in and leave it there?. Thanks guys.

So If I get you right, you were able to flash this rom successfully the first time but now get error 2005 and 4032?


RE: Infinix X601 Stock ROM flashing error - bobbyzoltan - 03-05-2018

So If I get you right, you were able to flash this rom successfully the first time but now get error 2005 and 4032?
[/quote]

Yes, that's exactly the issue.


RE: Infinix X601 Stock ROM flashing error - X3non - 03-05-2018

(03-05-2018, 12:08 PM)bobbyzoltan Wrote:  Yes, that's exactly the issue.

lets confirm some things properly, cos you've posted two build numbers and the PCB of your device has been changed as well
X601-H536A1-M-160715V18 was the build number before you changed the PCB

when did you successfully flash this ROM build [ X601-H536A1-M-160715V18 ] ; before or after changing the PCB?
when did you unsuccessfully flash the same ROM build [ X601-H536A1-M-160715V18 ] ; before or after changing PCB?
and where does this build number [ X601-H536A1-N-170520V152 ] come in?


RE: Infinix X601 Stock ROM flashing error - bobbyzoltan - 03-05-2018

(03-05-2018, 04:30 PM)X3non Wrote:  
(03-05-2018, 12:08 PM)bobbyzoltan Wrote:  Yes, that's exactly the issue.

lets confirm some things properly, cos you've posted two build numbers and the PCB of your device has been changed as well
X601-H536A1-M-160715V18 was the build number before you changed the PCB

when did you successfully flash this ROM build [ X601-H536A1-M-160715V18 ] ; before or after changing the PCB?
when did you unsuccessfully flash the same ROM build [ X601-H536A1-M-160715V18 ] ; before or after changing PCB?
and where does this build number [ X601-H536A1-N-170520V152 ] come in?

Ok thanks
1. Yes X601-H536A1-M-160715V18 is the original build number
2. The original ROM build was successfully flashed before the PCB change
3. The original ROM build was unsuccessfully flashed after the PCB change
4. That ROM build doesn't come in anywhere,it's an error from me


RE: Infinix X601 Stock ROM flashing error - hovatek - 03-06-2018

(03-05-2018, 07:45 PM)bobbyzoltan Wrote:  Ok thanks
1. Yes X601-H536A1-M-160715V18 is the original build number
2. The original ROM build was successfully flashed before the PCB change
3. The original ROM build was unsuccessfully flashed after the PCB change
4. That ROM build doesn't come in anywhere,it's an error from me

Changing the PCB must have also resulted in a change of which build / variant your phone is so it makes sense that the X601-H536A1-M-160715V18 gives an error. stop trying it. In fact, don't try flashing any ROM at all.
Here's what you're to do
Dump your phone' firmware in scatter format using Miracle Box at https://forum.hovatek.com/thread-13347.html

Let me know when done