Need firmware for Mobicell cherry tablet to fix unknown baseband -
Bernard Chongo - 28-03-2018
my phone lost baseband and imei and i can not figure out which firmware to use on it. please help.
RE: Need firmware for Mobicell cherry tablet to fix unknown baseband -
X3non - 28-03-2018
(28-03-2018, 11:11 AM)Bernard Chongo Wrote: my phone lost baseband and imei and i can not figure out which firmware to use on it. please help.
is yours single or dual sim?
RE: Need firmware for Mobicell cherry tablet to fix unknown baseband -
Bernard Chongo - 28-03-2018
(28-03-2018, 03:21 PM)X3non Wrote: (28-03-2018, 11:11 AM)Bernard Chongo Wrote: my phone lost baseband and imei and i can not figure out which firmware to use on it. please help.
is yours single or dual sim?
Single sim
RE: Need firmware for Mobicell cherry tablet to fix unknown baseband -
X3non - 28-03-2018
(28-03-2018, 03:47 PM)Bernard Chongo Wrote: Single sim
stock rom for single sim @ [
Login / Register to download free]
flash only secro, it should fix the unknown baseband
RE: Need firmware for Mobicell cherry tablet to fix unknown baseband -
Bernard Chongo - 30-03-2018
flashed the phone but now can not boot. Not sure what really went wrong. Here is what i did and could not get download okay massage.
RE: Need firmware for Mobicell cherry tablet to fix unknown baseband -
xerxes - 30-03-2018
(30-03-2018, 03:00 AM)Bernard Chongo Wrote: flashed the phone but now can not boot. Not sure what really went wrong. Here is what i did and could not get download okay massage.
It seems like the download was successful.
Take out/reinsert the battery then try powering it.
RE: Need firmware for Mobicell cherry tablet to fix unknown baseband -
Bernard Chongo - 30-03-2018
(30-03-2018, 09:26 AM)innagee Wrote: (30-03-2018, 03:00 AM)Bernard Chongo Wrote: flashed the phone but now can not boot. Not sure what really went wrong. Here is what i did and could not get download okay massage.
It seems like the download was successful.
Take out/reinsert the battery then try powering it.
The battery can not be removed and phone no responding to power button or cable to flash it again. behaving like a dead one.
RE: Need firmware for Mobicell cherry tablet to fix unknown baseband -
Bernard Chongo - 30-03-2018
(30-03-2018, 11:23 AM)Bernard Chongo Wrote: (30-03-2018, 09:26 AM)innagee Wrote: (30-03-2018, 03:00 AM)Bernard Chongo Wrote: flashed the phone but now can not boot. Not sure what really went wrong. Here is what i did and could not get download okay massage.
It seems like the download was successful.
Take out/reinsert the battery then try powering it.
I noticed that media tek Preloader usb vcom driver is not installing on my pc. Only media tek DA USB VCOM. can be seen. could that be the reason I did not get the download okay and fail to boot after flashing secro. Tried reinstalling the vcom drivers but only DA USB VCOM is appearing. what else can I do. I am using 32bit pc. Please help.
RE: Need firmware for Mobicell cherry tablet to fix unknown baseband -
X3non - 30-03-2018
(30-03-2018, 03:59 PM)Bernard Chongo Wrote: I noticed that media tek Preloader usb vcom driver is not installing on my pc. Only media tek DA USB VCOM. can be seen. could that be the reason I did not get the download okay and fail to boot after flashing secro. Tried reinstalling the vcom drivers but only DA USB VCOM is appearing. what else can I do. I am using 32bit pc. Please help.
your phone is dead due to interruption, either loosen the phone and disconnect / reconnect the battery OR keep charging till it powers on
refer to
https://forum.hovatek.com/thread-808.html
for the driver issue, doesn't matter if you are using 32bit and you only need one driver
uninstall all mtk drivers using usb deview @
https://forum.hovatek.com/thread-7660.html
reinstall vcom preloader driver using the guide @
https://forum.hovatek.com/thread-440.html
RE: Need firmware for Mobicell cherry tablet to fix unknown baseband -
Bernard Chongo - 30-03-2018
(30-03-2018, 05:49 PM)X3non Wrote: (30-03-2018, 03:59 PM)Bernard Chongo Wrote: I noticed that media tek Preloader usb vcom driver is not installing on my pc. Only media tek DA USB VCOM. can be seen. could that be the reason I did not get the download okay and fail to boot after flashing secro. Tried reinstalling the vcom drivers but only DA USB VCOM is appearing. what else can I do. I am using 32bit pc. Please help.
your phone is dead due to interruption, either loosen the phone and disconnect / reconnect the battery OR keep charging till it powers on
Thank you so much.