Hovatek Forum
[Tool] SP Flash Tool Not Doing Anything Once Plugged In - Printable Version

+- Hovatek Forum (https://forum.hovatek.com)
+-- Forum: MOBILE PHONES HELP SECTION (https://forum.hovatek.com/forum-75.html)
+--- Forum: Android (https://forum.hovatek.com/forum-76.html)
+--- Thread: [Tool] SP Flash Tool Not Doing Anything Once Plugged In (/thread-23030.html)



SP Flash Tool Not Doing Anything Once Plugged In - creeperdude997 - 02-06-2018

Having issues using SP Flash tool. Everything is set up correctly. Im trying to flash a boot.img file to a homtom se on MT6750T Chipset.
I open SP Flash tool and select the boot file and scatter file.
Power off my phone (battery not removable)
click the download button 
plug in device
HEAR the PC detect the device being plugged in
SP flash tool does nothing

I have tried using the boot keys (Volume Up/Volume Down/Power + Volume Up/ Power + Volume Down)
I have drivers and everything seems to be in check

Any help will do.


RE: SP Flash Tool Not Doing Anything Once Plugged In - xerxes - 02-06-2018

(02-06-2018, 12:32 PM)creeperdude997 Wrote:  Having issues using SP Flash tool. Everything is set up correctly. Im trying to flash a boot.img file to a homtom se on MT6750T Chipset.
I open SP Flash tool and select the boot file and scatter file.
Power off my phone (battery not removable)
click the download button 
plug in device
HEAR the PC detect the device being plugged in
SP flash tool does nothing

I have tried using the boot keys (Volume Up/Volume Down/Power + Volume Up/ Power + Volume Down)
I have drivers and everything seems to be in check

Any help will do.

uninstall VCOM drivers using USBDeview @ https://forum.hovatek.com/thread-7660.html
then properly reinstall using https://forum.hovatek.com/thread-440.html and retry the process. 

If the problem persist then, setup ADB using https://forum.hovatek.com/thread-588.html and see for how to flash boot.img using fastboot method @ https://forum.hovatek.com/thread-21427.html


RE: SP Flash Tool Not Doing Anything Once Plugged In - creeperdude997 - 02-06-2018

(02-06-2018, 01:04 PM)innagee Wrote:  uninstall VCOM drivers using USBDeview @ https://forum.hovatek.com/thread-7660.html
then properly reinstall using https://forum.hovatek.com/thread-440.html and retry the process. 

If the problem persist then, setup ADB using https://forum.hovatek.com/thread-588.html and see for how to flash boot.img using fastboot method @ https://forum.hovatek.com/thread-21427.html

Right so i got SP flash tool working, it told me i cant use download only mode so i switched to the mode it asked me and i got the following error:
"Partition [Preloader] no image file exist" where do i get said image file so i can flash the boot.img?


RE: SP Flash Tool Not Doing Anything Once Plugged In - X3non - 02-06-2018

(02-06-2018, 05:34 PM)creeperdude997 Wrote:  Right so i got SP flash tool working, it told me i cant use download only mode so i switched to the mode it asked me and i got the following error:
"Partition [Preloader] no image file exist" where do i get said image file so i can flash the boot.img?

stick to your original thread at https://forum.hovatek.com/thread-23002.html


RE: SP Flash Tool Not Doing Anything Once Plugged In - creeperdude997 - 02-06-2018

(02-06-2018, 06:47 PM)X3non Wrote:  
(02-06-2018, 05:34 PM)creeperdude997 Wrote:  Right so i got SP flash tool working, it told me i cant use download only mode so i switched to the mode it asked me and i got the following error:
"Partition [Preloader] no image file exist" where do i get said image file so i can flash the boot.img?

stick to your original thread at https://forum.hovatek.com/thread-23002.html

apologies, thought this classed as a separate issue