Hovatek Forum
Review:Itel A32F hands-on review... READ MORE (Jun, 2018)
[Tutorial] How to use Infinity CM2 to bypass MTK smartwatch lock code - Printable Version

+- Hovatek Forum (https://forum.hovatek.com)
+-- Forum: HARDWARE (https://forum.hovatek.com/forum-42.html)
+--- Forum: Boxes and Dongles (https://forum.hovatek.com/forum-111.html)
+--- Thread: [Tutorial] How to use Infinity CM2 to bypass MTK smartwatch lock code (/thread-23101.html)



How to use Infinity CM2 to bypass MTK smartwatch lock code - X3non - 06-09-2018

This guide will explain how to read or reset the unlock code of a Mediatek (MTK) Smart Watch using Infinity Chinese Miracle II (CM2) MTK.

Requirements


Steps to write read or reset the unlock code of a Mediatek (MTK) Smart Watch using Infinity Chinese Miracle II MTKĀ (CM2MTK) module


The steps below explain how to write read or reset the unlock code of a Mediatek (MTK) Smart Watch using Infinity Chinese Miracle II MTKĀ (CM2MTK) module

  1. Launch CM2MTK

    [Image: How-to-Read-Reset-Unlock-Code-of-a-Media...-MTK-1.jpg]

  2. Select the device's chipset under Settings > CPU (most smart watches usually use NOR / NAND memory but be sure to verify yours)

    [Image: How-to-Read-Reset-Unlock-Code-of-a-Media...-MTK-2.jpg]

  3. Click the UserData / Forensic tab

    [Image: How-to-Read-Reset-Unlock-Code-of-a-Media...-MTK-3.jpg]

  4. Tick the checkbox beside Read (if you want to remove the lock code entirely then do NOT tick the checkbox beside Read)

    [Image: How-to-Read-Reset-Unlock-Code-of-a-Media...-MTK-4.jpg]

  5. Click "Read User Codes" (if you didn't tick the check box beside Read then the button will be "Reset User Codes")

    [Image: How-to-Read-Reset-Unlock-Code-of-a-Media...-MTK-5.jpg]

  6. Once the tool shows Wait for phone..., power off the smart watch (with battery inserted and not holding any button) and connect to the PC via a USB cord
  7. The device should get detected, do not interrupt the process
  8. You should get a done message once the lock code has been found

    [Image: How-to-Read-Reset-Unlock-Code-of-a-Media...-MTK-6.jpg]

  9. Disconnect the device and power up to confirm

Important Notice