Hovatek Forum
[Tutorial] How to force Infinix X573, X608, X622 & X623 into EDL mode through test points - Printable Version

+- Hovatek Forum (https://forum.hovatek.com)
+-- Forum: HARDWARE (https://forum.hovatek.com/forum-42.html)
+--- Forum: Mobile phones and accesories (https://forum.hovatek.com/forum-43.html)
+--- Thread: [Tutorial] How to force Infinix X573, X608, X622 & X623 into EDL mode through test points (/thread-23298.html)



How to force Infinix X573, X608, X622 & X623 into EDL mode through test points - juvette - 06-28-2018

If you have been trying to get your Infinix Hot S3 or Infinix Hot 6 Pro or Infinix Hot 6X (Qualcomm Snapdragon) into Emergency Download or EDL mode (so you can bypass FRP or flash firmware) using button combo or even EDL cable then you must have noticed that it just doesn't work.

To force the phone into EDL mode, you need to disassemble it down to the board, join the two points in the image below using a thin piece of copper wire or tweezer / picker or any conducting material then connect the phone to the PC via USB cord.

Infinix Hot S3 X573 EDL test points

[Image: Infinix-Hot-S3-EDL-test-point.png]


Infinix Hot S3x X622 EDL test points

[Image: x622-hot-s3x-test-point.png]


Infinix Hot 6 Pro X608 EDL test points

[Image: Infinix-Hot-6-Pro-EDL-testpoint.png]


Infinix Hot 6X X623 EDL test points

[Image: X623-Test-Points.png]


Sent from my Infinix X510 using Hovatek Mobile


RE: How to force Infinix Hot S3 into EDL mode through test points - elasunuas - 08-08-2018

THANKS BRO
I JUST DID ONE NOW


INFINIX X573 PASSWORD AND FRP


Exe Version: NckBox Qualcomm Module 0.12
Operation: Reset FRP
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM76) detected.
Hello received.
HW ID: 00000000E1F00400 MSM8937
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8937
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 29.12 GB Partitions count: 49
[02DDDFDF]Userdata Size: 22.93 GB
Erasing FRP, wait.....
Erasing FRP, finished
Restarting phone.....
*********************************
Log saved: C:\Users\JESUS\Documents\NckBox\qc_module_Logs\reset_frp_MSM8937_00000000E1F00400_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F1.txt
Total Time: 00:00:03
Done.


RE: How to force Infinix Hot S3 & Hot 6 Pro into EDL mode through test points - terrybb - 01-06-2019

Do you by any means have videos on how to remove the back cover of infinix hot 6 pro to display the motherboard?


RE: How to force Infinix Hot S3 & Hot 6 Pro into EDL mode through test points - X3non - 01-07-2019

(01-06-2019, 01:04 PM)terrybb Wrote:  Do you by any means have videos on how to remove the back cover of infinix hot 6 pro to display the motherboard?

none ATM, best you have an experienced phone hardware repair technician assist you with loosening the back cover (i.e if you don't know how to)


RE: How to force Infinix X573, X608, X622 & X623 into EDL mode through test points - BaabaFadil - 04-28-2019

Thanks for the great Job @Hovatek, I salute u guys.
After opening my infinix x608, i find the photo above for the x608 is different from my motherboard layout as per attached link;
[ Login / Register to download free]


RE: How to force Infinix X573, X608, X622 & X623 into EDL mode through test points - X3non - 04-29-2019

(04-28-2019, 05:16 AM)BaabaFadil Wrote:  Thanks for the great Job @Hovatek, I salute u guys.
After opening my infinix x608, i find the photo above for the x608 is different from my motherboard layout as per attached link;
[ Login / Register to download free]

probably a clone phone and it might not even be qualcomm
if its the same one you posted @ https://forum.hovatek.com/thread-27574.html then its clearly a clone, you should stick to that thread


RE: How to force Infinix X573, X608, X622 & X623 into EDL mode through test points - healer12 - 06-14-2019

What does "join the two points" mean?, I'm still newbie in this kind so please enlighten me.


RE: How to force Infinix X573, X608, X622 & X623 into EDL mode through test points - X3non - 06-15-2019

(06-14-2019, 07:37 PM)healer12 Wrote:  What does "join the two points" mean?, I'm still newbie in this kind so please enlighten me.

you're to join both points as indicated in the picture using a thin piece of copper wire or tweezer or any conducting material will do


RE: How to force Infinix X573, X608, X622 & X623 into EDL mode through test points - dream41143 - 08-07-2019

After joining the point,is to flash it right. Am still a newbaby plz


RE: How to force Infinix X573, X608, X622 & X623 into EDL mode through test points - X3non - 08-07-2019

(08-07-2019, 05:35 AM)dream41143 Wrote:  After joining the point,is to flash it right. Am still a newbaby plz

depends on what you want to achieve, if you're trying to flash the phone then yes, after connecting the points then you flash