Hovatek Forum
Announcement: We've launched MTK Auto TWRP porter v1.4 and Android IMG unsign tool v1.0 (Mar, 2019)
ITEL 5020 DEAD AFTER FLASHING - Printable Version

+- Hovatek Forum (https://forum.hovatek.com)
+-- Forum: MOBILE PHONES HELP SECTION (https://forum.hovatek.com/forum-75.html)
+--- Forum: Feature Phone (https://forum.hovatek.com/forum-100.html)
+--- Thread: ITEL 5020 DEAD AFTER FLASHING (/thread-25261.html)



ITEL 5020 DEAD AFTER FLASHING - tubani - 10-09-2018

I flashed an Itel 5020 using miracle box. it finished writing but now it can't start, charge, or detect on the pc. I got the firmware from hovatek. pliz tell me where it went wrong. thanks.


RE: ITEL 5020 DEAD AFTER FLASHING - innagee - 10-09-2018

(10-09-2018, 07:44 PM)tubani Wrote:  I flashed an Itel 5020 using miracle box. it finished writing but now it can't start, charge, or detect on the pc. I got the firmware from hovatek. pliz tell me where it went wrong. thanks.

It's either a drained battery issue or a wrong firmware flashed.
What was wrong with the phone before flashing it?
Have you tried using a different battery or charging the battery for few hours?

Sent from my M5mini using Hovatek Mobile


RE: ITEL 5020 DEAD AFTER FLASHING - leeroym2 - 10-10-2018

for PC detection try the following:

1 update drivers ( VCOM & CDV)
2 plug in without battery and hold volume up key.


RE: ITEL 5020 DEAD AFTER FLASHING - EMMANUS - 10-10-2018

This is definitely a wrong firmware issue,so you have to get the right firmware and flash it.
Are you holding the boot key while connecting? Try left soft key, left soft key+green key, or * or # or 0 or center d-pad button


RE: ITEL 5020 DEAD AFTER FLASHING - tubani - 10-11-2018

(10-10-2018, 02:50 AM)EMMANUS Wrote:  This is definitely a wrong firmware issue,so you have to get the right firmware and flash it.
Are you holding the boot key while connecting? Try left soft key, left soft key+green key, or * or # or 0 or center d-pad button

Am I right in saying that it happened because I flashed with a pac file instead of a bin file. I read somewhere on the forum that to flash feature phones with miracle box you need to use a bin file


RE: ITEL 5020 DEAD AFTER FLASHING - EMMANUS - 10-12-2018

If what you have is a .pac file, you should flash it using research download tool


RE: ITEL 5020 DEAD AFTER FLASHING - hovatek - 10-12-2018

(10-11-2018, 09:53 PM)tubani Wrote:  Am I right in saying that it happened because I flashed with a pac file instead of a bin file. I read somewhere on the forum that to flash feature phones with miracle box you need to use a bin file

Its not about the file format rather about you flashing the firmware for your variant / build.
Have you tried removing and re-inserting the battery?