Hovatek Forum
Infinix x608 boots longer than usual after flash - Printable Version

+- Hovatek Forum (https://forum.hovatek.com)
+-- Forum: MOBILE PHONES HELP SECTION (https://forum.hovatek.com/forum-75.html)
+--- Forum: Android (https://forum.hovatek.com/forum-76.html)
+--- Thread: Infinix x608 boots longer than usual after flash (/thread-25420.html)



Infinix x608 boots longer than usual after flash - gentle52 - 10-22-2018

Pls sir I downloaded infinix x608 firmware the one ending with v13 the phone now boots with about 2 hours on every reboot..... Even after the first boot.... What should I do sir


RE: Infinix x608 boots longer than usual after flash - innagee - 10-22-2018

(10-22-2018, 08:41 PM)gentle52 Wrote:  Pls sir I downloaded infinix x608 firmware the one ending with v13 the phone now boots with about 2 hours on every reboot..... Even after the first boot.... What should I do sir

Have you tried factory resetting the phone via recovery mode?
Do you know your phone original build no. before flashing it?

Sent from my M5 mini using Hovatek Mobile


RE: Infinix x608 boots longer than usual after flash - EMMANUS - 10-24-2018

Can you remember how you flashed? The options you chose


RE: Infinix x608 boots longer than usual after flash - gentle52 - 10-25-2018

(10-22-2018, 10:42 PM)innagee Wrote:  
(10-22-2018, 08:41 PM)gentle52 Wrote:  Pls sir I downloaded infinix x608 firmware the one ending with v13 the phone now boots with about 2 hours on every reboot..... Even after the first boot.... What should I do sir

Have you tried factory resetting the phone via recovery mode?
Do you know your phone original build no. before flashing it?

Sent from my M5 mini using Hovatek Mobile

I have factory reset the phone still same fault takes more than 2 hours to boot

This is how the build number looks like before flashing
x608-ql1661abcdef-180604v15

I downloaded the file boot did phone refuse to book up. Then I downloaded the one ending with v13


RE: Infinix x608 boots longer than usual after flash - gentle52 - 10-25-2018

(10-24-2018, 11:14 AM)EMMANUS Wrote:  Can you remember how you flashed? The options you chose

Did choose any option just load the file through the normal procedure and I flashed.....


RE: Infinix x608 boots longer than usual after flash - X3non - 10-26-2018

(10-25-2018, 10:15 PM)gentle52 Wrote:  I have factory reset the phone still same fault takes more than 2 hours to boot

This is how the build number looks like before flashing
x608-ql1661abcdef-180604v15
I downloaded the file boot did phone refuse to book up. Then I downloaded the one ending with v13

i take it that you downloaded X608-QL1661ABCDEF-O-180604V15 from the list at https://forum.hovatek.com/thread-533.html
did you use UMT-QcFire dongle to flash the firmware?

also notice X608-QL1661ABCDEF-O is different from X608-QL1661D-O-IN
IN for the variant selling in the indian market
try flashing firmware for X608-QL1661ABCDEF-O-180406V11 and if it works then check if the phone is still running slow
lets know the outcome


RE: Infinix x608 boots longer than usual after flash - gentle52 - 10-26-2018

I did dot use umt-qcfire, I used Qualcomm flashtool
The problem now is that the phone now refuse to connect just only charging!

And I know the drivers are in tact


RE: Infinix x608 boots longer than usual after flash - innagee - 10-27-2018

(10-26-2018, 04:19 PM)gentle52 Wrote:  I did dot use umt-qcfire, I used Qualcomm flashtool
The problem now is that the phone now refuse to connect just only charging!

And I know the drivers are in tact

You will need to enter edl mode before the flash tool can detect the phone. Refer to https://forum.hovatek.com/thread-21791.html

Sent from my M5 mini using Hovatek Mobile