Hovatek Forum
[Tutorial] How to use NCK Box to write IMEI to Mediatek devices - Printable Version

+- Hovatek Forum (https://forum.hovatek.com)
+-- Forum: HARDWARE (https://forum.hovatek.com/forum-42.html)
+--- Forum: Boxes and Dongles (https://forum.hovatek.com/forum-111.html)
+--- Thread: [Tutorial] How to use NCK Box to write IMEI to Mediatek devices (/thread-26278.html)



How to use NCK Box to write IMEI to Mediatek devices - innagee - 01-02-2019

This guide will teach you how to use NCK Box to fix null IMEI / write IMEI to your Mediatek Android device. 

Requirements


Steps to writing IMEI on Mediatek using NCK Box


Follow the steps below to write IMEI to a Mediatek device using NCK Box

See the video below or @ https://youtu.be/M-e81fZwqqI

  1. Open NCK Module and Click on IMEI Utils

    [Image: how-to-write-imei-of-an-mtk-phone-using-nck-box-2.png]

  2. Under Phone settings, leave the first dropdown as 0-by-CPU

    [Image: how-to-format-single-partition-of-an-mtk...-nck-3.png]

  3. Select your phone's chipset (MTxxxx) from the second dropdown

    [Image: how-to-format-single-partition-of-an-mtk...-nck-4.png]

  4. Select which IMEI you will write, IMEI1 is for SIM 1 and IMEI 2 is for SIM2

    [Image: how-to-write-imei-of-an-mtk-phone-using-nck-box-3.png]

  5. Input your phone’s original IMEI written on a sticker at the back cover of your phone or under the battery

    [Image: how-to-write-imei-of-an-mtk-phone-using-nck-box-5.png]

  6. Set connection mode as Flash Connection

    [Image: how-to-write-imei-of-an-mtk-phone-using-nck-box-4.png]

  7. Click Repair IMEI

    [Image: how-to-write-imei-of-an-mtk-phone-using-nck-box-6.png]

  8. A confirmation box will pop up to notify you that after writing IMEI you will need to factory reset via recovery mode or factory mode before the written IMEI will take effect. Click Yes

    [Image: how-to-write-imei-of-an-mtk-phone-using-nck-box-7.png]

  9. You will see Please insert USB cable now.., power off the phone (still with battery in), don't hold any button then connect a USB cord from PC to Phone

    [Image: how-to-write-imei-of-an-mtk-phone-using-nck-box-8.png]

  10. You should see All Done

    [Image: how-to-write-imei-of-an-mtk-phone-using-nck-box-9.png]


Important Notice


RE: How to use NCK Box to write IMEI to Mediatek devices - Noblex - 02-14-2019

After inserting my phone via USB cord nothing was showing up


RE: How to use NCK Box to write IMEI to Mediatek devices - X3non - 02-14-2019

(02-14-2019, 06:08 AM)Noblex Wrote:  After inserting my phone via USB cord nothing was showing up

ensure your phone is a mediatek device and install vcom driver in the requirements section
if you still have problems, then create a new thread so we'll focus on it
see https://forum.hovatek.com/thread-514.html for how to create a thread