Hovatek Forum
[Please help] Please help me backup TECNO Camon X (CA7) firmware - Printable Version

+- Hovatek Forum (https://forum.hovatek.com)
+-- Forum: MOBILE PHONES HELP SECTION (https://forum.hovatek.com/forum-75.html)
+--- Forum: Android (https://forum.hovatek.com/forum-76.html)
+--- Thread: [Please help] Please help me backup TECNO Camon X (CA7) firmware (/thread-27679.html)

Pages: 1 2


Please help me backup TECNO Camon X (CA7) firmware - chabbzz07 - 10-05-2019

Hi. I have followed the steps provided by Hovatek to backup my phone's firmware, but while doing the readback, when I connect my phone, I get STATUS BROM CMD STARTCMD FAIL (0xC0060001) error. I need assistance getting past this part.


RE: Please help me backup TECNO Camon X (CA7) firmware - X3non - 11-05-2019

(10-05-2019, 03:28 PM)chabbzz07 Wrote:  Hi. I have followed the steps provided by Hovatek to backup my phone's firmware, but while doing the readback, when I connect my phone, I get STATUS BROM CMD STARTCMD FAIL (0xC0060001) error. I need assistance getting past this part.

did you use the DA file for your model while attempting to readback? tecno DA files are listed @ https://forum.hovatek.com/thread-23243.html


RE: Please help me backup TECNO Camon X (CA7) firmware - chabbzz07 - 11-05-2019

(11-05-2019, 09:28 AM)X3non Wrote:  
(10-05-2019, 03:28 PM)chabbzz07 Wrote:  Hi. I have followed the steps provided by Hovatek to backup my phone's firmware, but while doing the readback, when I connect my phone, I get STATUS BROM CMD STARTCMD FAIL (0xC0060001) error. I need assistance getting past this part.

did you use the DA file for your model while attempting to readback? tecno DA files are listed @ https://forum.hovatek.com/thread-23243.html
Yes, I did


RE: Please help me backup TECNO Camon X (CA7) firmware - chabbzz07 - 11-05-2019

(11-05-2019, 09:28 AM)X3non Wrote:  [quote='chabbzz07' pid='167516' dateline='1557498525']
Hi. I have followed the steps provided by Hovatek to backup my phone's firmware, but while doing the readback, when I connect my phone, I get STATUS BROM CMD STARTCMD FAIL (0xC0060001) error. I need assistance getting past this part.

did you use the DA file for your model while attempting to readback? tecno DA files are listed @ https://forum.hovatek.com/thread-23243.html


I tried using miracle box thunder edition. I'd select MTK then under service tab, I select Read. I tried both 8th boot(MT65xx & MT67xx/8127) and Boot(DA_SWSEC)(MT65xx & MT67xx), but once I connect the phone, Miracle Box shows >>Downloading Boot8 ..., the bar underneath shows 100% and my phone boots up just as soon as I connect it. Is the phone supposed to boot up?


Please help me backup TECNO Camon X (CA7) firmware - innagee - 12-05-2019

(11-05-2019, 04:09 PM)chabbzz07 Wrote:  
(11-05-2019, 09:28 AM)X3non Wrote:  [quote='chabbzz07' pid='167516' dateline='1557498525']
Hi. I have followed the steps provided by Hovatek to backup my phone's firmware, but while doing the readback, when I connect my phone, I get STATUS BROM CMD STARTCMD FAIL (0xC0060001) error. I need assistance getting past this part.

did you use the DA file for your model while attempting to readback? tecno DA files are listed @ https://forum.hovatek.com/thread-23243.html


I tried using miracle box thunder edition. I'd select MTK then under service tab, I select Read. I tried both 8th boot(MT65xx & MT67xx/8127) and Boot(DA_SWSEC)(MT65xx & MT67xx), but once I connect the phone, Miracle Box shows >>Downloading Boot8 ..., the bar underneath shows 100% and my phone boots up just as soon as I connect it. Is the phone supposed to boot up?

No, it should not boot up.
Try holding the vol down key before connecting the phone to pc.


RE: Please help me backup TECNO Camon X (CA7) firmware - chabbzz07 - 12-05-2019

(12-05-2019, 12:59 AM)innagee Wrote:  
(11-05-2019, 04:09 PM)chabbzz07 Wrote:  
(11-05-2019, 09:28 AM)X3non Wrote:  
(10-05-2019, 03:28 PM)chabbzz07 Wrote:  Hi. I have followed the steps provided by Hovatek to backup my phone's firmware, but while doing the readback, when I connect my phone, I get STATUS BROM CMD STARTCMD FAIL (0xC0060001) error. I need assistance getting past this part.

did you use the DA file for your model while attempting to readback? tecno DA files are listed @ https://forum.hovatek.com/thread-23243.html


I tried using miracle box thunder edition. I'd select MTK then under service tab, I select Read. I tried both 8th boot(MT65xx & MT67xx/8127) and Boot(DA_SWSEC)(MT65xx & MT67xx), but once I connect the phone, Miracle Box shows  >>Downloading Boot8 ..., the bar underneath shows 100% and my phone boots up just as soon as I connect it. Is the phone supposed to boot up?

No, it should not boot up.
Try holding the vol down key before connecting the phone to pc.
Hi. I have tried miracle box while holding the volume down key. The phone would still boot up. I attempted with the volume up key and this is the message it gave>>The Boot not support the Phone, or CPU Bad. Select other Boot. I have tried the two available Boot options that match my phone with no success.


RE: Please help me backup TECNO Camon X (CA7) firmware - chabbzz07 - 12-05-2019

(11-05-2019, 09:28 AM)X3non Wrote:  
(10-05-2019, 03:28 PM)chabbzz07 Wrote:  Hi. I have followed the steps provided by Hovatek to backup my phone's firmware, but while doing the readback, when I connect my phone, I get STATUS BROM CMD STARTCMD FAIL (0xC0060001) error. I need assistance getting past this part.

did you use the DA file for your model while attempting to readback? tecno DA files are listed @ https://forum.hovatek.com/thread-23243.html
I tried SP flash tool for readback, this time while holding down the volume up key, this time I got BROM CMD error, like the phone tried to boot up before the process could commence.


RE: Please help me backup TECNO Camon X (CA7) firmware - FANWELL ZULU - 12-05-2019

I HAVE A TECNO W3 I RESET IT NOW IT REQUIRES GOOGLE ACCOUNT NEED HELP ON THIS ONE PLZ


Please help me backup TECNO Camon X (CA7) firmware - innagee - 12-05-2019

(12-05-2019, 08:10 AM)FANWELL ZULU Wrote:  I HAVE A TECNO W3 I RESET IT NOW IT REQUIRES GOOGLE ACCOUNT NEED HELP ON THIS ONE PLZ

Please create a new thread, this is someone else’s support thread.
See https://forum.hovatek.com/thread-514.html for how to create.


RE: Please help me backup TECNO Camon X (CA7) firmware - innagee - 12-05-2019

(12-05-2019, 06:33 AM)chabbzz07 Wrote:  
(11-05-2019, 09:28 AM)X3non Wrote:  
(10-05-2019, 03:28 PM)chabbzz07 Wrote:  Hi. I have followed the steps provided by Hovatek to backup my phone's firmware, but while doing the readback, when I connect my phone, I get STATUS BROM CMD STARTCMD FAIL (0xC0060001) error. I need assistance getting past this part.

did you use the DA file for your model while attempting to readback? tecno DA files are listed @ https://forum.hovatek.com/thread-23243.html
I tried SP flash tool for readback, this time while holding down the volume up key, this time I got BROM CMD error, like the phone tried to boot up before the process could commence.

Have you tried the vol down key?
Also,did you use the DA for your phone model?
tecno DA files are listed @ https://forum.hovatek.com/thread-23243.html