Hovatek Forum
[Please help] Infinix Hot 3 (x554 16+1 A2) refuse to accept flash. - Printable Version

+- Hovatek Forum (https://forum.hovatek.com)
+-- Forum: MOBILE PHONES HELP SECTION (https://forum.hovatek.com/forum-75.html)
+--- Forum: Android (https://forum.hovatek.com/forum-76.html)
+--- Thread: [Please help] Infinix Hot 3 (x554 16+1 A2) refuse to accept flash. (/thread-28276.html)

Pages: 1 2 3 4


RE: Infinix Hot 3 (x554 16+1 A2) refuse to accept flash. - mrlone1997 - 18-07-2019

(18-07-2019, 09:46 AM)freshtyt Wrote:  
(17-07-2019, 06:37 PM)mrlone1997 Wrote:  Hi, i found the feature "write memory" but unfortunately the same nightmare.
It just stuck and after 51 seconds it gives an error.
See attachment below..

your file path should point to the file you're trying to write e.g recovery.img and not scatter file
if you're writing recovery then the begin address will be the start address for that recovery partition in the scatter file
okay i think i now fully understand what you were trying to tell. Meaning the 'write memory' option is used to flash individual partitions of the phone, instead i thought it function is to re-write the emmc partition of the phone.

I will try that too. thanks


RE: Infinix Hot 3 (x554 16+1 A2) refuse to accept flash. - freshtyt - 19-07-2019

(18-07-2019, 05:58 PM)mrlone1997 Wrote:  okay i think i now fully understand what you were trying to tell. Meaning the 'write memory' option is used to flash individual partitions of the phone, instead i thought it function is to re-write the emmc partition of the phone.

I will try that too. thanks

try and post feedback


RE: Infinix Hot 3 (x554 16+1 A2) refuse to accept flash. - mrlone1997 - 24-07-2019

Hi everyone, sorry it took me a while to report back.
Please careful see attachment below for an advice on my next move.

Sadly it did not work or did  not succeed in writing memory to the phone.
I tried writing both the .img and .bin (preloader) files but all failed. 
But when i tried memory test i found an interesting result which i have little idea about.


RE: Infinix Hot 3 (x554 16+1 A2) refuse to accept flash. - X3non - 24-07-2019

(24-07-2019, 01:33 PM)mrlone1997 Wrote:  Hi everyone, sorry it took me a while to report back.
Please careful see attachment below for an advice on my next move.

Sadly it did not work or did  not succeed in writing memory to the phone.
I tried writing both the .img and .bin (preloader) files but all failed. 
But when i tried memory test i found an interesting result which i have little idea about.

the results in memory tells your device uses emmc and not nand or ufs storage
from all indications, the emmc chip is faulty. you should consider checking and changing the emmc chip


RE: Infinix Hot 3 (x554 16+1 A2) refuse to accept flash. - mrlone1997 - 26-07-2019

(24-07-2019, 09:52 PM)X3non Wrote:  
(24-07-2019, 01:33 PM)mrlone1997 Wrote:  Hi everyone, sorry it took me a while to report back.
Please careful see attachment below for an advice on my next move.

Sadly it did not work or did  not succeed in writing memory to the phone.
I tried writing both the .img and .bin (preloader) files but all failed. 
But when i tried memory test i found an interesting result which i have little idea about.

the results in memory tells your device uses emmc and not nand or ufs storage
from all indications, the emmc chip is faulty. you should consider checking and changing the emmc chip
I will be Glad to test that solution ..but please i will still need your assistance with that one too.

Below is an attachment of my phone's pcb board kindly show me which component is the emmc that needs replacing.


RE: Infinix Hot 3 (x554 16+1 A2) refuse to accept flash. - X3non - 27-07-2019

(26-07-2019, 11:26 PM)mrlone1997 Wrote:  I will be Glad to test that solution ..but please i will still need your assistance with that one too.

Below is an attachment of my phone's pcb board kindly show me which component is the emmc that needs replacing.

take your phone to an experienced phone hardware repair technician


RE: Infinix Hot 3 (x554 16+1 A2) refuse to accept flash. - mrlone1997 - 28-07-2019

(27-07-2019, 10:50 AM)X3non Wrote:  
(26-07-2019, 11:26 PM)mrlone1997 Wrote:  I will be Glad to test that solution ..but please i will still need your assistance with that one too.

Below is an attachment of my phone's pcb board kindly show me which component is the emmc that needs replacing.

take your phone to an experienced phone hardware repair technician
I understand and thank you greatly for your time and effort towards this thread.
And to anyone who contributed Smile