Hovatek Forum
X623 sensors not working after flashing firmware - Printable Version

+- Hovatek Forum (https://forum.hovatek.com)
+-- Forum: MOBILE PHONES HELP SECTION (https://forum.hovatek.com/forum-75.html)
+--- Forum: Android (https://forum.hovatek.com/forum-76.html)
+--- Thread: X623 sensors not working after flashing firmware (/thread-29579.html)

Pages: 1 2 3


RE: X623 sensors not working after flashing firmware - hovatek - 24-08-2019

(20-08-2019, 09:50 PM)jagzz Wrote:  I've flashed all the firmwares provide here and updated the firmware up to the latest ota updated release, the sensors are still not working, I'm wondering if its possible to access the MMI app interface cuz i think its responsible for the sensor calibration

Sent from my Infinix X623 using Hovatek Mobile

Which tool did you flash these firmware with? HQXA @ https://forum.hovatek.com/thread-26553.html ?


RE: X623 sensors not working after flashing firmware - jagzz - 06-11-2019

So after a while doing some research I think the problem of the sensors is related to a corrupted persist.img which carries the config for the sensors . my question is if it is persist.img that has a problem is there a way of getting a working persist.img, flashing it without loosing data


RE: X623 sensors not working after flashing firmware - X3non - 07-11-2019

(06-11-2019, 11:06 PM)jagzz Wrote:  So after a while doing some research I think the problem of the sensors is related to a corrupted persist.img which carries the config for the sensors . my question is if it is persist.img that has a problem is there a way of getting a working persist.img, flashing it without loosing data

only by backing up from another X623 device without this problem, you should include modem, modemst1 and modemst2 as well
you can backup firmware using miracle thunder @ https://forum.hovatek.com/thread-25452.html ; during backup ensure to include modem, modemst1, modemst2 and persist partitions


RE: X623 sensors not working after erasing and flashing firmware with HQXA - Godwillazuka - 07-11-2019

[quote pid='175943' dateline='1566041139']
Pls how did you manage to fix ur sensors problem after flashing ur phone that you complained here about. Because am having same issue after flashing my phone. Pls oh 
[/quote]


RE: X623 sensors not working after flashing firmware - jagzz - 07-11-2019

Ok so I just did a full backup of another x623 without the sensor issues. The modem, modemst1, modemst2 and the persist partition all included.what do I do now, how do I flash the persist to my phone


RE: X623 sensors not working after flashing firmware - X3non - 08-11-2019

(07-11-2019, 03:07 PM)jagzz Wrote:  Ok so I just did a full backup of another x623 without the sensor issues. The modem, modemst1, modemst2 and the persist partition all included.what do I do now, how do I flash the persist to my phone

same procedure you used to make the backup; see https://forum.hovatek.com/thread-25452.html ; at step 11 untick all partitions leaving out the above mentioned 4 then step 12 select write selected then proceed
OR flash the 4 files using the guide @ https://forum.hovatek.com/thread-26213.html or https://forum.hovatek.com/thread-25473.html


RE: X623 sensors not working after flashing firmware - Godwillazuka - 09-11-2019

(07-11-2019, 03:07 PM)jagzz Wrote:  Ok so I just did a full backup of another x623 without the sensor issues. The modem, modemst1, modemst2 and the persist partition all included.what do I do now, how do I flash the persist to my phone
Pls sir were you able to fix the sensor issue


RE: X623 sensors not working after flashing firmware - jagzz - 11-11-2019

Tried it and still nothing sensors still not working


RE: X623 sensors not working after flashing firmware - freshtyt - 11-11-2019

(11-11-2019, 02:43 PM)jagzz Wrote:  Tried it and still nothing sensors still not working

can you explain what exactly you tried and the outcome?


RE: X623 sensors not working after flashing firmware - Godwillazuka - 12-11-2019

(11-11-2019, 04:51 PM)freshtyt Wrote:  
(11-11-2019, 02:43 PM)jagzz Wrote:  Tried it and still nothing sensors still not working

can you explain what exactly you tried and the outcome?

Hmmmmm Jesus I thought it work oh.
But his did you do it that it did not work