Hovatek Forum
[Please help] HOLD MI Q02 connection with windows PC - Printable Version

+- Hovatek Forum (https://forum.hovatek.com)
+-- Forum: MOBILE PHONES HELP SECTION (https://forum.hovatek.com/forum-75.html)
+--- Forum: Wearables And Accessories (https://forum.hovatek.com/forum-99.html)
+--- Thread: [Please help] HOLD MI Q02 connection with windows PC (/thread-29647.html)

Pages: 1 2


RE: HOLD MI Q02 connection with windows PC - mozakca - 30-08-2019

(30-08-2019, 01:34 AM)freshtyt Wrote:  
(29-08-2019, 12:27 AM)mozakca Wrote:  ...>>BootLoad Error. ID: 19

when the device is power on, its still detected on device manager correctly? try writing imei while the device is switched on
then also try while switched off but hold the hardware button once you connect the device to the PC then you click the start button to perform the operation

actually it doesn't see the device correctly because of drivers(please see picture). Therefore it doesn't do anything when power is on.

On the other hand with the trick you mentioned, I got one of the following errors:
CPU    type: Coolsand (809C8002)
  Flash  type: NOR
  Flash Model: flsh_spi32m
  Flash  Size: 0x400000(4,0M)
  Being analyzed,Wait...
  Loading the boot,Wait..
>>BootLoad Error. ID: 19

or

Definition Applied
  Connecting to Phone,Wait..
  Connect to Mobile phone error. ID: 200

Thank you for your interest again...


RE: HOLD MI Q02 connection with windows PC - freshtyt - 31-08-2019

(30-08-2019, 11:28 PM)mozakca Wrote:  ...On the other hand with the trick you mentioned, I got one of the following errors:
CPU    type: Coolsand (809C8002)
  Flash  type: NOR
  Flash Model: flsh_spi32m
  Flash  Size: 0x400000(4,0M)
  Being analyzed,Wait...
  Loading the boot,Wait..
>>BootLoad Error. ID: 19

...

you'll need to try writing imei using latest version with the miracle dongle, maybe that'll work instead