Hovatek Forum
[Downloads] Tecno Pouvoir 3 Air LC6 / LC6a Stock ROM / Firmware and Component Files - Printable Version

+- Hovatek Forum (https://forum.hovatek.com)
+-- Forum: FIRMWARE / OS / TOOLS DOWNLOADS (https://forum.hovatek.com/forum-88.html)
+--- Forum: Android Firmware Individual Files (https://forum.hovatek.com/forum-105.html)
+---- Forum: Tecno (https://forum.hovatek.com/forum-106.html)
+---- Thread: [Downloads] Tecno Pouvoir 3 Air LC6 / LC6a Stock ROM / Firmware and Component Files (/thread-29785.html)



Tecno Pouvoir 3 Air LC6 / LC6a Stock ROM / Firmware and Component Files - X3non - 28-08-2019

Below is a collection of download links for files you would find in the flash file, firmware or stock rom for Tecno Pouvoir 3 Air LC6 / LC6a. Its for those who need specific files and don't want to have to download the entire stock ROM / Firmware. If what you need is the complete stock ROM / Firmware then you can find the download link below also

Download Tecno Pouvoir 3 Air LC6 / LC6a stock rom / firmware below



Tecno Pouvoir 3 Air LC6 (LC6-H617CDE-PGo-190802V245) [Factory / Signed]


Tecno Pouvoir 3 Air LC6a (LC6a-H619ABC-PGo-191121V109) [Factory / Signed]



How to flash / unbrick a Tecno Pouvoir 3 Air LC6 / LC6a


If you have trouble flashing then get the custom Tecno Download Agent (DA) file for this model
The firmware above is in scatter format so this means you can flash with SP Flash tool, Infinity Chinese Miracle II MTK Box,
Miracle Box (If indicated that it's a Miracle Box Dump) or any other Chinese box or tool which supports flashing in scatter format.
Before flashing, ensure that:

Tecno Pouvoir 3 Air LC6 / LC6a Core Specification




RE: Tecno Pouvoir 3 Air LC6 Stock ROM / Firmware and Component Files - frankuba46 - 05-09-2019

[quote pid='176867' dateline='1566983863']
this firmware says verified boot enabled 
ERROR: STATUS_SEC_IMG_TYPE_MISMATCH(0xC002002A)
[/quote]


RE: Tecno Pouvoir 3 Air LC6 Stock ROM / Firmware and Component Files - X3non - 05-09-2019

(05-09-2019, 05:14 AM)frankuba46 Wrote:  this firmware says verified boot enabled 
ERROR: STATUS_SEC_IMG_TYPE_MISMATCH(0xC002002A)

create a new thread for your device issue by clicking "Ask Question" at the top
in the new thread, attach a full screenshot of the error message also state whats wrong with the device and how the problem began


RE: Tecno Pouvoir 3 Air LC6 Stock ROM / Firmware and Component Files - Tanko1 - 04-11-2019

Pouvior 3 plus firmware needed please thanks the admin.


RE: Tecno Pouvoir 3 Air LC6 Stock ROM / Firmware and Component Files - X3non - 04-11-2019

(04-11-2019, 02:05 PM)Tanko1 Wrote:  Pouvior 3 plus firmware needed please thanks the admin.

it'll be listed @ https://forum.hovatek.com/thread-311.html once it's available
create a new thread for your device issue by clicking "Ask Question" at the top then post


RE: Tecno Pouvoir 3 Air LC6 / LC6a Stock ROM / Firmware and Component Files - probouce - 16-01-2020

How to remove frp on Tecno LC6a with InfinityBox_install_CM2MT2_v2.06

download the update of Cm2Dongle from the server http://dl1.infinity-box.com/00/pub.php?dir=software/archive/CM2/&uid=18278&file=InfinityBox_install_CM2MT2_v2.06.7z
Next install your setup then open it then select DA file @ https://forum.hovatek.com/thread-23243.html
And finally remove the frp.
I show you the parameters from my Dongle.

Code:
Card found : F10A0A2D , v0137
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.06

Load IDBase v123080 


Operation : Identify [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM28)
MODE : PRELOADER PORT
PORT : 28
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
    CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
    TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : PRELOADER PORT
MODE : 0_base :  | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
    BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
    DA : AGENT started!
DA : SYNC
    DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0x40000000 [ 1,00 GB ]

        EMMC: 150100464536324D4203DD0D70B6673
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
        EMMC:
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB  : 0x00400000 [ 4,00 MB ]
              USER  : 0x3A3E00000 [ 14,56 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : ED73197841B8AC16A2C5C3C6A4F993C8

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : PPR1.180610.011
Display ID    : LC6a-H619ABC-PGo-190820V85
Ver. CodeName  : REL
Ver. Release  : 9
Sec. Patch    : 2019-08-05
Build Time    : 156624xxxxxx
Product Model  : TECNO LC6a
Product Brand  : TECNO
Product Name  : H619
Product Device : TECNO-LC6a
Product Manfct : TECNO MOBILE LIMITED
Product Info  : lc6_h617
Product Board  : TECNO-LC6a
Board Platform : mt6761

USERDATA : ENCRYPTED


Done!
Elapsed: 00:00:48

Operation : Reset Settings/Format FS [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM28)
MODE : PRELOADER PORT
PORT : 28
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
    CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
    TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : PRELOADER PORT
MODE : 0_base :  | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
    BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
    DA : AGENT started!
DA : SYNC
    DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0x40000000 [ 1,00 GB ]

        EMMC: 150100464536324D4203DD0D70B6673
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
        EMMC:
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB  : 0x00400000 [ 4,00 MB ]
              USER  : 0x3A3E00000 [ 14,56 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : ED73197841B8AC16A2C5C3C6A4F993C8

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:46

Reconnect Power/Cable!

Operation : Read Firmware [ v2.06 ]



RE: Tecno Pouvoir 3 Air LC6 / LC6a Stock ROM / Firmware and Component Files - PiusBrass - 07-08-2020

Tried Flashing This firmware using CM2MT2 this is the error it showed.
Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000009B00000
Erase : 0x000000000DB00000 : 0x0000000081500000
Erase : 0x0000000093000000 : 0x000000000A300000
Erase : 0x000000009D600000 : 0x0000000003680000
Erase : 0x00000000A2C80000 : 0x00000000C4380000

[FL] : RePartition
[FL] : RePartition Ok!


[FL] : Flashing now ...

Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : MD1IMG
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : DTBO
ERR : 0xC002002A
ERR : SEC : IMG TYPE MISMATCH
ERR : 0x00800000|0x00800000

Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!

Reconnect Power/Cable!