Hovatek Forum DEVELOPMENT Android [Tutorial] HOW TO ROOT , INSTALL CLOCKWORK MOD 6 AND FLASHING CYANOGENMOD 10.1 ON HUAWEI FUSION
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Tutorial] HOW TO ROOT , INSTALL CLOCKWORK MOD 6 AND FLASHING CYANOGENMOD 10.1 ON HUAWEI FUSION

[Tutorial] HOW TO ROOT , INSTALL CLOCKWORK MOD 6 AND FLASHING CYANOGENMOD 10.1 ON HUAWEI FUSION

ALBA
ALBA
ALBA
Senior Member
550
09-07-2016, 03:53 PM
#1



Download everything here and follow the guidelines or follow the guidelines on my blogspot.


http://stanleykwao.blogspot.com/2015/03/...0.html?m=1



1. ROOTING GUIDE:
1. Download And Install Baidu Root And Superuser:
Download Baid Root Apk Here

Download SuperUser Here

2. Open Baidu Root And Tap The Blue Spot And wait For It To Finish It Proceeding. After It Has Finished Rooting You Will See The Blue Spot Change To Green.
Now You Have Root Your Fusion 2 U8665.

2. INSTALLING CLOCKWORK MOD 6 ON FUSION 2 U8665:
1.Download The cwm Recovery Tool File:
Download cwm File Here

2. Put Your Fusion 2 Into Fastboot Mode.By turning off your phone And remove battery then re-inset it back again.

3. Now Hold the power and the Volume down key together about 20 seconds . You will see that the phone has freeze at the AT&T Logo .. Nice ,That is Fastboot.

4. Now Extract  CWM Recovery Tool File On your PC And Open the Extracted file And Run "Instalador.bat" And plug in you phone and wait for your computer to recognize your phone.

5. Now that your phone has been recognize by the PC and your Italador.bat is still Runig ,Hit The space Bar on Your PC.It will say something about sending recovery Image"in Spanish sorry"If you still stuck at logo,it means the computer has not recognize your device. Remove the USB and re-inset it . Now hit the space bar . After some 4 seconds Your phone will automatically restart by It Own.Now we Want to check that CWM is Installed.

6. Pull out The battery And put it back . Now Hold the volume up and power together for some seconds . You will see some fancy cap with some golden shining around it. Now you have Installed CWM.

3. MAKE BACKUP OF YOUR CURRENT ROM:

1. Turn off Your Phone.

2. Press the power and Volume up till you boot to Recovery mod.

3.Select Backup and Restore by using the Volume Keys  and the Power button to Select the option "Backup and Restore.

4. Select Backup and let CWM do it's magic. Once it say's "Backup Complete" Select "Reboot System Now

5. Once the system reboots you should now be totally backed up

4. MAKE A BACKUP OF YOUR IMEI ( YOUR 3G):

1. Download And Install toolBox5irom.Apk

Download Apk Here

2.Open it And Click Backup to make a complete Backup of  Your 3G.

NOTE: Keep The imei and the toolbox5irom.apk on your Computer Or Sdcard .. Do not DELETE IT. Keep it if in Case you lost your 3G Network.You Can Restore it Back again.

5. FLASHING CYANOGENMOD 10.1 ON FUSION 2 U8665 OR PACMAN.ZIP. DONT DOWNLOAD THE TWO . DOWNLOAD ONLY ONE YOU WISH TO FLASH.

1. Download cm-10.1-20130602-Nightly-u8665.zip Or Pacman.zip.
Download Cyanogenmod Here

Download Pacman.zip Here

Thanks To CYANOGEN and PACMAN For this Useful ROM'S.

Download ICS Baseband.zip and Gapps. In other to get your ICS Baseband.zip , Download Stock_Android_ICS.zip And Extract it And Open The Extracted Folder to Copy Your ICS BASEBAND.ZIP

Download Stock_Androd.zip Here

Download Gapps Here


2. After you have Download And perform All the above Instructions,Copy The CYANOGENMOD.zip Or PACMAN.zip , ICS BASEBAND.zip And GAPPS.zip into The Root of Your Sdcard. Do not Put them in Any folder Just Drop them in The Sdcard.

3. Now Off your phone And  Boot it to Recovery Mod by pressing The Power and Up Volume key together.

4. Used The Volume keys , move to " Mounts and Storage,press the Power buttom to select.

5. Navigate to "Format/System", Press power Buttom to select.

6. Navigate to " Go Back" press power bottom to select.

7. Navigate to "wip data/factory reset" press power key to select.

8. Go to "Formating Cache partition" press power key to select.

9. Go to "Delvik Cache" press Power key to Select.

10.Now navigate to "Install zip from Sdcard" press The Power key to select.

11. Navigate to "ICS BASEBAND. ZIP" press power buttom to select.

12.Navigate to "cm-10.1-2013060-Nightly-u8665.zip" press the power key to select.

13. Navigate to "Gapps.zip" and press power key to select.

14. Navigate to "Reboot System Now" and press the Power key to Select. It will Take while for the Phone to boot. And it May bootloop 1 - 2 times . Wait for the phone to Boot well and it will take 1 - 3 minutes to Boot well.

15. Now you have successful Flash a New ROM on Your phone.
This post was last modified: 09-07-2016, 03:57 PM by ALBA.
Attached Files
.jpg
Screenshoots.jpg
Size: 25.33 KB / Downloads: 1
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram