[Please help] Zopo zp980+ very strange brick , driving me crazy
[Please help] Zopo zp980+ very strange brick , driving me crazy
(24-07-2016, 12:35 PM)hovatek(23-07-2016, 02:36 PM)Brainbooster no, because the soft-reboot doesn't really shutdown the phone, they are two different kinds of reboot , the soft-reboot I'm talking about is the one provided by xposed / gravity box
What I'm asking you to do is compare the outcome of the default reboot function that comes with your phone and the soft reboot module you're using
(25-07-2016, 12:05 PM)Brainbooster i'm starting to think the problem is inside lk.bin....
just think about all the strange things the phone does ..they basically all happens when the phone if off rather than while I'm using it , so I think it's the little kernel doing something wrong or getting into an indefinite state .
also when I put the phone on charge when it's off , the charging animation doesn't appear as soon as I connect the cable but it takes a variable random time..
I think lk is thsoftware which controls all those functions so I would restrict the possible fault cause to that area
what do you think about my theory?
(25-07-2016, 03:07 PM)hovatek(25-07-2016, 12:05 PM)Brainbooster i'm starting to think the problem is inside lk.bin....
just think about all the strange things the phone does ..they basically all happens when the phone if off rather than while I'm using it , so I think it's the little kernel doing something wrong or getting into an indefinite state .
also when I put the phone on charge when it's off , the charging animation doesn't appear as soon as I connect the cable but it takes a variable random time..
I think lk is thsoftware which controls all those functions so I would restrict the possible fault cause to that area
what do you think about my theory?
i'm also suspecting preloader and lk .bin
(25-07-2016, 06:12 PM)mensa Yes, uboot, preloader and boot. There is no coordination between them. Most especially the uboot or ik which facilitates that. When you restart the phone, it is not a complete switch off so the work starts on uboot which then is aided by boot, then logo brings itself: then boot takes it again to switch on. I really don't see coordination between these partitions. Maybe a deformity.
Sent from my Infinix-X600 using Hovatek mobile
(26-07-2016, 10:49 AM)Brainbooster I'm planning to build a serial data cable in order to catch the early init kernel messages, it will also power the phone the way I can see everything from the beginning
(26-07-2016, 11:21 AM)mensa(26-07-2016, 10:49 AM)Brainbooster I'm planning to build a serial data cable in order to catch the early init kernel messages, it will also power the phone the way I can see everything from the beginning
Okay try that and let's see what happens. Is this happening on a stock or custom Rom?
Sent from my Infinix-X600 using Hovatek mobile
(26-07-2016, 01:32 PM)Brainbooster yes , with all the stock roms I tested .
now I really want to understand why this happens , moreover I saw it working normally for half an hour before it shutdown (my fault, i overheated it ) and started behave strange again , so I know it can work normally cause I saw it rebooting, shutting down and powering on normally with my eyes
(26-07-2016, 01:47 PM)mensa(26-07-2016, 01:32 PM)Brainbooster yes , with all the stock roms I tested .
now I really want to understand why this happens , moreover I saw it working normally for half an hour before it shutdown (my fault, i overheated it ) and started behave strange again , so I know it can work normally cause I saw it rebooting, shutting down and powering on normally with my eyes
Then I believe is not a problem to call for alarm. Then is basically because of overheat or over usage of the phone. I want to know, how did you over-heat it?
Sent from my Infinix-X600 using Hovatek mobile