[MedoFoda]

i have this phone huawei y600-u20 and is totally dead. it wont charge and see the icon or power it on. it will just vibrates and no more.

i formatted it using sp flash tool.and flashe it . it is said "ok" and so i close the sp flash tool and disconnect the cable from the computer. when i start to turn it, it wont. i tried to charge it using computer and still not.
how can i fix this? please help me. 

[matybazz]

i have this phone huawei y600-u20 and is totally dead. it wont charge and see the icon or power it on. it will just vibrates and no more.

i formatted it using sp flash tool.and flashe it . it is said "ok" and so i close the sp flash tool and disconnect the cable from the computer. when i start to turn it, it wont. i tried to charge it using computer and still not.
how can i fix this? please help me. 

Seems like your eMMC chip is bad.
Needs to be replaced
How did it really start?

[MedoFoda]

i have this phone huawei y600-u20 and is totally dead. it wont charge and see the icon or power it on. it will just vibrates and no more.

i formatted it using sp flash tool.and flashe it . it is said "ok" and so i close the sp flash tool and disconnect the cable from the computer. when i start to turn it, it wont. i tried to charge it using computer and still not.
how can i fix this? please help me. 

Seems like your eMMC chip is bad.
Needs to be replaced
How did it really start?

It Start After Flashe Y600-U20V100R001C435B012_DCC  I did Formt Whole flashe and download firmware ( Format all + download) and then mobile is gone just vibrate on power on

[matybazz]

It Start After Flashe Y600-U20V100R001C435B012_DCC  I did Formt Whole flashe and download firmware ( Format all + download) and then mobile is gone just vibrate on power on

You will need to have your eMMC chip replaced take it to a hardware store

[MedoFoda]

It Start After Flashe Y600-U20V100R001C435B012_DCC  I did Formt Whole flashe and download firmware ( Format all + download) and then mobile is gone just vibrate on power on

You will need to have your eMMC chip replaced take it to a hardware store

thnx and i will go to huawei hardware store

[hovatek]

i have this phone huawei y600-u20 and is totally dead. it wont charge and see the icon or power it on. it will just vibrates and no more.

i formatted it using sp flash tool.and flashe it . it is said "ok" and so i close the sp flash tool and disconnect the cable from the computer. when i start to turn it, it wont. i tried to charge it using computer and still not.
how can i fix this? please help me. 

Seems like you'll need to try a different firmware.
Where did you download the firmware you flashed

[MedoFoda]

i have this phone huawei y600-u20 and is totally dead. it wont charge and see the icon or power it on. it will just vibrates and no more.

i formatted it using sp flash tool.and flashe it . it is said "ok" and so i close the sp flash tool and disconnect the cable from the computer. when i start to turn it, it wont. i tried to charge it using computer and still not.
how can i fix this? please help me. 

Seems like you'll need to try a different firmware.
Where did you download the firmware you flashed

My eMMC chip Is good
And i try 
Y600-U20V100R001C435B018
Y600-U20 V100R001C435B01
Y600-U20V100R001C435B012
None of them work what can i do

[hovatek]

My eMMC chip Is good
And i try 
Y600-U20V100R001C435B018
Y600-U20 V100R001C435B01
Y600-U20V100R001C435B012
None of them work what can i do

1. Were you able to successfully flash the above firmware?
2. Have you tried taking out the battery and charging it?

[MedoFoda]

My eMMC chip Is good
And i try 
Y600-U20V100R001C435B018
Y600-U20 V100R001C435B01
Y600-U20V100R001C435B012
None of them work what can i do

1. Were you able to successfully flash the above firmware?
2. Have you tried taking out the battery and charging it?

all of them successfully done 
and i try with new battery  nothing change
but there is something i didn't till in first time flash .... i format whole flash and mark validation and use this  firmware Y600-U20V100R001C435B018

[hovatek]

all of them successfully done 
and i try with new battery  nothing change
but there is something i didn't till in first time flash .... i format whole flash and mark validation and use this  firmware Y600-U20V100R001C435B018

When you pressed the power button, did it vibrate just once or continually?