Huawei 302HW blinking led error
Huawei 302HW blinking led error
(10-04-2017, 10:30 AM)Kenneth.mtika i gat this Huawei 302HW, i biliv its huawei P6.. Single sim, with a micro sd card slot ofcos.. It got stollen, after i recovered it, its just showing blinking led, 1 red, then 2 green.. Even if i disconnect the battery, its behaving the same way... Tried to reflash it with huawei update multiloader tool, but the com port is not listed ... I installed the neccessary drivers, the drivers were installed propery, in device manager its listed "Huawei usb com 1.0" under ports, but flashtool is failing to recognise it... What could be the problem? Help...
Sent from my TECNO-Y5S using the Hovatek Forum App
(11-04-2017, 12:44 PM)Kenneth.mtika Red>green>green>red>green>green>red>green>green>red>green>green>red>green>green.
Sent from my TECNO-Y5S using the Hovatek Forum App
(12-04-2017, 10:00 AM)hovatek(11-04-2017, 12:44 PM)Kenneth.mtika Red>green>green>red>green>green>red>green>green>red>green>green>red>green>green.
Sent from my TECNO-Y5S using the Hovatek Forum App
This means the phone is stuck at trying to enter recovery mode (loop).
Can you get the phone into fastboot?
(12-04-2017, 10:02 AM)Kenneth.mtika How? Because even when i press the combination keys, nothing is happening, only the flashing led...
Sent from my TECNO-Y5S using the Hovatek Forum App
(12-04-2017, 10:02 AM)Kenneth.mtika How? Because even when i press the combination keys, nothing is happening, only the flashing led...
Sent from my TECNO-Y5S using the Hovatek Forum App
(24-04-2017, 12:18 PM)Kenneth.mtika Where is this PCB jumper?
Sent from my TECNO-Y5S using the Hovatek Forum App
(24-04-2017, 04:36 PM)Kenneth.mtika Like test points??
Sent from my TECNO-Y5S using the Hovatek Forum App