[Please help] TECNO M7 COMPLETELY DEAD
[Please help] TECNO M7 COMPLETELY DEAD
(21-04-2017, 11:08 AM)nossy93 Hello team Hovatek!!
kudos to you for great work you are doing here..
I have actually come with my own problem too..
My TECNO M7 started with a message that says "unfortunately,system ui is not responding" and i pressed the ok button but it will just pop up within seconds again.
I decided to pull out the battery and put it back in but instaed of coming ON,it showed "ENCRYPTION UNSUCCESFUL........RESET"..
Pressing the RESET button did nothing..
So i did another battery pull and rebooted to RECOVERY,did a format and rebooted but it got stucked at TECNO logo..
Straight to SP flashTool(flashing as usual)
i did the whole scatter file loading and bla bla,then i launched the flasing/downloading(hoping to flash it as usual)...
few seconds later,this strange error(S_DA_SDMMC_WRITE_FAILED) just came up...
i did some research and i was told to do a format with SPFLASHTOOL..
After doing the flashing,and then i tried downloading the ROM back to the phone with SPFLASHTOOL.
This error (S_DL_PMT_ERR_NO_SPACE) popped up (i was like wic wahala b dis na)...
Now phone shows no sign of life at all
#not powering on
#not charging..
#but sp flashtool stil recognizes it..
after a while it shows this error(BROM_ERROR:??(8)) now
i did some research again,i discovered that the EMMC chip has gone bad...
Any solution please...
(21-04-2017, 05:50 PM)hovatek(21-04-2017, 11:08 AM)nossy93 Hello team Hovatek!!
kudos to you for great work you are doing here..
I have actually come with my own problem too..
My TECNO M7 started with a message that says "unfortunately,system ui is not responding" and i pressed the ok button but it will just pop up within seconds again.
I decided to pull out the battery and put it back in but instaed of coming ON,it showed "ENCRYPTION UNSUCCESFUL........RESET"..
Pressing the RESET button did nothing..
So i did another battery pull and rebooted to RECOVERY,did a format and rebooted but it got stucked at TECNO logo..
Straight to SP flashTool(flashing as usual)
i did the whole scatter file loading and bla bla,then i launched the flasing/downloading(hoping to flash it as usual)...
few seconds later,this strange error(S_DA_SDMMC_WRITE_FAILED) just came up...
i did some research and i was told to do a format with SPFLASHTOOL..
After doing the flashing,and then i tried downloading the ROM back to the phone with SPFLASHTOOL.
This error (S_DL_PMT_ERR_NO_SPACE) popped up (i was like wic wahala b dis na)...
Now phone shows no sign of life at all
#not powering on
#not charging..
#but sp flashtool stil recognizes it..
after a while it shows this error(BROM_ERROR:??(8)) now
i did some research again,i discovered that the EMMC chip has gone bad...
Any solution please...
Sounds pretty much like a damaged emmc chip. If that's the case then it'll need to be replaced.
To verify, try readinfo using Miracle Box @ https://www.hovatek.com/forum/thread-13347.html
(25-04-2017, 11:20 AM)nossy93 @HOVATEK,here is the outcome of the READINfo from miracle box
(25-04-2017, 09:01 PM)hovatek(25-04-2017, 11:20 AM)nossy93 @HOVATEK,here is the outcome of the READINfo from miracle box
Can you get access to a working M7? A Miracle Box dump from a working phone 'might' be able to bypass the no space error
(05-05-2017, 05:02 PM)nossy93 boss,i haven't been able to lay my hands on any here...(seems that model is going obsolete )
(05-05-2017, 08:35 PM)freshtyt(05-05-2017, 05:02 PM)nossy93 boss,i haven't been able to lay my hands on any here...(seems that model is going obsolete )
you are quite right, old models are now obsolete
try flashing the M7 firmware using miracle box @ https://www.hovatek.com/forum/thread-14106.html
lets know the outcome
(06-05-2017, 08:53 AM)nossy93 Thanks boss...but that link u posted didn't contain tecno m7 miracle-flashable rom. it's just the how-to..
Thanks....