Hovatek Forum DEVELOPMENT Android How to root tecno w3
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


How to root tecno w3

How to root tecno w3

Gentle_soul
Gentle_soul
Gentle_soul
Techie Member
64
05-08-2017, 01:38 PM
#1



Please I followed all the due process to root my tecno w3 but at the end while pressing volume up key with power it just shows me white screen with some tiny blue colour please help me on what to do next.. I will appreciate it if you reply me ASAP

Sent from my TECNO-W3 using Hovatek mobile
This post was last modified: 05-08-2017, 01:54 PM by Gentle_soul.
hovatek
hovatek
hovatek
Administrator
49,570
05-08-2017, 10:57 PM
#2
(05-08-2017, 01:38 PM)Gentle_soul Please I followed all the due process to root my tecno w3 but at the end while pressing volume up key with power it just shows me white screen with some tiny blue colour please help me on what to do next.. I will appreciate it if you reply me ASAP

Sent from my TECNO-W3 using Hovatek mobile

1. What's your phone's Build Number?
2. Did you flash anything else aside from recovery.img?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Gentle_soul
Gentle_soul
Gentle_soul
Techie Member
64
06-08-2017, 12:26 AM
#3
(05-08-2017, 10:57 PM)hovatek
(05-08-2017, 01:38 PM)Gentle_soul Please I followed all the due process to root my tecno w3 but at the end while pressing volume up key with power it just shows me white screen with some tiny blue colour please help me on what to do next.. I will appreciate it if you reply me ASAP

Sent from my TECNO-W3 using Hovatek mobile

1. What's your phone's Build Number?
2. Did you flash anything else aside from recovery.img?

1. My phone build number is .. Tecno w3/MRA58K/W3-H806A1-M-170222V112.
2. I only flash the scattered file with the recovery with sp flash tool.


Sent from my TECNO-W3 using Hovatek mobile
Gentle_soul
Gentle_soul
Gentle_soul
Techie Member
64
06-08-2017, 06:51 PM
#4
1. My phone build number is .. Tecno w3/MRA58K/W3-H806A1-M-170222V112.
2. I only flash the scattered file with the recovery with sp flash tool.


Sent from my TECNO-W3 using Hovatek mobile
hovatek
hovatek
hovatek
Administrator
49,570
07-08-2017, 07:54 PM
#5



(06-08-2017, 06:51 PM)Gentle_soul 1. My phone build number is .. Tecno w3/MRA58K/W3-H806A1-M-170222V112.
2. I only flash the scattered file with the recovery with sp flash tool.


Sent from my TECNO-W3 using Hovatek mobile

Is the phone currently bricked or can still boot to home screen?
If its bricked then download the firmware for your Build @ https://www.hovatek.com/forum/thread-19340.html and flash using SP Flash tool @ https://www.hovatek.com/forum/thread-159.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Gentle_soul
Gentle_soul
Gentle_soul
Techie Member
64
09-08-2017, 10:43 AM
#6
Nope it is not bricked... I can still go to home menu and do task on it

Sent from my TECNO-W3 using Hovatek mobile
hovatek
hovatek
hovatek
Administrator
49,570
10-08-2017, 06:38 AM
#7
(09-08-2017, 10:43 AM)Gentle_soul Nope it is not bricked... I can still go to home menu and do task on it

Sent from my TECNO-W3 using Hovatek mobile

We already ported TWRP for your build. quite strange you're experiencing this issue
Did you dump / backup your firmware before flashing the recovery? Or do you have a firmware for your Build?
If not, dump your firmware in scatter format using Miracle Box @ https://www.hovatek.com/forum/thread-13347.html
After dumping
Flash the stock recovery.img uploaded by the OP @ https://www.hovatek.com/forum/thread-18448.html and let me know if your phone is able to boot into stock recovery again
This post was last modified: 10-08-2017, 06:43 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Gentle_soul
Gentle_soul
Gentle_soul
Techie Member
64
11-08-2017, 04:32 AM
#8
1. Please, should I tick save scatter file ? then save it on my PC then flash the recovery you gave me in it
2. Instead of my phone to connect with the miracle tool it's just charging and I have installed the vrom driver but it keeps charging Pls what should I do?


Sent from my TECNO-W3 using Hovatek mobile
hovatek
hovatek
hovatek
Administrator
49,570
11-08-2017, 11:53 AM
#9
(11-08-2017, 04:32 AM)Gentle_soul 1. Please, should I tick save scatter file ? then save it on my PC then flash the recovery you gave me in it
2. Instead of my phone to connect with the miracle tool it's just charging and I have installed the vrom driver but it keeps charging Pls what should I do?


Sent from my TECNO-W3 using Hovatek mobile

1. Tick save scatter file (in Miracle Box) but you flash the recovery I gave you using SP Flash tool
2. Update your VCOM drivers using https://www.hovatek.com/forum/thread-16839.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram