[Please help] Gionee s plus TWRP problem
[Please help] Gionee s plus TWRP problem
(18-12-2017, 11:26 AM)hovatek(16-12-2017, 08:48 PM)Shailesh Meena scatter file with this attechment is not right. because it caused the same problem like before when there was nothing to choose to flash.....
i used another scatter file from privious attechments.... and it opened
but phone still isnt opening in recovery right after flashing
Flash this patched boot.img at https://mega.nz/#!JbRXXZiL!riPBwdbwsUYYW...0TpHiYqiD0
then check for root using root checker
(18-12-2017, 11:32 AM)Shailesh Meena should i flash the recovery and preloader.bin too or just this boot.bin ????
It doesnt have its scatter file...... no boot.bin is showing in box which let you choose xyz.bin to flash.
(18-12-2017, 02:02 PM)X3non(18-12-2017, 11:32 AM)Shailesh Meena should i flash the recovery and preloader.bin too or just this boot.bin ????
It doesnt have its scatter file...... no boot.bin is showing in box which let you choose xyz.bin to flash.
the initial scatter file you provided had issues, dump the firmware of your device again and ensure to select all partitions when dumping.
once successful, use the scatter file from the new dump to flash the boot.bin
(18-12-2017, 02:02 PM)X3non(18-12-2017, 11:32 AM)Shailesh Meena should i flash the recovery and preloader.bin too or just this boot.bin ????
It doesnt have its scatter file...... no boot.bin is showing in box which let you choose xyz.bin to flash.
the initial scatter file you provided had issues, dump the firmware of your device again and ensure to select all partitions when dumping.
once successful, use the scatter file from the new dump to flash the boot.bin
(18-12-2017, 04:50 PM)Shailesh Meena i flashed the boot.bin
and then it directly opened in recovery mode right after flashing..... but it was gionee's default recovery so there was nothing i could have done....i tried " apply update from SDCard " option and selected supersu.zip file but it didn't install.....
then i let it boot normally
and it shows an error (Screenshot included)
I'm attaching the new scatter file...... last one was corrupted i guess... this on works fine.
(18-12-2017, 05:31 PM)X3non(18-12-2017, 04:50 PM)Shailesh Meena i flashed the boot.bin
and then it directly opened in recovery mode right after flashing..... but it was gionee's default recovery so there was nothing i could have done....i tried " apply update from SDCard " option and selected supersu.zip file but it didn't install.....
then i let it boot normally
and it shows an error (Screenshot included)
I'm attaching the new scatter file...... last one was corrupted i guess... this on works fine.
OK, so lets take it boot.bin flashed properly
download and install magisk manager on your device before checking root checker
(18-12-2017, 06:44 PM)Shailesh Meena i fleshed only boot.bin file successfully
then booted the phone
installed the Magisk.apk
which asked me to install magisk.zip file and after installing it failed (attaching log file)
magisk's screenshot is included
root checker says no root
PS: magisk asks me to install that .zip file via TWRP..... which i don't have for this gionee s plus build